[Michall]

Originally Posted by Drpoomanchu

I dont have any intentions of painting these parts. I will leave them in their current state.. I would gladly post pics ater install

I'm waiting patiently.

[MASHCT]

+1 + Infinity

Originally Posted by Drpoomanchu

Rear diffuser $360 and blades were $105 a piece so $210... Just recvd mine today took 2 days... Very quick and Brian is a class act..!

[MASHCT]

The offsets are 35mm for all of the wheels & they're 18x8". They do not poke at all, no matter what else you might read about 18x8" & 35mm offsets. The rears push out about an extra 1/2"; they're just shy of the wheel well edge.

Yes, the OEM center caps do fit perfectly. But they wheels come with a plain black center cap. If you buy a 62-65mm BMW emblem and double-sided sticky tape, you can have a second set of BMW emblem center-caps.

The fronts push out a little farther, but are still tucked slightly inside the wheel well edge.

Since both wheels push out a little farther, the "wheel gap" also appears shorter. An added benefit if you want to lessen that gap but you're concerned about lowering the car.

And there is no rub. I sent you a PM on price & e-tailer.

Jim

Originally Posted by leeadam

Different subject sorry, i would like to get a set of our alloys. what were offset, wonder if i can get in uk. Did the original bmw centre caps fit and the tyre valve sensors.

[OpenAir]

Originally Posted by MASH65

Here are pics of ones I had custom painted & installed myself. I will tell you this - they gather road dirt after riding around on wet roads. Put a couple of coats of good wax on them.

Pull the trigger - you'll be happy you did. These things add a great visual touch, for sure.

Just gotta say, that is a sharp looking ride!

[leeadam]

my blades on too now...

[blackm240i]

Originally Posted by Joaco135

Got a new set of side skirts blades (splitters) and since I trew the boxes away, can't tell which is left or right. Already looked for part # on the splitters but it has none on either blades, Need help

Just did the same thing and threw the boxes away.....



One end of the side blade has a second piece of 3m about 2 inches long, does that go at the front or the rear of the car?

[Joaco135]

Originally Posted by blackm240i

Just did the same thing and threw the boxes away.....



One end of the side blade has a second piece of 3m about 2 inches long, does that go at the front or the rear of the car?

Look at post #6 on this thread, that was what I used to get them right. I can't remmember if the extra 3m tape goes towards the front or back, after all it has been 4 years since got them installed, lol.

[blackm240i]

I sorted it, thanks Joaco for the response, for those with the same issue in the future....

There is actually a LH (left hand) and RH (right hand) printed on each blade which tells you which is which.