Mud flaps?

H2O_Doc · 10-12-2020, 05:36 PM

Quote:

Originally Posted by Liandri

Quote:

Originally Posted by WolfGTI

Yup - that's my car, I drove up to Tommy's on Friday and he used my car as the template.

Nice! They came out good! What's the material like? Do they flap on the highway or are they more ridgid?

These wouldn't flap at all. Just got mine today.

WolfGTI · 10-12-2020, 06:55 PM

Thanks! - They are flexible - but no flapping at speeds approaching triple digits (on a controlled road course).

Quote:

Originally Posted by Liandri

Nice! They came out good! What's the material like? Do they flap on the highway or are they more ridgid?

Liandri · 10-14-2020, 12:44 PM

Quote:

Originally Posted by WolfGTI

Thanks! - They are flexible - but no flapping at speeds approaching triple digits (on a controlled road course).

Thanks for the feedback! Ordered a set last night, they'll be a nice addition to the winter getup

iv-128i · 10-14-2020, 01:48 PM

Quote:

Originally Posted by Liandri

Quote:

Originally Posted by WolfGTI

Thanks! - They are flexible - but no flapping at speeds approaching triple digits (on a controlled road course).

Thanks for the feedback! Ordered a set last night, they'll be a nice addition to the winter getup

Where did you ordered from ?
Thx

John in VA · 10-14-2020, 07:55 PM

Quote:

Originally Posted by iv-128i

Where did you ordered from? Thx

https://www.facebook.com/TommyLGarage/

iv-128i · 10-14-2020, 08:50 PM

Quote:

Originally Posted by John in VA

Quote:

Originally Posted by iv-128i

Where did you ordered from? Thx

https://www.facebook.com/TommyLGarage/

Quote:

Originally Posted by John in VA

Quote:

Originally Posted by iv-128i

Where did you ordered from? Thx

https://www.facebook.com/TommyLGarage/

Thank you

H2O_Doc · 10-17-2020, 11:45 AM

Installed mine. I'm very pleased. I added a bit of clear scratch resistant tape where the flap touches the bumper cover (back only). Video suggests removing rear wheels, but I found it not too difficult to install the rears with wheels on.

Si-M240i · 10-17-2020, 11:47 AM

Quote:

Originally Posted by H2O_Doc

Installed mine. I'm very pleased. I added a bit of clear scratch resistant tape where the flap touches the bumper cover (back only). Video suggests removing rear wheels, but I found it not too difficult to install the rears with wheels on.

Any drilling? And did they line up nice and even

H2O_Doc · 10-17-2020, 11:50 AM

Quote:

Originally Posted by Si-M240i

Quote:

Originally Posted by H2O_Doc

Installed mine. I'm very pleased. I added a bit of clear scratch resistant tape where the flap touches the bumper cover (back only). Video suggests removing rear wheels, but I found it not too difficult to install the rears with wheels on.

Any drilling? And did they line up nice and even

Apologies, images didn't upload. No drilling. They linger up well to my satisfaction.

Si-M240i · 10-23-2020, 01:02 PM

Quote:

Originally Posted by H2O_Doc

Quote:

Originally Posted by Si-M240i

Quote:

Originally Posted by H2O_Doc

Installed mine. I'm very pleased. I added a bit of clear scratch resistant tape where the flap touches the bumper cover (back only). Video suggests removing rear wheels, but I found it not too difficult to install the rears with wheels on.

Any drilling? And did they line up nice and even

Apologies, images didn't upload. No drilling. They linger up well to my satisfaction.

I have fitted these this week too 👍

Fergusonic · 11-18-2021, 02:57 PM

Front mud flaps M240i: I simply went to Advance Auto and bought a set of (flat-generic) mudflaps, cut them to shape, drilled mtg holes, and mounted them with push-pin rivets . Total cost under $20.00.
pic on my bio page.

JG_Media9 · 11-21-2021, 10:59 AM

Quote:

Originally Posted by Si-M240i

Has anyone managed to source front and rear mud flaps for an M240i LCi?

Just looking for small, neat and practical. Not huge sheets of rubber mat like Impreza's and Evo's have

Hit up Tommy L Garage on instagram!

tgmsocal · 12-02-2021, 06:02 AM

I have also discovered a guy on Etsy that makes the front ones only (so far, working on rear) for 19.99. It's a mini-version of what Tommy makes so his version probably still better overall but this obviously a cheaper option for front if you're interested. I found some carbon fibers ones on my searching, as well, but those were of course much more expensive.

I have no connection and don't want to link it so just google "Etsy bmw f22 mud flap" and it is first result. Comes with rivets, etc.

FWIW, I'm probably going to buy Tommy's as I think they look a bit better and come with front and rears.

jLona240 · 12-11-2021, 12:13 PM

Anyone have these on a M240?

I cannot get the screw to go into the wheel well in the front.

Any advice?

KennyFSU · 12-13-2021, 07:09 AM

Quote:

Originally Posted by jLona240

Anyone have these on a M240?

I cannot get the screw to go into the wheel well in the front.

Any advice?

Even if you turn the wheel left or right?

Rocky58 · 01-06-2022, 10:49 AM

Quote:

Originally Posted by H2O_Doc

Apologies, images didn't upload. No drilling. They linger up well to my satisfaction.

No drilling on the rear? His site shows drilling for the rear flaps on video.

jLona240 · 01-11-2022, 02:04 PM

Quote:

Originally Posted by Rocky58

No drilling on the rear? His site shows drilling for the rear flaps on video.

No drilling needed on the rears.

He includes new hardware to bolt them in the back. I also didn't need to take my rear wheels off.

10-17-2020, 11:45 AM	#29
H2O_Doc First Lieutenant 512 Rep 357 Posts Drives: BMW M2C, GLB-250, C7 Z51 Join Date: Mar 2020 Location: VA iTrader: (0)	Installed mine. I'm very pleased. I added a bit of clear scratch resistant tape where the flap touches the bumper cover (back only). Video suggests removing rear wheels, but I found it not too difficult to install the rears with wheels on. Attached Images
	Appreciate 2 WolfGTI716.00 selbyp93163.50 Quote

11-18-2021, 02:57 PM	#33
Fergusonic New Member 0 Rep 25 Posts Drives: 2020 M240iX Join Date: Oct 2021 Location: Kokomo, In iTrader: (0)	Front mud flaps M240i: I simply went to Advance Auto and bought a set of (flat-generic) mudflaps, cut them to shape, drilled mtg holes, and mounted them with push-pin rivets . Total cost under $20.00. pic on my bio page.
	Appreciate 0 Quote

12-02-2021, 06:02 AM	#35
tgmsocal Lieutenant 156 Rep 597 Posts Drives: 2016 M235i 6MT Join Date: Jun 2016 Location: OH iTrader: (0)	I have also discovered a guy on Etsy that makes the front ones only (so far, working on rear) for 19.99. It's a mini-version of what Tommy makes so his version probably still better overall but this obviously a cheaper option for front if you're interested. I found some carbon fibers ones on my searching, as well, but those were of course much more expensive. I have no connection and don't want to link it so just google "Etsy bmw f22 mud flap" and it is first result. Comes with rivets, etc. FWIW, I'm probably going to buy Tommy's as I think they look a bit better and come with front and rears.
	Appreciate 0 Quote

12-11-2021, 12:13 PM	#36
jLona240 Private 30 Rep 54 Posts Drives: 2017 M240i xDrive Join Date: Dec 2021 Location: PA iTrader: (0) Garage List 2017 BMW M240i [9.00]	Anyone have these on a M240? I cannot get the screw to go into the wheel well in the front. Any advice?
	Appreciate 0 Quote