THE LARGEST BMW 2-SERIES FORUM ON THE PLANET
| Discrepency Between Boost Target and Max Boost Limiter (PSI) |
Post Reply |
|
|
Thread Tools | Search this Thread |
| 08-10-2023, 05:12 PM | #1 |
|
Enlisted Member
 
16
Rep 32
Posts |
Discrepency Between Boost Target and Max Boost Limiter (PSI)
I'm dealing with Boost Target being way off from Boost Ceiling, and I wanted to lower the boost to 1750 HPA ( or 25 PSI), but when I load the map I get limited boost and I noticed the "Max Boost Limiter (PSI)" (under map config) is way lower than what I set the max to be in the table.
Am I missing something here? My idea is that it is because of the ambient pressure/ my measurements being in RELATIVE + IMPERIAL. Here are images for reference: https://ibb.co/TTrFsWK https://ibb.co/gdjBNXp https://ibb.co/Kmrr6Cy |
Post Reply |
| Bookmarks |
|
|
