[255zr]

Nice looking seats, can't wait to see the rest of the mods!! Can you post the offset on your 19" wheels? Seems to be difficult to find wheels that will fit the M235i. Thanks.

[AnooooOH]

Originally Posted by 255zr

Nice looking seats, can't wait to see the rest of the mods!! Can you post the offset on your 19" wheels? Seems to be difficult to find wheels that will fit the M235i. Thanks.

thank you!

offsets are 40f und 50r. Should work fine!

[vladberca]

Great choice for the seats! Keep up the good work

[AnooooOH]

Thank you!! I`ll try my best!!

[ir_fuel]

Nice car! Had the same seats in the Megane RS.

Can you tell me what they cost in Germany? (You can send me a PM for that).

Thanks!

[AnooooOH]

I got them as a sample piece from manhart performance, so I got another price,
but they are > 3000€ when you get them new with these options.
they def cost more than the e-series bmw performance seats.

[ir_fuel]

Ok thanks.

I can get the BMW ones for a reasonable price. Are they a straight fit you think, since the seat is basically the same. What about the airbag connectors for instance?

[AnooooOH]

the connectors are different but you can get a kit to adapt them, or you can customize them.

the airbags need to be coded.
I don`t know the english term for "sitzbelegungsmatte" but you need to get the passenger side airbags coded to explode in case of an accident, because the recaros can`t tell if you got a passenger next to you.

[ir_fuel]

And at Manhart they know how to code the airbags?

[AnooooOH]

yes of course! they did it on my 135 and they`ll do it on friday on my 235!

[M.barnes]

sitzbelegungsmatte is the seat occupancy sensor basically.

[AnooooOH]

sound resonable! Thank you!

[DRVNM3]

Very very nice!

[Joseph@x-ph.com]

[AnooooOH]

thank you!

the ride got its wheels, exhaust, grilles and suspension yesterday, won its first trophy today at a meet with 570 bmws (it was a hard competition in the 2 series segment lol), I got many pics and tomorrow I`ll take some pics of the interior with my dslr and then i`ll start a build-thread!

[Greenkirby21]

Originally Posted by AnooooOH

thank you!

the ride got its wheels, exhaust, grilles and suspension yesterday, won its first trophy today at a meet with 570 bmws (it was a hard competition in the 2 series segment lol), I got many pics and tomorrow I`ll take some pics of the interior with my dslr and then i`ll start a build-thread!

YES PLEASEEeEEEEEEEE

[M.barnes]

Can't wait!!

[AnooooOH]

haha

[Flyboyflash]

Great seats! What did you do with your M235i OEM seats? I'm looking for a pair of front seats. Tks, Flyboyflash.

[Silvermike]

I wish I could find a pair of these....

[Flyboyflash]

Nice job on your sport seats. You may be the one who understands my issue and can provide guidance.

I upgraded my 228i mechanical seats (heated) to electric seats (memory w/o lumbar) from a 220d. Now, I must align the wiring/pins of the male f connector (in vehicle) to the wiring/pins of the female f connector (under seats).

Do you know where I can find a visual that identifies the wiring/pins of each, so I can re-key/re-align the male wiring/pins with the female f connector wiring/pins.

Thanks,
Flyboyflash

[Has335d]

Originally Posted by AnooooOH

Two days ago I got my aw M235i and all I have to say is... I love this car!

Here is a teaser pic of the first mod:



These are Recaro Sportster CS bought at Manhart Performance.
Black leather with airbags and of course they are heated seats.

In 7 days the car will be at Manhart for the next round of mods.
It gets staggered 19" Manhart wheels with 225/255 Michelin PSS tires, KW V3 and the BMW M Performance exhaust with 90mm Manhart tips and black oem grills.

Of course I`ll take some pics then!

Hi Mate

I really like the seats. I have a set of my own but, require the right rails. Can you please point me in the right direction on where to get the rails/sliders/frame from?