[VECT0R]

Is it too late to get in on the most recent group buy?

[K8_M235i]

Originally Posted by VECT0R

Is it too late to get in on the most recent group buy?

Nope! You can pm me your email and phone number and f2x type

[k3yboardninja]

Originally Posted by K8_M235i

Nope! You can pm me your email and phone number and f2x type

Has the email gone out yet with further instructions? Just don't want to miss it. I get way too much email.

[K8_M235i]

Originally Posted by k3yboardninja

Has the email gone out yet with further instructions? Just don't want to miss it. I get way too much email.

No, I will let everyone on here know when I send it out. The email will basically be a special link to Rogues site to purchase the shifter (it will be like buying anything else from their website).

To echo my comment above, Rogue is waiting on a piece used in their shifter kits from their machine shop. They can't produce the kits until these pieces arrive, so they are waiting to have them before taking any orders.

[sekhon]

From what I gathered, Sportstick is currently the only one with this shifter in a 228i/230i ?

Would it be possible to get this in my new to me MY 2020 230i?

[Sportstick]

Originally Posted by sekhon

From what I gathered, Sportstick is currently the only one with this shifter in a 228i/230i ?

Would it be possible to get this in my new to me MY 2020 230i?

Absolutely, unequivocally impossible!


JK…if you can, don’t think twice. Do it!!

And then, replace the trans fluid with Redline DCTF

Feels like a different car!

[sekhon]

How long do I have to sign up K8_M235i ? Is international shipping a go?

I just joined the forums, as I just purchased my first BMW, so I don't believe I can PM you quite yet. If I missed out on time, then it just wasn't meant to be!

I suppose the next concern I have is installation ; I promised myself that I would try to work on my BMW as much as I possibly could. I have little to no experience in this area; I am guessing this might be a bad place to start... so I'll have to shop around a bit and ask for quotes I suppose... I am quite busy atm, so I am almost just wondering if I should just send in an order without confirming if a shop can do this, since it seems that everyone else in the past had enough success with getting it installed!

First manual car, and I have only been driving it for 1 week and I am already looking to replace the shifter... and come to think of it, I was already looking at messing around with the clutch stop!

EDIT: I will remember to change in Redline DCTF as well, even if I don't get in or go with the Rogue Shifter.

[K8_M235i]

Originally Posted by sekhon

How long do I have to sign up K8_M235i ? Is international shipping a go?

I just joined the forums, as I just purchased my first BMW, so I don't believe I can PM you quite yet. If I missed out on time, then it just wasn't meant to be!

I suppose the next concern I have is installation ; I promised myself that I would try to work on my BMW as much as I possibly could. I have little to no experience in this area; I am guessing this might be a bad place to start... so I'll have to shop around a bit and ask for quotes I suppose... I am quite busy atm, so I am almost just wondering if I should just send in an order without confirming if a shop can do this, since it seems that everyone else in the past had enough success with getting it installed!

First manual car, and I have only been driving it for 1 week and I am already looking to replace the shifter... and come to think of it, I was already looking at messing around with the clutch stop!

Welcome to the forum! Where are you located? Canada is okay, they just don't want to ship overseas right now.

If you have a good independent Euro shop that knows their way around bmws this would be easy for them. 1-2 hours, 3 max if they're slow.

[sekhon]

Originally Posted by K8_M235i

Welcome to the forum! Where are you located? Canada is okay, they just don't want to ship overseas right now.

If you have a good independent Euro shop that knows their way around bmws this would be easy for them. 1-2 hours, 3 max if they're slow.

I live very close to the Washington State border! (Essentially Vancouver, BC)

If COVID restrictions weren't an issue, I could have this thing shipped to my US box... come to think of it, I can still have it shipped there and pick it up whenever restrictions lift!

I think with the extra duty fees that I would have to pay to have it shipped to me, rather than just declaring it as I drive back, that I might just have it shipped to my American box.

What is the cost and what information of mine do you need?

[K8_M235i]

Originally Posted by sekhon

I live very close to the Washington State border! (Essentially Vancouver, BC)

If COVID restrictions weren't an issue, I could have this thing shipped to my US box... come to think of it, I can still have it shipped there and pick it up whenever restrictions lift!

I think with the extra duty fees that I would have to pay to have it shipped to me, rather than just declaring it as I drive back, that I might just have it shipped to my American box.

What is the cost and what information of mine do you need?

Shipping would also be less if shipped to the US. Cost should be the same as the first time ($395), but I have to double check. I have you on the list.

[K8_M235i]

This is the list I have right now. Not all are confirmed, so don't feel pressured if you see your name, but aren't totally sure yet. If you want one and don't see your name, please reach out. I'm pretty sure I have everyone between my emails and Pm's.

hoshwazy
vballer
WAFU7
Droptopbeemer
tcollier91
DILONIKA
againsttherage
Wheelwright
sauceonside
k3yboardninja
@EE60
freakystyly
VECT0R
sekhon
deathking
GeneralM240
Tomskeed

[Sportstick]

Originally Posted by K8_M235i

This is the list I have right now. Not all are confirmed, so don't feel pressured if you see your name, but aren't totally sure yet.

If anyone isn't sure yet, there is only one thing they need to do for themselves!

Become sure NOW!

[sekhon]

Incoming ;

Sportstick

How do you like the M2 LSD?

Did you ever make a post that talks about the process and rough cost?

I would be curious to know more about it.

[Sportstick]

Originally Posted by sekhon

Incoming ;

Sportstick

How do you like the M2 LSD?

Did you ever make a post that talks about the process and rough cost?

I would be curious to know more about it.

PM sent

[PRoberts22]

Is this a one time deal or will it be available in the future?

[K8_M235i]

Originally Posted by PRoberts22

Is this a one time deal or will it be available in the future?

They are only available if we get enough people to sign up for a production. If it does happen again it won't be anytime soon.

[Sportstick]

Originally Posted by PRoberts22

Is this a one time deal or will it be available in the future?

Who knows...

[DILONIKA]

hey y'all jest responded to the PMs, I'm down to buy one and hope I'm not too late.

[K8_M235i]

Originally Posted by DILONIKA

hey y'all jest responded to the PMs, I'm down to buy one and hope I'm not too late.

Nope you're still good!

[K8_M235i]

Great news everyone! Rogue just received the final pieces they needed from the machine shop and they are ready to start manufacturing the kits. I will have an email going out within the next few days with a link to order!

[hoshwazy]

Originally Posted by K8_M235i

Great news everyone! Rogue just received the final pieces they needed from the machine shop and they are ready to start manufacturing the kits. I will have an email going out within the next few days with a link to order!

Awesome! Looking forward to it! Thanks for getting this set for us K8_M235i

[blkreaper]

Originally Posted by K8_M235i

Great news everyone! Rogue just received the final pieces they needed from the machine shop and they are ready to start manufacturing the kits. I will have an email going out within the next few days with a link to order!

Can I be added to this or is it too late?