[nazali]

I'm on the lookout for some 18" rim's for my 2 series for next winter
want to put my existing winter tires on them.

Any idea what I should be looking for, will any bmw 18's work, for example, I saw an ad for 4 "BMW 8Jx18 FULL SET 5*120 ET24 off set Wheels Bore 72.6 Hub centric"

from my spec sheet I found I should have "Standard :Wheels / Tire Data Bolt pattern (BCD) 5x120mm center bore 72.6mm"

but not sure of the offset, I "thought my existing ones where 35" I could be wrong, without taking the rim's off and checking, also not sure of the width
again from spec sheet I thought they were 7.5Jx18 ET45

any ideas

[nazali]

I just found a VIN sheet for my car, it shows "2" ?

20X
(on the english side) 18"m Law.do.s.spoke 662 M B.j.as
(on the german side) 18"m Lmr.do.spei. 719 M B.jet.gz.
and realoem only shows 719's

confused

[aerobod]

The standard 2-series offset is ET45 for front and rear 18x7.5" wheels and ET52 for rear 18x8" wheels for staggered fitment.

ET24 will likely rub, but 225/40-18 winter tyres are probably OK up to about ET35 and either 7.5" or 8" wheel widths.

[nazali]

I am unhappy again

I scratched up my alloys getting too close to the drive through as you have to turn a corner.

BUGGGGGGGGER FUQQQQQQQ I didnt get a chance to put my rim blades on as the weather is yet a bit to cold for the adhesive to dry.

Plus I changed my mind on the alloy gators.

GOSSSSHHHHHHHH

sad I am sad I am mad and I am mad at me