07-17-2019, 06:22 PM | #1 |
Lieutenant
114
Rep 448
Posts |
adding a 12 volt socket to drivers area
My iPhone holder also provides wireless charging if connected to a power source via its USB-C port. I like to see both the car screen and the phone screen as the car screen shows a map and the phone screen shows turn-by-turn instructions. See image.
Any idea on installing a 12 volt socket somewhere in the driver's side foot well area? I am trying to avoid having to run a wire from the fuse box in the trunk all the way to the front of the car. Also don't want to drill a hole in the firewall to access the fuse box in the engine compartment. I am already using the usb in the console for USB music. Thanks in advance for any ideas. |
07-17-2019, 06:28 PM | #2 |
Major General
4515
Rep 8,942
Posts |
Add a usb to your glovebox. Problem solved.
__________________
2022 Macan S
2016 F31 328i xDrive Sport Wagon 2006 E46 330ci ZHP Convertible |
Appreciate
0
|
07-17-2019, 09:35 PM | #3 |
Lieutenant
114
Rep 448
Posts |
|
Appreciate
0
|
07-18-2019, 03:29 AM | #4 |
Major General
4515
Rep 8,942
Posts |
Nope. Just from radio to glovebox.
__________________
2022 Macan S
2016 F31 328i xDrive Sport Wagon 2006 E46 330ci ZHP Convertible |
Appreciate
0
|
07-18-2019, 05:54 AM | #5 |
Major General
4515
Rep 8,942
Posts |
Another option if your car has the phone cradle and you're not using it, you can remove that and replace with USB to use for phone charge.
I did thAt in my F31 and did the glovebox USB in my F23. Both are easy.
__________________
2022 Macan S
2016 F31 328i xDrive Sport Wagon 2006 E46 330ci ZHP Convertible |
Appreciate
0
|
07-18-2019, 10:11 AM | #6 |
Major
709
Rep 1,066
Posts |
You can also tap the back of your existing cigarette lighter for power.
__________________
Current: 20 M340i
Sold: 19 x3 30i X drive, 18 230i X drive Convertible 18 x3, 30i X drive 16 428i Convertible, 16 X1 X drive, 14 i3 Rex, 14 328i, 14 x1 28i X drive, 08 328i, 03 M5, 99 323i Convertible, 00 z3 M Roadster, 99 328i, 00 323i |
Appreciate
0
|
07-18-2019, 12:52 PM | #7 | |
Major General
4515
Rep 8,942
Posts |
Quote:
The glovebox and cradle options do not require a tap and plug directly into the port on the radio. Glovebox you pull the radio out to connect the wire, cradle you pull the rear vents to access the wiring. Unplug cradle, plug in USB socket.
__________________
2022 Macan S
2016 F31 328i xDrive Sport Wagon 2006 E46 330ci ZHP Convertible |
|
Appreciate
0
|
07-24-2019, 02:44 PM | #8 |
Major
1254
Rep 1,352
Posts |
This is fairly easy to do. The 12V socket is part # 61346973037.
You do need to get power there (you can tap into the 12V socket in the centre console or run it to your fusebox and use a fuse tap). |
Appreciate
0
|
07-27-2019, 07:12 PM | #9 | |
Private
46
Rep 85
Posts |
Quote:
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|