Will 265's fit with Dinan springs?

stlb5 · 11-04-2018, 10:14 PM

Looking at a 19X9.5 ET44 wheel. Will a 265/30 MP4S tire fit and not rub?

aturk · 11-05-2018, 11:07 AM

Look at the Dinan Site, they have their Stage 3 M235i wheel/tire specs on the site. I think they fit a 265 out back.

jmwilson125 · 11-05-2018, 11:40 AM

- HRE FF15 Wheels 18x8.5ET40 & 18x9ET44 in Tarmac Black
- MPSS 235/40/18 and 265/35/18

This is my setup and it fits no problem. I think the 9.5 wouldn't be all issue either. There are a few 265 threads out there too that may specifically cover the 9.5 setup

stlb5 · 11-05-2018, 12:09 PM

Quote:

Originally Posted by jmwilson125

- HRE FF15 Wheels 18x8.5ET40 & 18x9ET44 in Tarmac Black
- MPSS 235/40/18 and 265/35/18

This is my setup and it fits no problem. I think the 9.5 wouldn't be all issue either. There are a few 265 threads out there too that may specifically cover the 9.5 setup

Most of the 265 info out there is on stock suspension.

itzzoscar · 11-28-2018, 08:59 PM

Quote:

Originally Posted by jmwilson125

- HRE FF15 Wheels 18x8.5ET40 & 18x9ET44 in Tarmac Black
- MPSS 235/40/18 and 265/35/18

This is my setup and it fits no problem. I think the 9.5 wouldn't be all issue either. There are a few 265 threads out there too that may specifically cover the 9.5 setup

I am actually looking to get the HRE FF15 wheels in the same dimensions with dinan springs. I was wondering what sizes would be ok for my xDrive M235i.

Jnat · 12-01-2018, 10:33 AM

Any pic's of 235 front and 265 rears lowered or other?

Saab Story · 12-02-2018, 10:38 AM

Quote:

Originally Posted by Jnat

Any pic's of 235 front and 265 rears lowered or other?

Here was my setup on my last car: Dinan springs with BBS CI-Rs wrapped with 235 up front & 265 in the rear. Had this setup for close to 3 years and had zero rubbing, even when on the track.

Joe240 · 12-02-2018, 10:42 AM

19x9.5et44 with 265/35. I have about 5mm of poke and stock suspension. Looks to me that I would rub if I lowered. But who knows, maybe the slight camber when lowered would allow for a narrow miss

Joe240 · 12-02-2018, 10:45 AM

Also, Dinan fit 265 in the rear using the BBS 19x9et45 (or 47? IDR exact). That’s why they were able to fit the 265 in the rear. That slight inward movement of the wheel clears the fenders

bryan_G01 · 12-02-2018, 10:47 AM

could do with apex fitments... i could easily get a 265 out back, on 255 now.

tire manufacture will be the hurdle.

Tano22 · 12-02-2018, 01:05 PM

I have the same setup as on the dinan website. Haven't had rubbing yet.

Jnat · 12-02-2018, 03:34 PM

Quote:

Originally Posted by Saab Story

Here was my setup on my last car: Dinan springs with BBS CI-Rs wrapped with 235 up front & 265 in the rear. Had this setup for close to 3 years and had zero rubbing, even when on the track.

looks great
18 or 19's ???

designatedposter · 12-02-2018, 03:58 PM

Quote:

Originally Posted by Saab Story

Quote:

Originally Posted by Jnat

Any pic's of 235 front and 265 rears lowered or other?

Here was my setup on my last car: Dinan springs with BBS CI-Rs wrapped with 235 up front & 265 in the rear. Had this setup for close to 3 years and had zero rubbing, even when on the track.

Quote:

Originally Posted by Tano22

I have the same setup as on the dinan website. Haven't had rubbing yet.

wheel and tire specs? are you on dinan springs? suspension specs? camber?

Saab Story · 12-02-2018, 04:20 PM

Quote:

Originally Posted by designatedposter

Quote:

Originally Posted by Saab Story

Quote:

Originally Posted by Jnat

Any pic's of 235 front and 265 rears lowered or other?

Here was my setup on my last car: Dinan springs with BBS CI-Rs wrapped with 235 up front & 265 in the rear. Had this setup for close to 3 years and had zero rubbing, even when on the track.

Quote:

Originally Posted by Tano22

I have the same setup as on the dinan website. Haven't had rubbing yet.

wheel and tire specs? are you on dinan springs? suspension specs? camber?

19x9 et48 rear with 265-30 mpss tires and 19x8 et45 front with 235-30 tires and 3mm spacer up front to make the 235s clear the suspension

Dinan springs with alignment as close to stock as possible

This setup is perfectly flush front and rear

Tano22 · 12-03-2018, 11:51 AM

Quote:

Originally Posted by Saab Story

Quote:

Originally Posted by designatedposter

Quote:

Originally Posted by Saab Story

Quote:

Originally Posted by Jnat

Any pic's of 235 front and 265 rears lowered or other?

Here was my setup on my last car: Dinan springs with BBS CI-Rs wrapped with 235 up front & 265 in the rear. Had this setup for close to 3 years and had zero rubbing, even when on the track.

Quote:

Originally Posted by Tano22

I have the same setup as on the dinan website. Haven't had rubbing yet.

wheel and tire specs? are you on dinan springs? suspension specs? camber?

19x9 et48 rear with 265-30 mpss tires and 19x8 et45 front with 235-30 tires and 3mm spacer up front to make the 235s clear the suspension

Dinan springs with alignment as close to stock as possible

This setup is perfectly flush front and rear

Same but without the spacer, and ps4s instead of mpss

B58togo · 12-24-2018, 11:48 AM

I'm going to make the leap from 255 Pilot SS to 265 P4S next spring. I'm running Apex EC-7 18x9.5 et58 with a 5mm spacer, so effectively an et53 offset. If a 9" et48 works, I'll be 1.35mm further out. Should be fine on the outside, but possibly some slight rub on the strut cover? I'm on Dinan springs too.

Joe240 · 12-24-2018, 06:43 PM

I’d measure everything as your car sits right now with spacing to the fender and strut, and then take those measurements and tire sizes over to https://www.wheel-size.com/calc/ and I put all of that information. It will let you see how the new tire size will fit in comparison to your new setup.

sea_m2c · 01-18-2019, 11:46 PM

Found this thread. Good info

I'm running 19x8.5 235/30/19 ET35, 19x9.5 265/35/19 ET45. It seems like they should just fit with Dinan springs based on what's been posted here already. I'm going to measure and use the Wheel Size website posted though.

Anyone have reason to think my fitment would not fit?

MiamiM235iEstorilBlue · 01-20-2019, 10:45 PM

Quote:

Originally Posted by sea_m235i

Found this thread. Good info

I'm running 19x8.5 235/30/19 ET35, 19x9.5 265/35/19 ET45. It seems like they should just fit with Dinan springs based on what's been posted here already. I'm going to measure and use the Wheel Size website posted though.

Anyone have reason to think my fitment would not fit?

Definitely keep us posted! I think the M235i looks so much better with about as much tire as we can get without rubbing, which is a dealbreaker for me.

B58togo · 02-03-2019, 07:37 PM

Quote:

Originally Posted by sea_m235i

Found this thread. Good info

I'm running 19x8.5 235/30/19 ET35, 19x9.5 265/35/19 ET45. It seems like they should just fit with Dinan springs based on what's been posted here already. I'm going to measure and use the Wheel Size website posted though.

Anyone have reason to think my fitment would not fit?

You should be fine on the rear strut, but you'll be pushing it on the rear quarter without some extra camber dialed in. I'm currently on a 9.5" et53 rear with a 255 PSS, and I think I'll be fine with a 265 PS4S on the outside, but not so sure if I had the extra 8mm of poke you'll have.

Joe240 · 02-03-2019, 08:47 PM

This is my vmr v801 with 265/35/18 PS4S. I don't think Dinan springs alone will camber the back enough to clear the quarter panel.

stlb5 · 02-03-2019, 08:49 PM

Quote:

Originally Posted by Joe240

This is my vmr v801 with 265/35/18 PS4S. I don't think Dinan springs alone will camber the back enough to clear the quarter panel.

What offset?

11-04-2018, 10:14 PM	#1
stlb5 Lieutenant 217 Rep 519 Posts Drives: '19 M2C MT, '15 X5 Msport Join Date: Jan 2017 Location: St. Louis iTrader: (0)	Will 265's fit with Dinan springs? Looking at a 19X9.5 ET44 wheel. Will a 265/30 MP4S tire fit and not rub? __________________ 2019 M2 Comp, MT, BSM 2015 X5 Msport, CB (Hers) 2014 M235i MT, BSM, MPE, Dinan Springs (Sold)
	Appreciate 1 WillOs7.00 Tweet Quote

11-05-2018, 11:07 AM	#2
aturk Private First Class 42 Rep 115 Posts Drives: 2014 BMW M235i Join Date: Jan 2018 Location: Charlotte, NC iTrader: (0)	Look at the Dinan Site, they have their Stage 3 M235i wheel/tire specs on the site. I think they fit a 265 out back. __________________ 2014 M235i
	Appreciate 0 Quote

11-05-2018, 11:40 AM	#3
jmwilson125 Major 340 Rep 1,184 Posts Drives: 2016 M235i Join Date: Feb 2015 Location: Somerville, Ma iTrader: (0)	- HRE FF15 Wheels 18x8.5ET40 & 18x9ET44 in Tarmac Black - MPSS 235/40/18 and 265/35/18 This is my setup and it fits no problem. I think the 9.5 wouldn't be all issue either. There are a few 265 threads out there too that may specifically cover the 9.5 setup
	Appreciate 1 jmkr29.50 Quote

12-01-2018, 10:33 AM	#6
Jnat DisplacementReplacement 394 Rep 1,090 Posts Drives: 2020 X3M Join Date: Sep 2012 Location: Jersey Shore iTrader: (0)	Any pic's of 235 front and 265 rears lowered or other? __________________ 2020 X3M /// MHD Tune Prior Bimmers 2017 240XI Hybrid / FBO / MHD E40 2015 235XI FBO / MHD E30 2009 335XI FBO / COBB / E30
	Appreciate 0 Quote

12-02-2018, 10:42 AM	#8
Joe240 Major 2924 Rep 1,303 Posts Drives: 2021 C8 Corvette 1LT Join Date: Jul 2016 Location: Pensacola iTrader: (0) Garage List 2020 GMC Sierra AT4 [0.00] 2019 BMW X3 M40i [0.00]	19x9.5et44 with 265/35. I have about 5mm of poke and stock suspension. Looks to me that I would rub if I lowered. But who knows, maybe the slight camber when lowered would allow for a narrow miss
	Appreciate 0 Quote

12-02-2018, 10:45 AM	#9
Joe240 Major 2924 Rep 1,303 Posts Drives: 2021 C8 Corvette 1LT Join Date: Jul 2016 Location: Pensacola iTrader: (0) Garage List 2020 GMC Sierra AT4 [0.00] 2019 BMW X3 M40i [0.00]	Also, Dinan fit 265 in the rear using the BBS 19x9et45 (or 47? IDR exact). That’s why they were able to fit the 265 in the rear. That slight inward movement of the wheel clears the fenders
	Appreciate 0 Quote

12-02-2018, 10:47 AM	#10
bryan_G01 Lieutenant Colonel 1165 Rep 1,931 Posts Drives: like i stole it... Join Date: Jun 2012 Location: NY iTrader: (0)	could do with apex fitments... i could easily get a 265 out back, on 255 now. tire manufacture will be the hurdle. __________________ www.nybmwcca.org Current Cars: 1995 M3 Coupe Manual Alpine White 1997 M3 Sedan Auto Cosmo Black Metallic 2018 x3 m40 Auto Grey Metallic
	Appreciate 0 Quote

12-02-2018, 01:05 PM	#11
Tano22 Private First Class 148 Rep 191 Posts Drives: 2024 BMW M4 Competition XDrive Join Date: Nov 2011 Location: Miami, FL iTrader: (0) Garage List 2024 BMW X3 SDrive30i [0.00] 2024 BMW M4 Competi ... [9.75]	I have the same setup as on the dinan website. Haven't had rubbing yet. Attached Images
	Appreciate 0 Quote

12-24-2018, 11:48 AM	#16
B58togo Major 807 Rep 1,368 Posts Drives: M240i Join Date: Feb 2017 Location: NY iTrader: (0)	I'm going to make the leap from 255 Pilot SS to 265 P4S next spring. I'm running Apex EC-7 18x9.5 et58 with a 5mm spacer, so effectively an et53 offset. If a 9" et48 works, I'll be 1.35mm further out. Should be fine on the outside, but possibly some slight rub on the strut cover? I'm on Dinan springs too. __________________ 2017 M240i/ ZF8 Pure Drivetrain Solutions Stage 1 & torque converter/xHP/ Pure 800 cast/ DS2/ E40 Doug Newton tuned/ ER catless DP/ Remus axle back/ BMS intake/ FTP CP/ M Performance LSD
	Appreciate 0 Quote

12-24-2018, 06:43 PM	#17
Joe240 Major 2924 Rep 1,303 Posts Drives: 2021 C8 Corvette 1LT Join Date: Jul 2016 Location: Pensacola iTrader: (0) Garage List 2020 GMC Sierra AT4 [0.00] 2019 BMW X3 M40i [0.00]	I’d measure everything as your car sits right now with spacing to the fender and strut, and then take those measurements and tire sizes over to https://www.wheel-size.com/calc/ and I put all of that information. It will let you see how the new tire size will fit in comparison to your new setup.
	Appreciate 0 Quote

01-18-2019, 11:46 PM	#18
sea_m2c Private First Class 82 Rep 170 Posts Drives: 2019 M2C - 6MT Join Date: Oct 2017 Location: Seattle iTrader: (0)	Found this thread. Good info I'm running 19x8.5 235/30/19 ET35, 19x9.5 265/35/19 ET45. It seems like they should just fit with Dinan springs based on what's been posted here already. I'm going to measure and use the Wheel Size website posted though. Anyone have reason to think my fitment would not fit? __________________ Current: 2019 M2 Comp, Coilovers, Camber Plates, Rogue SSK, AA Single MP, BM3 Stg 1 Sold: 2015 M235i RWD, MHD Stage 2, FBO, MPE, XHP, HPD5Evo \| IG @sea_m235i
	Appreciate 1 MyMiniM330.00 Quote

02-03-2019, 08:47 PM	#21
Joe240 Major 2924 Rep 1,303 Posts Drives: 2021 C8 Corvette 1LT Join Date: Jul 2016 Location: Pensacola iTrader: (0) Garage List 2020 GMC Sierra AT4 [0.00] 2019 BMW X3 M40i [0.00]	This is my vmr v801 with 265/35/18 PS4S. I don't think Dinan springs alone will camber the back enough to clear the quarter panel. Attached Images __________________ Project Car: DF Goblin -Built LSJ-T 2021 C8 Corvette 1LT 2021 Model Y Performance
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search