[KennyFSU]

Originally Posted by Gepeto

(Plan is to wear through that set and then move to 245/45 once I am sure it will fit right)

Curious as to why you are choosing a 45 profile tire and not 40. Seems like a lot more sidewall flex.

[SkyeC]

Maybe he meant 35. A 245/45 is way too tall.

[Gepeto]

Originally Posted by SkyeC

Maybe he meant 35. A 245/45 is way too tall.

You got that right, meant 35. Corrected original post so I don’t confuse anyone. Thanks to both of you for pointing it out!

[PeanuKeeyes]

Originally Posted by SkyeC

18x8.5 45, 5mm spacer in front, 245/35 square. Works great, zero rubbing.

This looks great. Can’t tell from the angle, is it stock suspension?

[SkyeC]

Yeah, stock adaptive suspension.

I’ve dropped it off today for an alignment and have Millway camber plates installed.

In the future I’d like to get Ohlins. Have had coilovers or springs on cars in the past and want to keep it relatively comfortable for now.

[Devil doc]

Originally Posted by SkyeC

Yeah, stock adaptive suspension.

I’ve dropped it off today for an alignment and have Millway camber plates installed.

In the future I’d like to get Ohlins. Have had coilovers or springs on cars in the past and want to keep it relatively comfortable for now.

Can you please give us your impressions on the Millway camber plates? , also which version did you get ? Thanks

[SerenVoX]

Originally Posted by 4Hockey4

I would go BBS, as it seems only a few flow form have the strength, Apex seems decent, but only 8.5"

So few choices at 18x8 - thx Merlin, seems the Oz doesnt use a full flow form process, seems to be some issues with strength - street probably just fine like yours, but light track wouldn't be good IMO.

BBS (Flow Form) - I'd just step up and get custom BC Forged for $3,100 at that point !

I want the Titan-7 T-S5, but not available for FXX. Great forged wheel for $500. (most BMW configs)
https://titan-7.com/products/t-s5-fo...=8208442687576

Was looing at all the sizes they have for those Titan-7 T-S5.. Would the "BMW E8X 1SERIES 04-11: SIZE F:18X8.5 +44 R: 18X8.5 +44 non staggered setup work for our 2 series? ex. F22

[4Hockey4]

Originally Posted by SerenVoX

Was looing at all the sizes they have for those Titan-7 T-S5.. Would the "BMW E8X 1SERIES 04-11: SIZE F:18X8.5 +44 R: 18X8.5 +44 non staggered setup work for our 2 series? ex. F22

Friend rec'd Titan-7 forged, but emailed them and have nada that will fit F22. If you want forged and solid deal, get the APEX 7 or 8 in group buy for $475/each.

https://www.gangup.com/apex/apex-18-...w-q2-2020.html

Here's Titan response:

Thank you for reaching out

At the moment, we are still a new company and are slowly expanding out our applications.

We only have M models @ the moment but will be looking to expand out in due time

Thank you for your consideration and patience

[Devil doc]

Originally Posted by SerenVoX

Was looing at all the sizes they have for those Titan-7 T-S5.. Would the "BMW E8X 1SERIES 04-11: SIZE F:18X8.5 +44 R: 18X8.5 +44 non staggered setup work for our 2 series? ex. F22

I was wondering the same thing. The specs for the 1 series 18x8.5s Et44 are fairly similar to what we can run in the 2 series.

*As I was typing this, Titan answered me and told me they do fit; so I placed an order on the spot, hopefully I’ll have them in a few days. I was also waiting for the apex group buy to close*

[4Hockey4]

Originally Posted by Devil doc

I was wondering the same thing. The specs for the 1 series 18x8.5s Et44 are fairly similar to what we can run in the 2 series.

*As I was typing this, Titan answered me and told me they do fit; so I placed an order on the spot, hopefully I’ll have them in a few days. I was also waiting for the apex group buy to close*

shit really ? They told me M series only. Do you have contact/email there ?


I emailed them back too, you going black or titanium and what color is your car ?

[SerenVoX]

Originally Posted by Devil doc

I was wondering the same thing. The specs for the 1 series 18x8.5s Et44 are fairly similar to what we can run in the 2 series.

*As I was typing this, Titan answered me and told me they do fit; so I placed an order on the spot, hopefully I’ll have them in a few days. I was also waiting for the apex group buy to close*

Hell yea, thats what im talking about!

Originally Posted by 4Hockey4

shit really ? They told me M series only. Do you have contact/email there ?


I emailed them back too, you going black or titanium and what color is your car ?

Looks like black might be sold out atm... Im going titanium tho anyways. Hopefully they have 3 sets for us all

[4Hockey4]

I was leaning Titanium (have MG) but need to figure out spacing etc. Love the wheel, worried I'd get an have to drop in Camber plates etc. I can order 5mm ECS spacers, worried it won't clear strut.

annnnddd they are out of stock for those.

[Devil doc]

Originally Posted by SerenVoX

Hell yea, thats what im talking about!





Looks like black might be sold out atm... Im going titanium tho anyways. Hopefully they have 3 sets for us all

My car is a mineral gray, so I ordered the last set Left in black 😂, that’s the reason I placed the ordered as soon as I was able to confirm with them.

[SerenVoX]

Originally Posted by 4Hockey4

I was leaning Titanium (have MG) but need to figure out spacing etc. Love the wheel, worried I'd get an have to drop in Camber plates etc. I can order 5mm ECS spacers, worried it won't clear strut.

annnnddd they are out of stock for those.

Shit, I think I bought the last one in Titanium. They have a stockist of shops listed by states on their website. Maybe they have these in stock at another store? Can they make them to order if you contact them?

Originally Posted by Devil doc

My car is a mineral gray, so I ordered the last set Left in black 😂, that’s the reason I placed the ordered as soon as I was able to confirm with them.

Very nice, they must have had one set in black they could confirm cause their website said sold out when I was looking at them yesterday. I have an Alpine White M235xi, titanium should be nice.

[SerenVoX]

Originally Posted by 4Hockey4

I was leaning Titanium (have MG) but need to figure out spacing etc. Love the wheel, worried I'd get an have to drop in Camber plates etc. I can order 5mm ECS spacers, worried it won't clear strut.

Why would you need to drop in camber plates etc? You have an M235i? I imagine these wheels at et44 and 8.5 will be a really good fit? Can even lower car and not rub I believe.. I will be pairing these wheels with some progressive springs from MSS.

[4Hockey4]

Originally Posted by SerenVoX

Why would you need to drop in camber plates etc? You have an M235i? I imagine these wheels at et44 and 8.5 will be a really good fit? Can even lower car and not rub I believe.. I will be pairing these wheels with some progressive springs from MSS.

may need 3mm or 5mm spacer up front depending on strut etc.

I can order but it'll be 60-90 days.

black or titanium tough call for MG....glad they fit F22 and you guys snagged. I'll call them tomorrow and see if anyone has.

How much was shipping ?

thx !!

[Devil doc]

Originally Posted by SerenVoX

Shit, I think I bought the last one in Titanium. They have a stockist of shops listed by states on their website. Maybe they have these in stock at another store? Can they make them to order if you contact them?


Very nice, they must have had one set in black they could confirm cause their website said sold out when I was looking at them yesterday. I have an Alpine White M235xi, titanium should be nice.

I checked earlier today and the website said they were out of stock (Black version) so I contacted Titan through Instagram and they told they had 1 set left. he sent me the Direct link again and that’s when I placed the order immediately.

I think titanium should look really nice in white, At least that’s what I would get ��

[Devil doc]

Originally Posted by 4Hockey4

may need 3mm or 5mm spacer up front depending on strut etc.

I can order but it'll be 60-90 days.

black or titanium tough call for MG....glad they fit F22 and you guys snagged. I'll call them tomorrow and see if anyone has.

How much was shipping ?

thx !!

Im sure at least one of Vendors should have a set in stock at any given time. I think shipping was 95$

[4Hockey4]

Originally Posted by Devil doc

Im sure at least one of Vendors should have at least one set of their wheels in stock.

says Bimmerworld (only like 2 hours from house) but nothing online, shot them an email

Lets us know how they fit...pics etc !

[4Hockey4]

Ok just talked to James (he answered the phone lol) and he said that was originally designed for the Civic Type R, and modified for 1 series but folks have run on 2 series.

They have zero left across country, the online inventory is for all Stockist. 60-90 days to make, flat $95 shipping fee.

and you guys ordered online with this config: BMW E8X 1SERIES 04-11: SIZE F ? below order:

[SerenVoX]

Originally Posted by 4Hockey4

Ok just talked to James (he answered the phone lol) and he said that was originally designed for the Civic Type R, and modified for 1 series but folks have run on 2 series.

They have zero left across country, the online inventory is for all Stockist. 60-90 days to make, flat $95 shipping fee.

and you guys ordered online with this config: BMW E8X 1SERIES 04-11: SIZE F ? below order:

Wow, that's quite a long time to make..

Yes, that is the one I ordered. $95 for shipping. Total cost with tax $2300.46.

Its nice to know that some have used them on the 2er. Wish we could see some photos of those, once I have them Ill def release photos

[4Hockey4]

Originally Posted by SerenVoX

Wow, that's quite a long time to make..

Yes, that is the one I ordered. $95 for shipping. Total cost with tax $2300.46.

Its nice to know that some have used them on the 2er. Wish we could see some photos of those, once I have them Ill def release photos

Like I said, Owner answered phone on a Sunday afternoon (thought I'd get office) walked me through everything.

May wait and see how your's and Doc's fit !! Wonder if Xdrive fit up front would be different from RWD ? Spacers etc if necc. Looking forward to pics