Burning Smell & Fluid

thurston · 02-03-2023, 01:56 PM

Just discovered this the other day. There's a bit of fluid/grease coming from this area and it's smoking and has a burning smell. Anyone had this happen or have any ideas what could be going on?

Just thought I'd reach out here before taking it into service. I'm not so mechanically inclined, but I will investigate it further in daylight when I have more time.

overcoil · 02-03-2023, 02:31 PM

is it this

thurston · 02-04-2023, 05:38 AM

Yeah, looks just like that. Serious issue that needs to be addressed immediately?

Quote:

Originally Posted by Caravaggio

is it this

overcoil · 02-04-2023, 05:46 AM

I took care of it right away if I recall correctly the fumes were wafting into the cabin.

Mechanically I do not think it is an issue that will cause imminent catastrophic breakage.

There are some other post on this forum about this valve cover gasket leak since it's a common issue.

thurston · 02-04-2023, 05:55 AM

Okay appreciate the advice. And that's how I noticed it too, with the fumes coming into the cabin.

Quote:

Originally Posted by Caravaggio

I took care of it right away if I recall correctly the fumes were wafting into the cabin.

Mechanically I do not think it is an issue that will cause imminent catastrophic breakage.

There are some other post on this forum about this valve cover gasket leak since it's a common issue.

thurston · 02-22-2023, 09:05 AM

Update on this. Valve cover leaking and needs to be replaced. 1200€ including labor from BMW in Germany.

overcoil · 02-22-2023, 09:19 AM

Quote:

Originally Posted by thurston

Update on this. Valve cover leaking and needs to be replaced. 1200€ including labor from BMW in Germany.

that seems near what I paid in the U.S at BMW dealership.

WolfGTI · 02-27-2023, 09:15 AM

These modern valve covers are expensive and a fair bit of work to remove and replace. Long gone are the days when a rachet and socket were all you needed to change a valve cover in abut 10 minutes.

123Britt · 02-27-2023, 11:41 AM

Aftermarket or OE?

02-03-2023, 01:56 PM	#1
thurston Lieutenant 215 Rep 565 Posts Drives: 2016 M235i Join Date: Jan 2011 Location: Wiesbaden iTrader: (0)	Burning Smell & Fluid Just discovered this the other day. There's a bit of fluid/grease coming from this area and it's smoking and has a burning smell. Anyone had this happen or have any ideas what could be going on? Just thought I'd reach out here before taking it into service. I'm not so mechanically inclined, but I will investigate it further in daylight when I have more time. Attached Images __________________ Designer & Photographer
	Appreciate 0 Tweet Quote

02-03-2023, 02:31 PM	#2
overcoil Major General 3073 Rep 5,577 Posts Drives: M235i 6spd Join Date: Dec 2013 Location: Mid-Atlantic iTrader: (0)	is it this
	Appreciate 0 Quote

02-04-2023, 05:46 AM	#4
overcoil Major General 3073 Rep 5,577 Posts Drives: M235i 6spd Join Date: Dec 2013 Location: Mid-Atlantic iTrader: (0)	I took care of it right away if I recall correctly the fumes were wafting into the cabin. Mechanically I do not think it is an issue that will cause imminent catastrophic breakage. There are some other post on this forum about this valve cover gasket leak since it's a common issue.
	Appreciate 0 Quote

02-22-2023, 09:05 AM	#6
thurston Lieutenant 215 Rep 565 Posts Drives: 2016 M235i Join Date: Jan 2011 Location: Wiesbaden iTrader: (0)	Update on this. Valve cover leaking and needs to be replaced. 1200€ including labor from BMW in Germany. __________________ Designer & Photographer
	Appreciate 0 Quote

02-27-2023, 09:15 AM	#8
WolfGTI Captain 716 Rep 912 Posts Drives: '17 F22,15 E84 M Sport,02 R53 Join Date: Jul 2007 Location: South NJ iTrader: (0) Garage List 2017 BMW M240i [0.00] 2002 MINI Cooper S [0.00] 2015 BMW X1 [0.00]	These modern valve covers are expensive and a fair bit of work to remove and replace. Long gone are the days when a rachet and socket were all you needed to change a valve cover in abut 10 minutes. __________________ Integrated Engineering engine mounts, Dinan CAI, AA catted DP, Remus resonated cat back. Rogue Engineering SSK & transmission mounts, WaveTrac LSD. Ohlins R&T coilovers, Turner monoball thrust arms, F87 LCAs, GC camber plates, Superpro subframe bushings, Megan Racing adj. RCAs, delrin differential bushings. Stoptech BBK 6 piston (f) 4 piston (r).
	Appreciate 0 Quote

02-27-2023, 11:41 AM	#9
123Britt Captain 287 Rep 864 Posts Drives: 15 M235i AT Join Date: May 2008 Location: Madison, Alabama iTrader: (0)	Which VC ? Aftermarket or OE?
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search