[Shinigami67]

19x8.5 ET35 - 19x8.5 ET39(Machined) - 19x9.5 ET40 - 19x9.5 ET44(Machined)

Price Please shipped to Oakville Ontario. L6M4X5

GOOOOOOOO RAPTORS!!!!!!

[OregonDude]

Hello OEMconcept,
Please PM me with pricing on the following shipped to 97124.

2x 19x8.5 ET39
2x 19x9.5 ET44

Also let me know suggested non-aggressive tire sizes for the above which guarantee no rubbing on a 2016 M235i.

Thanks!

[Si-M240i]

Originally Posted by PeterWT

Well, I finally put mine on the car.
4x (front & rear) 18x8.5 ET38.
Michelin PS A/S 3+, 235/40 front & 255/35 rear.
They look great and they don't rub on normal street driving!!!
I'm very happy!

On the front, how many mm do you have clearance between the tyre and suspension strut and the wheel and suspension strut. I am getting 18" 8.5 ET40 and not sure a 235/40 will fit without rubbing

[PeterWT]

Originally Posted by Si-M240i

On the front, how many mm do you have clearance between the tyre and suspension strut and the wheel and suspension strut. I am getting 18" 8.5 ET40 and not sure a 235/40 will fit without rubbing

I no longer have those wheels. But, there was 1-2mm between the tire and the strut.
I now have 8.5 ET40 wheels with the same tires and there is ~1mm between the tire and the strut.

I did not measure between the wheel and strut. There was plenty of room.

[Si-M240i]

Originally Posted by PeterWT

I no longer have those wheels. But, there was 1-2mm between the tire and the strut.
I now have 8.5 ET40 wheels with the same tires and there is ~1mm between the tire and the strut.

Wow that's a bit too close. So guess I will have to stay 225/40 😞. Can you do me a favour and post some pictures to show how much tyre overlaps the wheel rim? A measurement too would be awesome. Also do your tyres have a rim protector?

[PeterWT]

Originally Posted by Si-M240i

Wow that's a bit too close. So guess I will have to stay 225/40 😞. Can you do me a favour and post some pictures to show how much tyre overlaps the wheel rim? A measurement too would be awesome. Also do your tyres have a rim protector?

I'm confused as to why 1-2mm between the tire and strut is too close.
There's no movement there, so as long as it's not touching it's fine.

[Si-M240i]

Originally Posted by PeterWT

I'm confused as to why 1-2mm between the tire and strut is too close.
There's no movement there, so as long as it's not touching it's fine.

I was concerned about tyre movement when cornering hard as you get some roll over. Would that 2mm be lost very easily and then rub?

[PeterWT]

Originally Posted by Si-M240i

I was concerned about tyre movement when cornering hard as you get some roll over. Would that 2mm be lost very easily and then rub?

I put about 7K miles on these tires (Michelin PS A/S 3+, 235/40) on my previous wheels and about 1K miles on my new wheels, without any issues.
I'm sure that top of the tire does flex some when cornering hard. But as long as there is clearance when the vehicle is stopped, I don't think there is going to be any issue there.

[Si-M240i]

Originally Posted by PeterWT

I put about 7K miles on these tires (Michelin PS A/S 3+, 235/40) on my previous wheels and about 1K miles on my new wheels, without any issues.
I'm sure that top of the tire does flex some when cornering hard. But as long as there is clearance when the vehicle is stopped, I don't think there is going to be any issue there.

Ok, so you have seen no evidence of rubbing on the strut in all those miles and you running a 225/40 18" tyre on an ET40 offset, so fingers crossed it should be ok. I think I will go for a tyre without a rim protector to give a little more clearance 👍

[PeterWT]

Originally Posted by Si-M240i

Ok, so you have seen no evidence of rubbing on the strut in all those miles and you running a 225/40 18" tyre on an ET40 offset, so fingers crossed it should be ok. I think I will go for a tyre without a rim protector to give a little more clearance 👍

When I took the wheels off after the 7K miles, I did see what appeared to be a rub on the sticker on one strut, but there was no evidence of rubbing on the sidewall of either tire (235/40/18).

[Si-M240i]

Originally Posted by PeterWT

When I took the wheels off after the 7K miles, I did see what appeared to be a rub on the sticker on one strut, but there was no evidence of rubbing on the sidewall of either tire (235/40/18).

Cheers

[Medallion54]

Price + Shipping quote to 16505 Pennsylvania

19x8.5 et35 437m Two tone black silver

Thanks.

[teachasumthin3]

Hello. I need two replacement wheels for my rears. I'm looking to buy the 19x9.5 et 40s. If you don't have them in stock I'll take the 19x9.5 et39(machined). Need them shipped to Atlanta, GA 30253. Thanks!

[teachasumthin3]

Originally Posted by OEMconcept

Hey guys, I haven't been on the F22 thread in a while! I recognized some of the screen names as you've sent me PM's! For those that have not reached out, you can go ahead and send me a PM and I'll get you over some pricing!

Hello. I need two replacement wheels for my rears. I'm looking to buy the 19x9.5 et 40s. If you don't have them in stock I'll take the 19x9.5 et39(machined). Need them shipped to Atlanta, GA 30253. Thanks!

[NBS._.Mufasa]

hey im very intrested in purchasing! where or how do i go about that?

[NBS._.Mufasa]

hey i have a 2015 bmw 335i that has the 19 set on, the car was involved in an accident causing the driver front wheel to break, im looking to buy a replacment but im having trouble i hope you can help.

so the car is running the 19 19x8.5 on the front but the issuse im having is im not sure whitch of these (19x8.5 ET35 - 19x8.5 ET39(Machined)) it is.

if you could please assist me so i can buy the correct wheel!