12-17-2018, 09:37 AM | #1 |
Private First Class
60
Rep 141
Posts |
405M Replica Fitment Question
Sorry for asking, but I am an aftermarket wheel noob. I searched and did not find the information I am seeking.
I am considering a set of aftermarket 405M replicas with the following specifications: Front: 19x8.5 et35 Rear: 19x9.5 et37 Will these offsets fit my 2017 M240i convertible (stock suspension)? Bonus question: what tire size(s) should I look for? Thanks. |
12-18-2018, 11:35 AM | #2 | |
Private
16
Rep 58
Posts |
Quote:
|
|
Appreciate
0
|
12-20-2018, 11:22 PM | #3 |
First Lieutenant
47
Rep 370
Posts |
Head on over to the e90 3 series forum tire section and play around with the wheel and tire calculator there. That should give you a better idea of what different size wheels will do to clearance from the struts and poke.
https://www.e90post.com/forums/forumdisplay.php?f=12 |
Appreciate
0
|
12-23-2018, 07:33 AM | #4 |
Private
23
Rep 66
Posts |
Front and rear will both fit but you probably can't run wider than 255/30 rear without adding some camber. 235/35 and 225/35 will both fit up front, but the 235's will likely need a fender roll. There is a guy on here running 235/265 MPSS on wheels with similar offsets and widths (same front rear is et40) so it can be done. I'd copy the thread here but can figure out how to do that on the app and it should be easy to find on one of the 19inch wheel threads.
__________________
2015 BSM M235i 6MT Dinan Turbo|KWV3|GC Camber Plates|OEMConcept 437M|Kumho PS91 225/255|Wagner HFC|MHD Custom Tune (Weekend Warrior)
2017 Alpine White X3 35i M-Sport (Daily Driver) 2020 Alpine White X7 40i M-Sport (Wife's Car) |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|