[dradernh]

Originally Posted by K8_M235i

My favorite part about the Rogue kit is the improvement in feel. It feels like how BMW should make the shifters feel in performance cars. The shorter throw is just a bonus.

Where are you located now?

1) That's what the perfect kit should offer, isn't it.
2) Just outside Cincinnati. I got to where NH winters with ten feet of snow & ice finally became too much to deal with anymore.

Originally Posted by K8_M235i

The price will be the same as the m2 kit ($395), but for the group buy they will include trans mounts ($60) and shipping in the USA for free.

Thanks for pulling that together. Please put me down for a kit along with the trans mounts.

[K8_M235i]

Originally Posted by dradernh

Thanks for pulling that together. Please put me down for a kit along with the trans mounts.

Sounds good!

[K8_M235i]

For others interested:

Rogue set a deadline. We are going to let this run until the end of April. From there Rogue will take payment for the kits and produce them. It will take about 2 weeks to make them and then they will ship out.

If there are 8 kits payed for, they will make 8 kits. They will not make any extra and there will not be an opportunity to order one at a later date. This really is a one time offer.

[K8_M235i]

Went out for a drive since it was so nice out. Here's a cool angle of the shifter in action.

Please excuse my pale leg haha.

[dradernh]

Originally Posted by K8_M235i

Please excuse my pale leg.

No need to apologize if you're wearing shorts in Boston in early April.

I am very much looking forward to receiving my latest Rogue Engineering SSK; and, more especially, the difference it will make during my daily driving.

[WolfGTI]

So to clarify - I need to reach out to Rogue directly? or through you?

Thank you for your efforts organizing this!

[K8_M235i]

Originally Posted by dradernh

No need to apologize if you're wearing shorts in Boston in early April.

I've been wearing them around the house, but today was 60 so I figured I didn't have to change!

[K8_M235i]

Originally Posted by WolfGTI

So to clarify - I need to reach out to Rogue directly? or through you?

Thank you for your efforts organizing this!

I had in the original post that you should reach out to Rogue directly, but since we're trying to make this a bit more organized I am collecting names now.

I have you down.

I should edit that part out.

Thank you!

[WolfGTI]

Thanks!! That's what had me a bit confused!

Originally Posted by K8_M235i

I had in the original post that you should reach out to Rogue directly, but since we're trying to make this a bit more organized I am collecting names now.

I have you down.

I should edit that part out.

Thank you!

[Dylan86]

Signed up! Has it shipped yet!? LOL

[K8_M235i]

Originally Posted by Dylan86

Signed up! Has it shipped yet!? LOL

Lol. It's something to look forward to while everyone is still stuck in their house.

[Sportstick]

Originally Posted by K8_M235i

Lol. It's something to look forward to while everyone is still stuck in their house.

Certainly looking forward to it, and thanks for that encouraging video!

I've taken a couple of solo non-stop trips around our city's beltway...a nice 30-40 minute diversion to ward off the cabin fever.

Costco gas pumps are well-spaced and quite empty these days as well. With a mask and set of nitrile gloves, not an unreasonable opportunity either.

[4Hockey4]

I'd like one for 16' 235i, PM sent

Chatted with shop, said 3 hours and that includes trans mount. Maybe 2.5, but thats high #

[K8_M235i]

Originally Posted by Sportstick

Certainly looking forward to it, and thanks for that encouraging video!

I've taken a couple of solo non-stop trips around our city's beltway...a nice 30-40 minute diversion to ward off the cabin fever.

Costco gas pumps are well-spaced and quite empty these days as well. With a mask and set of nitrile gloves, not an unreasonable opportunity either.

The one time that gas is super cheap I don't want to go to the gas stations!

The Costco near me is 1.3x for 87.

The station that I go to is about 2.40 for 93.

I've been wearing gloves too.

[4Hockey4]

I'd like one for 16' 235i, PM sent

Chatted with shop, said 3 hours and that includes trans mount. Maybe 2.5, but thats high #

[K8_M235i]

Originally Posted by 4Hockey4

I'd like one for 16' 235i, PM sent

Chatted with shop, said 3 hours and that includes trans mount. Maybe 2.5, but thats high #

I replied to your pm and you are on the list!

[dradernh]

Originally Posted by K8_M235i

The station that I go to is about 2.40 for 93.

The Shell station where I buy 93 has it for $2.20 today. That might be low enough to get me out of the house!

[Sportstick]

Originally Posted by dradernh

The Shell station where I buy 93 has it for $2.20 today. That might be low enough to get me out of the house!

There are other threads about gasoline and this is admittedly off-topic (apologies), but the other advantage of Costco besides quality and being beyond Top Tier requirements is that you never have the chance of a pump problem with a credit card that might force you to "go inside". Guaranteed social distancing refueling!

[4Hockey4]

Run Sunoco 93 and its 2.18

[K8_M235i]

Originally Posted by Sportstick

There are other threads about gasoline and this is admittedly off-topic (apologies), but the other advantage of Costco besides quality and being beyond Top Tier requirements is that you never have the chance of a pump problem with a credit card that might force you to "go inside". Guaranteed social distancing refueling!

Originally Posted by 4Hockey4

Run Sunoco 93 and its 2.18

Originally Posted by dradernh

The Shell station where I buy 93 has it for $2.20 today. That might be low enough to get me out of the house!

No worries on the detour of the thread haha.

I typically go to shell or speedway. Boston isn't quite as cheap yet.

The closet Costco for me is right next to a outdoor shopping center so it's always mobbed.

[f22b58]

Put me on the list, PM sent.

[9t2hoo]

2 questions. Would the kit fit an M240i? And I have the UUC SSK now, but I’m not really happy with it (there is a ton of NVH). Would the Rogue need anything from the OEM shifter (that I no longer have) or will it stand on its own? Thanks for organizing this.