[jzeiler4]

I believe it is one of those safety nannies that cannot be disabled.

[TrboMike]

Originally Posted by prooton

Exactly, sometimes I need to lock when engine runs (either to heat or cool). And then the horn honks. Just want to disable that.

In the FEM module:
CLM_HORN_AT_SECURE and toggle to nicht_activ

Or if you have Bimmercode:

[prooton]

Super! Great thanks TrboMike!
I need to get my e-sys cable (ordered few days ago) and then to disable that will be my first task...

[brakthru]

Hi,
I have a M240i and want to code DSC module.
Anyone know what functions to code out traction control nannies? I'm familiar with coding e90 dsc but not familiar with German esys language. I have Bimmergeeks Protool which has full esys features now. I'm looking to code corner brake pressure, ediff, brake disc overheating etc. Features that may reduce power or have too much brake pressure interference. This may be called something different in F series ecu.

[Jamesjedi]

EDC delete :

Will this work on the M235i?

https://f80.bimmerpost.com/forums/sh...342&page=3


Looking for a good step by step.

Hopefully hopefully someone can provide some good information. Cheers!

[34yof99]

Hi,
I have a 220D and i have some problem on FEM_BODY module.
The problem is cafd_00000794_018_070_005 not found.
Can you please help me ?

[shawnsheridan]

Originally Posted by 34yof99

Hi,
I have a 220D and i have some problem on FEM_BODY module.
The problem is cafd_00000794_018_070_005 not found.
Can you please help me ?

You need to update (Delete & Replace) your PSdZData.

Your Receive PM function is disabled. PM me when working.

[34yof99]

Idk why my pm function is disabled. Im new member of this forum. How can i active this function ?

[shawnsheridan]

Originally Posted by 34yof99

Idk why my pm function is disabled. Im new member of this forum. How can i active this function ?

Requirement is:

"In order to use the PM system and be a full fledged member of this community, you will have to make 4 post replies and wait 1 hour for your account to be upgraded."

[34yof99]

Oh thanks. Im gonna send pm you soon.

[HootisTigglebits]

I have a 2016 M235i and was wondering how I can retrofit apps (such as Amazon music and Spotify) to the connected drive system? Bimmertech offers this service but I'd rather do it myself.

[HootisTigglebits]

When I go to code a cafd file I get No EST file chosen. [C155], How can i fix this?

[shawnsheridan]

Originally Posted by HootisTigglebits

When I go to code a cafd file I get No EST file chosen. [C155], How can i fix this?

Use E-Sys Launcher:

From TokenMaster's Blog:

UPDATE: 06/20/2020 - Uninstall the old version, download and reinstall the new, repackaged version and the updated BFU_XODE.EST
Posted by TokenMaster at 6:16 PM

Links are there:

http://tokenmaster.blogspot.com/2019...r-pro-282.html

[haggag]

Hello all,
I'm trying to use esys to activate enchanted Bluetooth so I can see playlists and album art and I'm honestly lost in all this, I'm not sure which version of esys to download, what token to use, and do I need a launcher? it just seems overly complicated for me. can someone please help with letting me know exactly what I need? My car is an f22 built 6-2014 and planning to use my laptop with windows 7. please any help would be highly appreciated

[boweld11]

Hello, this is my first post on a foreign forum and I am asking for mercy . Soon I will be converting the BMW F23 235i from the USA version to Europe (Poland). I more or less know how to go about it in Esys, but I have a few questions. 1. I don't know what the "Typschlussel" value is about. Are there always the same values ​​for each F-series model from the USA and do you switch to the same European ones?

[Yabbadabadooh]

Hi everyone. Not sure if this has been asked before. I'm sorry if I'm reviving something that was already covered. I was just wondering if in Bimmercode expert mode can i code in headunit maximum volume at startup beyond 50% which i currently coded in? Many thanks in advance 👍

[TrboMike]

bump because I keep looking for this thread and it should be sticky

[Roadfeel]

ZL was replaced in my 2015 BMW M235xi, but the paddle shifter, horn, and steering wheel heater are not working. Is it possible to code in the SZL using expert mode in FEM? I believe the necessary adjustments are in 3140 PfLinSteeringWheel - LIN_VARIANTE_SZL. Please assist me with this.

Please keep in mind that the replacement SZL is not brand new. I bought it on eBay.

[doughboy]

Originally Posted by Roadfeel

ZL was replaced in my 2015 BMW M235xi, but the paddle shifter, horn, and steering wheel heater are not working. Is it possible to code in the SZL using expert mode in FEM? I believe the necessary adjustments are in 3140 PfLinSteeringWheel - LIN_VARIANTE_SZL. Please assist me with this.

Please keep in mind that the replacement SZL is not brand new. I bought it on eBay.

I used esys to program my szl, not sure if you can do it in bimmercode, maybe.

But yes the Lin variante options are to setup the devices on the lin bus network.

Also Lin variante LRE and MFL maybe relevant.

I recall LRE for heating and vibration, but its a few years ago now.

Is your, new szl the exact same as the old one?

[Roadfeel]

Yes, the SZL is same. When I contacted Bimmercode support, they informed it wasn't possible. I am new to coding. Could you let me know how to obtain esys? TIA

[shawnsheridan]

Originally Posted by Roadfeel

Yes, the SZL is same. When I contacted Bimmercode support, they informed it wasn't possible. I am new to coding. Could you let me know how to obtain esys? TIA

PM sent.

[doughboy]

Originally Posted by Roadfeel

Yes, the SZL is same. When I contacted Bimmercode support, they informed it wasn't possible. I am new to coding. Could you let me know how to obtain esys? TIA

Have you looked at Bimmergeeks ProTool app?

It's much more advanced than Bimmercode, but still easy to use. I've only read reviews not used it but maybe worth contacting them?

Esys is a poweful tool, but tricky to install and use, all in german, and you can mess things up if you're not careful.