01-21-2022, 03:49 PM | #1 |
New Member
3
Rep 15
Posts |
Launch control issues
so randomly my m240i xdrive started having issues with launch control. when i initiate it, it says launch control active. it seems like it wants to engage launch but then it starts building more revs and spins the tires without me removing my foot from the brake. Also it gave me a chassis stabilization error i went home checked tpu and ecu codes and nothing came up. Any ideas?
|
01-30-2022, 10:12 AM | #2 | |
Private
23
Rep 87
Posts |
Quote:
So I believe that normally happens when you hold the Launch for more than I think its 3 seconds, It'll start revving past what it was launching it, and if you keep holding it'll spin, this happened to me when I went PS2 on my 335i, just let go of the brake right before you feel to slip or starts revving up again. If I'm wrong someone feel free to correct me , thanks. |
|
Appreciate
0
|
02-01-2022, 07:10 AM | #3 | ||
New Member
3
Rep 15
Posts |
Quote:
|
||
Appreciate
0
|
02-01-2022, 06:39 PM | #4 |
Private
23
Rep 87
Posts |
That has happened to me as well, I couldn't hold LC, it kept slipping up while holding the brake as hard as I could and once i changed my brakes, my car was solid on LC and was able to hold till it started revving high. even when my brake pads got less than 50% wear, I noticed slight slipping.
|
Appreciate
0
|
02-01-2022, 06:41 PM | #5 | |
New Member
3
Rep 15
Posts |
Quote:
|
|
Appreciate
0
|
11-07-2022, 05:46 AM | #6 |
New Member
8
Rep 13
Posts |
So, did you get it solved ?
I am having exact same issue (including chassis stabilization error) and I am leaning towards my brakes as well... Another thing that I have noticed is sometimes when you release your brake and let the car launch (it will still spin too much and bring that error as well). To me it seems that t-case is too late to react and it will always spin rears more or less... |
Appreciate
0
|
11-11-2022, 12:45 PM | #7 | |
New Member
3
Rep 15
Posts |
Quote:
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|