01-17-2020, 01:57 PM | #1 |
New Member
3
Rep 12
Posts |
Where/how to fill coolant
I had to replace a punctured radiator for a 2016 m235 xdrive auto. I have to replace the coolant.
From what I have seen online, it looks like one would need to use a vacuum tool to replace the coolant and flush the system? If so, where do I connect the vacuum tool? Or, could you just keep filling the reservoir then go through the bleed process? Can anyone chime in on this? I appreciate it! |
01-17-2020, 04:37 PM | #2 |
Major General
3074
Rep 5,577
Posts |
|
Appreciate
0
|
01-20-2020, 11:24 AM | #3 |
New Member
3
Rep 12
Posts |
So, I basically used the vacuum tool to refill my coolant and check for leaks and it worked like a charm hooking it up to the coolant reservoir. I then proceeded to do the car's bleed process that took about 12 minutes. Looks like everything is good.
|
Appreciate
0
|
01-21-2020, 10:33 AM | #5 |
New Member
3
Rep 12
Posts |
https://www.ecstuning.com/b-schwaben.../024948sch01a/
Schwaben Coolant Vacuum Fill Tool Mfg Part # 024948SCH01A |
Appreciate
1
overcoil3073.50 |
Post Reply |
Bookmarks |
|
|