New Release! SPL Front Lower Control Arms Street Version F2x F3x

teinesina · 04-21-2018, 08:33 AM

Following. I would like to know how much camber can be gained with these. I was hoping for an option that was was less pricey than camber plates though...

HP Autosport · 04-23-2018, 10:48 PM

Quote:

Originally Posted by teinesina

Following. I would like to know how much camber can be gained with these. I was hoping for an option that was was less pricey than camber plates though...

We still don't have that data from SPL.

Perhaps an email to them directly will speed up the process.

230iZTR · 05-22-2018, 11:20 AM

Quote:

Originally Posted by HP Autosport

yes, just like the F8x M LCA will fit the F2x and F3x.

http://www.2addicts.com/forums/showthread.php?t=1250352

Are these SPL tension rods a suitable replacement for the BMW F8x tension struts that are often paired with the F8x control arm on the 2er?

http://www.splparts.com/products/spl-titanium-front-tension-rods-bmw-e9x-e8x-f8x.html

HP Autosport · 05-22-2018, 11:30 AM

Quote:

Originally Posted by 230iZTR

Are these SPL tension rods a suitable replacement for the BMW F8x tension struts that are often paired with the F8x control arm on the 2er?

http://www.splparts.com/products/spl...x-e8x-f8x.html

Yes, but you will need to add spacers to make it work since M control arms at the frame side is narrower.

HP Autosport · 05-23-2018, 08:49 PM

Quote:

Originally Posted by 230iZTR

Are these SPL tension rods a suitable replacement for the BMW F8x tension struts that are often paired with the F8x control arm on the 2er?

http://www.splparts.com/products/spl...x-e8x-f8x.html

Just spoke to SPL. The F2x and F3x version of the adjustable tension arm is being worked on. Shouldn't be long.

Shadowfax028 · 02-06-2019, 04:07 PM

Bump!! Any information on the amount of negative camber gained?

HP Autosport · 02-06-2019, 04:32 PM

Quote:

Originally Posted by Shadowfax028

Bump!! Any information on the amount of negative camber gained?

F2x and F3x lower control arms have not been released yet so we don't have any data.

Shadowfax028 · 02-06-2019, 11:02 PM

Quote:

Originally Posted by HP Autosport

F2x and F3x lower control arms have not been released yet so we don't have any data.

Thank you, I'm very intrested. Also shoot me a PM for a set of Ohlins and EDC delete kit. Also a good camber plate.

HP Autosport · 11-06-2019, 11:30 PM

Updated with the correct street version of the lower control arms for the F2x and F3x.

SPL has also increased its coverage for the F2x and F3x chassis.

https://www.hpashop.com/SPL-Front-Te...SPL-TR-F3X.htm

https://www.hpashop.com/SPL-Adjustab...PL-RUA-F3X.htm

https://www.hpashop.com/SPL-Titanium...-RTAEL-F3X.htm

Maynard · 11-11-2019, 06:06 PM

Any of that stuff work with x-drive?

HP Autosport · 11-13-2019, 04:40 PM

Quote:

Originally Posted by Maynard

Any of that stuff work with x-drive?

No, not at this time.

Maynard · 11-13-2019, 05:15 PM

bummer - handling is my main interest and those are nice looking pieces.

HP Autosport · 11-14-2019, 12:53 PM

Quote:

Originally Posted by Maynard

bummer - handling is my main interest and those are nice looking pieces.

Give SPL a call and show your interest in xi products.

goodNIGHT · 11-17-2019, 09:13 PM

Well Jackie Ding definitely endorsed SPL parts after setting a 1:50.0 in his a90 Supra at buttonwillow!!!

HP Autosport · 11-18-2019, 12:51 PM

Quote:

Originally Posted by goodNIGHT

Well Jackie Ding definitely endorsed SPL parts after setting a 1:50.0 in his a90 Supra at buttonwillow!!!

Do post the video!

goodNIGHT · 11-18-2019, 08:28 PM

Well this is him talking about installing the front and rear SPL suspension parts.

But he also gives a shout out to SPL in his Ig after his run at the GTA Finals.

M parts = sports car??
SPL parts = race car???

HP Autosport · 11-18-2019, 10:51 PM

Quote:

Originally Posted by goodNIGHT

Well this is him talking about installing the front and rear SPL suspension parts.

But he also gives a shout out to SPL in his Ig after his run at the GTA Finals.

M parts = sports car??
SPL parts = race car???

Thanks for posting the video!

SPL parts are mostly rod ends and should be reserved for a track car.

The monoball bearing for the thrust arm is liveable on the street and so are the street version of the lower control arms in this thread.

Isoleucine · 02-20-2020, 01:16 PM

These have been around for a little while now, have you managed to get any data on the negative camber adjustment range they provide?

HP Autosport · 02-20-2020, 03:35 PM

Quote:

Originally Posted by Isoleucine

These have been around for a little while now, have you managed to get any data on the negative camber adjustment range they provide?

About 5 degrees.

04-21-2018, 08:33 AM	#23
teinesina Enlisted Member 6 Rep 44 Posts Drives: M240xi Join Date: Jan 2018 Location: Nevada iTrader: (0)	Following. I would like to know how much camber can be gained with these. I was hoping for an option that was was less pricey than camber plates though...
	Appreciate 0 Quote

02-06-2019, 04:07 PM	#28
Shadowfax028 Private First Class 46 Rep 148 Posts Drives: 2016 BMW M235i Join Date: Feb 2012 Location: Houston iTrader: (0)	Bump!! Any information on the amount of negative camber gained?
	Appreciate 1 230iZTR315.50 Quote

11-06-2019, 11:30 PM	#31
HP Autosport Supreme Allied Commander 3815 Rep 54,307 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	Updated with the correct street version of the lower control arms for the F2x and F3x. SPL has also increased its coverage for the F2x and F3x chassis. https://www.hpashop.com/SPL-Front-Te...SPL-TR-F3X.htm https://www.hpashop.com/SPL-Adjustab...PL-RUA-F3X.htm https://www.hpashop.com/SPL-Titanium...-RTAEL-F3X.htm Attached Images
	Appreciate 0 Quote

11-11-2019, 06:06 PM	#32
Maynard Colonel 3833 Rep 2,869 Posts Drives: 228iX & M2C Join Date: Mar 2016 Location: Upstate NY iTrader: (1)	Any of that stuff work with x-drive?
	Appreciate 0 Quote

11-13-2019, 05:15 PM	#34
Maynard Colonel 3833 Rep 2,869 Posts Drives: 228iX & M2C Join Date: Mar 2016 Location: Upstate NY iTrader: (1)	bummer - handling is my main interest and those are nice looking pieces.
	Appreciate 0 Quote

11-17-2019, 09:13 PM	#36
goodNIGHT Private First Class 107 Rep 187 Posts Drives: 2015 M235i Join Date: Jun 2015 Location: LOS ANGELES iTrader: (1)	Well Jackie Ding definitely endorsed SPL parts after setting a 1:50.0 in his a90 Supra at buttonwillow!!!
	Appreciate 0 Quote

11-18-2019, 08:28 PM	#38
goodNIGHT Private First Class 107 Rep 187 Posts Drives: 2015 M235i Join Date: Jun 2015 Location: LOS ANGELES iTrader: (1)	Well this is him talking about installing the front and rear SPL suspension parts. But he also gives a shout out to SPL in his Ig after his run at the GTA Finals. M parts = sports car?? SPL parts = race car???
	Appreciate 0 Quote

02-20-2020, 01:16 PM	#40
Isoleucine Enlisted Member 3 Rep 30 Posts Drives: 2017 M240i Join Date: Aug 2019 Location: CO iTrader: (0)	These have been around for a little while now, have you managed to get any data on the negative camber adjustment range they provide?
	Appreciate 0 Quote