[FutbolManiac]

Originally Posted by Denf!

WoW! I'm considering to run a square setup with 235s... Does 8.5 ET 43 19 really fit plug and play without any rubbing issues in the front with 235/35/19??
In the back it should be a easz fit..right?

Here in Europe people are deeply concerned when thinking about running anything more than 225 in the front if 8.5J wheels are used...

Originally Posted by Denf!

WoW! I'm considering to run a square setup with 235s... Does 8.5 ET 43 19 really fit plug and play without any rubbing issues in the front with 235/35/19??
In the back it should be a easz fit..right?

Here in Europe people are deeply concerned when thinking about running anything more than 225 in the front if 8.5J wheels are used...

Yes , I haven't had any issues or rubbing. I think the 43 offset must be the perfect offset to run a 235 in front. Stock suspension not sure how it would be if I lower.

[Denf!]

@Futbolmaniac: Thank you for the feedback! Could you post a picture taken from the front where one can see how much the rubber sticks out?

That would futher help me make up my mind

[FutbolManiac]

Originally Posted by Denf!

@Futbolmaniac: Thank you for the feedback! Could you post a picture taken from the front where one can see how much the rubber sticks out?

That would futher help me make up my mind

Sure here are a couple after I just washed it.

[Denf!]

FutbolManiac Thanks for the pictures, your car looks very nice in that color! And the wheels don't look excessively pokey.

Did you get a chance to beat the car around some corners without any issues?

Cheers from Switzerland

[FutbolManiac]

Originally Posted by Denf!

FutbolManiac Thanks for the pictures, your car looks very nice in that color! And the wheels don't look excessively pokey.

Did you get a chance to beat the car around some corners without any issues?

Cheers from Switzerland

Thanks...

Yes, I haven't tracked the car or anything but I definitely get on it some in corners or curves at higher speeds and haven't had any rubbing or issues to worry about. I think you will be fine with the same size setup.

The only thing I haven't been able to check is how close it is to the suspension - I'm guessing I am only a couple of mm away from them but definitely cleared.

If I want to drop it then I may have issues. For now, I'm not dropping it any lower.

[dsuhiti]

Originally Posted by VMRWheels

Please email us at sales@velocitymotoring.com including your order details (when and where you ordered from, who you have already contacted) so we can help resolve this issue.

Thank you, have just CC'd you in the email.

All please note, the VMR wheels are fine, it is the supplier that is re-drilling wrong sized wheels and selling them off as "correct" fitment that is the issue hence the vibration I am experiencing.

[McBill]

Does anyone on here have an example of a square 19" v802 setup on a stock suspended xdrive? I have a 340ix m sport and am tossing back and forth between a square setup and a staggered setup in 19's. I've seen plenty of staggered setups in this style, but not a 19 square yet.

[JG_Media9]

Just copped these VMR 801s

more photos on my Instagram
https://www.instagram.com/speedy_gonz_f22/

[JD11937]

Snapped a few images during a Sunday morning drive. Kept the VMR wheels on through the winter and they have held up well to our horrible NY roads. Even blew a tire on a nasty pothole and the wheel is still perfect.

[VMRWheels]

Originally Posted by JD11937

Snapped a few images during a Sunday morning drive. Kept the VMR wheels on through the winter and they have held up well to our horrible NY roads. Even blew a tire on a nasty pothole and the wheel is still perfect.

Thank you for sharing and posting! Sorry to hear about your tire, but we're glad the wheels are still good and you're okay. Your color combo looks really good, and that's a nice shot!

[HopefulAbandon]

Originally Posted by Speedy Gonz F22

Just copped these VMR 801s

more photos on my Instagram
https://www.instagram.com/speedy_gonz_f22/

What finish is that? Is that hyper silver or mercury black metallic? The V801's look amazing on F22's

[JG_Media9]

Originally Posted by HopefulAbandon

What finish is that? Is that hyper silver or mercury black metallic? The V801's look amazing on F22's

hyper silver!

[wfujay]

Finally got my V710FF's mounted yesterday. Staggered setup wrapped in Continental ExtremeContact Sport's and sitting on MSS Sport springs.

[VMRWheels]

Originally Posted by wfujay

Finally got my V710FF's mounted yesterday. Staggered setup wrapped in Continental ExtremeContact Sport's and sitting on MSS Sport springs.

Thank you for posting! Your setup is looking good. Sits just right!

[jules_78th]

Finally got the v802 crystal black on. Brandon thank you my man!! I ended up getting
HUF RDE027V21 TPMS Sensor- 433 and they worked great. Plug and play.

Spec
VMR v802 Crystal Black
19x8.5 ET 35 wrapped on 225/35/19
19.x9.5 ET 45 wrapped on 255/30/19

https://www.flickr.com/photos/146072840@N06/albums

[4Hockey4]

Originally Posted by jules_78th

Finally got the v802 crystal black on. Brandon thank you my man!! I ended up getting
HUF RDE027V21 TPMS Sensor- 433 and they worked great. Plug and play.

Spec
VMR v802 Crystal Black
19x8.5 ET 35 wrapped on 225/35/19
19.x9.5 ET 45 wrapped on 255/30/19

https://flic.kr/p/2iLfdgK

https://www.flickr.com/photos/146072840@N06/albums

Thats what I want on my MG coupe...did you research strength versus stock (I have same 7.5 rims) ? You have someone local configure offset and width etc ?

I'd like to go 18 8.5 245/35 Square

man looks really sharp congrats .

[ANosyGuy]

Hi guys, new to wheel specs and learning so much from everyone. Looking to get new wheels for my 2020 M240 xDrive

Any downside in running
18x8 et32 225/40/18 front
18x9.5 et45 255/35/18 rear?
would the wheel width differential between front and rear be a problem?
diameters check out, clearance should be good, and seems like that wound decrease front tire stretch.

Thanks in advance

[VMRWheels]

Originally Posted by jules_78th

Finally got the v802 crystal black on. Brandon thank you my man!! I ended up getting
HUF RDE027V21 TPMS Sensor- 433 and they worked great. Plug and play.

Spec
VMR v802 Crystal Black
19x8.5 ET 35 wrapped on 225/35/19
19.x9.5 ET 45 wrapped on 255/30/19

https://flic.kr/p/2iLfdgK

https://www.flickr.com/photos/146072840@N06/albums

Glad we were able to help! Those V802's are looking sharp!!

Originally Posted by ANosyGuy

Hi guys, new to wheel specs and learning so much from everyone. Looking to get new wheels for my 2020 M240 xDrive

Any downside in running
18x8 et32 225/40/18 front
18x9.5 et45 255/35/18 rear?
would the wheel width differential between front and rear be a problem?
diameters check out, clearance should be good, and seems like that wound decrease front tire stretch.

Thanks in advance

We don't offer anything in an 18x8 ET32, but we've always stuck with the 8.5 ET35 or 8.5 ET45 with a 3mm spacer (ET42) without having any issues.

[HopefulAbandon]

Been about a week since I had these v802's put on, loving them a bunch. Thanks again Brandon!

[N55guy]

V710
F: 19x8.5 et 35 (225/35/19) with a 12mm spacer
R: 19x9.5 et 45 (255/30/19)

I've been running this very popular wheel setup without the 12mm spacer for over 2 years. It's always bothered me that the 225s look stretched in the front and makes the front wheel look more tucked into the wheel well. So today I randomly decided to throw on a 12mm spacer (smallest one I had in my garage) because what else is there to do...
I'm actually loving the way it looks, I'm surprised I don't see this done more often. Is there maybe something I'm missing that makes this a terrible idea?

[stratatak7]

Has anyone tried 235/40/18 on stock 228i xDrive suspension with a square setup on 18x8.5 et35? I have v802s and I would love to go wider but am concerned about rubbing the fender. The car is not lowered. Included pics with current 225/40/18 Pilot Sport AS3+ tires. Any help would be greatly appreciated!

[Solid67]

I have the same question as the guy above but doing a square setup with 245s on 18 or 19.