03-26-2020, 08:23 AM | #1 |
New Member
7
Rep 29
Posts |
LED Fog Lights Flicker when Not On?
Swapped out some bulbs for LEDs and noticed that the LED fog lights slightly flicker when the car is running even if they're not switched on. Otherwise they work just fine when they're actually supposed to be on.
I've switched everything in BimmerCode to LED where applicable, as well as disabled both warm & cold monitoring. Logic would say that if the bulb is flickering, the car is doing something to make it happen, so I'd have to assume the bulb is fine, and it's a setting I've missed. But where? Anyone else familiar with this particular odd behavior? |
03-28-2020, 03:58 PM | #2 |
Second Lieutenant
118
Rep 208
Posts |
Mine were flickering before I coded them with E-sys. Not sure whet you need to do in BimmerCode though.
In E-sys you need to do the following: Right projector: Code:
FEM_BODY > 3061 > NSW_R_KALTUEBERWACHUNG > nicht_aktiv FEM_BODY > 3061 > NSW_R_WARMUEBERWACHUNG > nicht_aktiv FEM_BODY > 3061 > NSW_R_IS_LED > aktiv FEM_BODY > 3061 > NSW_R_UE_SPG_SCHUTZ > nicht_aktiv FEM_BODY > 3062 > MAPPING_ABBIEGEL_R_PWM_LEVEL_1 > 100% FEM_BODY > 3063 > MAPPING_NEBELSCHW_R_PWM_LEVEL_1 > 100% Left projector: Code:
FEM_BODY > 3061 > NSW_L_KALTUEBERWACHUNG > nicht_aktiv FEM_BODY > 3061 > NSW_L_WARMUEBERWACHUNG > nicht_aktiv FEM_BODY > 3061 > NSW_L_IS_LED > aktiv FEM_BODY > 3061 > NSW_L_UE_SPG_SCHUTZ > nicht_aktiv FEM_BODY > 3062 > MAPPING_ABBIEGEL_L_PWM_LEVEL_1 > 100% FEM_BODY > 3063 > MAPPING_NEBELSCHW_L_PWM_LEVEL_1 > 100%
__________________
Quaife LSD | BC Racing Coilovers | H&R ARB | F8x LCA+TS | Wiechers Strutbar | Mishimoto CAI | Mishimoto Oil Cooler | Mishimoto Oil Catch Can | Mishimoto FMIC | VRSF DP | Masata TIC | Masata CP | DV+ | Custom Kline Exhaust | GTS Style Roll Cage | Sparco Evo QRT | Brey-Krause seat mounts | Schroth Profi 2 ASM 6p | 10" Android HU| xHP Stage3 | BM3 | RaceCapture Data Logger
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|