[MarcoZandrini]

Here's the grille mesh on the US Amazon site.

https://www.amazon.com/dp/B07B93TQSW...v_ov_lig_dp_it

[MarcoZandrini]

Originally Posted by aerobod

I just finished using black aluminium mesh to cover all 5 of the grille openings to protect against damge. I obtained the material from here: https://www.amazon.ca/Lanlan-6x12mm-.../dp/B07B93TQSW

So you basically removed the front bumper, etc.?

[aerobod]

Originally Posted by MarcoZandrini

So you basically removed the front bumper, etc.?

Yes, it isn't possible to remove the lower grille inserts from the front. Doesn't take too much time to remove (about 30 mins), but I found it easier to remove the forward wheel well liners as opposed to moving them out of the way to access the two bumper to body panel screws on each side. Here is the TIS procedure: https://www.newtis.info/tisv2/a/en/f...per/1VnXmQj6I7

[aerobod]

Originally Posted by MarcoZandrini

Here's the grille mesh on the US Amazon site.

https://www.amazon.com/dp/B07B93TQSW...v_ov_lig_dp_it

Interesting that it is more than twice the price after USD to CAD conversion compared with the Canadian Amazon site, I usually expect items to be cheaper in the US.