[yaboibooch]

Hi everyone,

I'm fitting 18x9.5 +45 on 255/35 square on my M240i and I'm going to be using anywhere from a 15mm to 20mm spacer for the front wheels.

So far I'm between Turner Motorsport aluminum spacers and Rogue Engineering aluminum spacers. I know these are fine wheel spacers but I'm curious if anyone here knows of any good hub-centric steel spacers made in 5x120.

Thanks!

Here's a pic of the wheels and my car.

[SkyeC]

What gave you the impression those wheels are going to fit on the front?

[TonM3]

Originally Posted by SkyeC

What gave you the impression those wheels are going to fit on the front?

Originally Posted by SkyeC

What gave you the impression those wheels are going to fit on the front?

I'm thinking hallucinogenic drugs

[yaboibooch]

Originally Posted by SkyeC

What gave you the impression those wheels are going to fit on the front?

Originally Posted by TonM3

I'm thinking hallucinogenic drugs

Hahaha yeah I was definitely off the goomies when I purchased these.

In all seriousness, these wheels fit. Need to take some photos when the tires arrive. I might have to mold the fender liner.

Front:
-18mm unknown brand aluminum spacer from friend's E92 M3
-Ohlin R&T Coilovers with shortened springs
-Fender roll, slight pull (~1/4")
-Negative 2.8* Camber, 1/16" Toe Out

Rear:
-Fender roll
-Negative 2.2* Camber, 1/8" Toe in


Back to the matter at hand, does anyone in this forum know of decent steel spacers to consider? So far I think the Turner or Rogue spacers are my best bet for aluminum.

[K8_M235i]

Originally Posted by yaboibooch

Hahaha yeah I was definitely off the goomies when I purchased these.

In all seriousness, these wheels fit. Need to take some photos when the tires arrive. I might have to mold the fender liner.

Front:
-18mm unknown brand aluminum spacer from friend's E92 M3
-Ohlin R&T Coilovers with shortened springs
-Fender roll, slight pull (~1/4")
-Negative 2.8* Camber, 1/16" Toe Out

Rear:
-Fender roll
-Negative 2.2* Camber, 1/8" Toe in


Back to the matter at hand, does anyone in this forum know of decent steel spacers to consider? So far I think the Turner or Rogue spacers are my best bet for aluminum.

Greetings from Facebook. Why would you want to go with steel spacers? All the spacers I know of are aluminum. The hats on the the oem rotors are aluminum as well. Rogue Engineering is a great company.

[KennyFSU]

Aluminum does the job fine and it's lighter.

[BEM-S4]

Originally Posted by KennyFSU

Aluminum does the job fine and it's lighter.

Long story but I actually tried to find a steel spacer since I wanted a heavier one and they were next to impossible to source. Bespoke was the only option I could find.

[yaboibooch]

Originally Posted by K8_M235i

Greetings from Facebook. Why would you want to go with steel spacers? All the spacers I know of are aluminum. The hats on the the oem rotors are aluminum as well. Rogue Engineering is a great company.

Did not know the hats were aluminum, if that's the case I'll purchase some aluminum spacers.

Originally Posted by BEM-S4

Long story but I actually tried to find a steel spacer since I wanted a heavier one and they were next to impossible to source. Bespoke was the only option I could find.

I ended up finding a few companies that makes custom steel spacers that come in around the same price as a pair Rogue Engineering aluminum spacers.


Thanks for the help everyone who helped. All you other boomers who can't wrap your heads around fitments not cataloged by Apex go kick rocks.