Seat bolster is already showing wear. Any input?

BentZero · 05-30-2016, 07:51 AM

Quote:

Originally Posted by vert_lover

I coded in easy access for the seat (moves back a few inches on shut-down/door open, moves forward again on engine start) and that helped, but I was still catching the bolster now and then on entry.

Finally just had to get in the habit of getting in ass first and then swinging my legs in. The easy access makes this easier to do without touching the bolster, so till a valid coding change.

Oh snap, do you remember where that setting is? I'll code this in right now. In addition to ass first I've also started to grab the bolster with my left hand just to further ensure that my super destructive shorts don't touch the seat. :/

SMB F83 · 05-30-2016, 11:37 PM

Quote:

Originally Posted by BentZero

Oh snap, do you remember where that setting is? I'll code this in right now. In addition to ass first I've also started to grab the bolster with my left hand just to further ensure that my super destructive shorts don't touch the seat. :/

Sorry, was out working on the car all day and didn't see this till now.

The settings I used to get this working were:

"FDL Coding:
SM2 -> 3000 SM_GLOBAL -> EINAUSSTIEGSHILFE = Modus_FA_SLV
SM2 -> 3012 EAH -> EAH_VERFAHRWEG_SLV_PHYS = Werte=00, 28
SM2-> 3012 EAH -> EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS = Werte=00, 3C"

From the thread:

http://f30.bimmerpost.com/forums/sho...6&postcount=18

Kolyan2k · 05-31-2016, 11:15 PM

Damn it, I need to learn coding

BentZero · 06-01-2016, 07:29 AM

Quote:

Originally Posted by Kolyan2k

Damn it, I need to learn coding

It's super easy. It's just a bit nerve wracking on the first go of it.

Kolyan2k · 06-01-2016, 03:41 PM

Quote:

Originally Posted by BentZero

It's super easy. It's just a bit nerve wracking on the first go of it.

Yeah I heard.....

Want to buy this cable per another member recommendation

http://m.ebay.com/itm/121604135320?_...49&_mwBanner=1

BentZero · 06-01-2016, 04:18 PM

Yup, ignore the software they send with it. At least in my experience it was very outdated. Asking for latest launcher and data files in the cheatsheet thread will get you what you need.

Kolyan2k · 06-06-2016, 02:01 PM

Quote:

Originally Posted by vert_lover

Sorry, was out working on the car all day and didn't see this till now.

The settings I used to get this working were:

"FDL Coding:
SM2 -> 3000 SM_GLOBAL -> EINAUSSTIEGSHILFE = Modus_FA_SLV
SM2 -> 3012 EAH -> EAH_VERFAHRWEG_SLV_PHYS = Werte=00, 28
SM2-> 3012 EAH -> EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS = Werte=00, 3C"

From the thread:

http://f30.bimmerpost.com/forums/sho...6&postcount=18

Quote:

Originally Posted by BentZero

It's super easy. It's just a bit nerve wracking on the first go of it.

Hey guys, I have 2 different SM2 folders

SM2(6e) and SM2(6d) Which one do I code ?

BentZero · 06-06-2016, 02:15 PM

Quote:

Originally Posted by Kolyan2k

Hey guys, I have 2 different SM2 folders

SM2(6e) and SM2(6d) Which one do I code ?

I think that D is driver's side. I haven't gotten around to coding it yet because I was still taking kids to school.

Kolyan2k · 06-06-2016, 04:50 PM

Quote:

Originally Posted by BentZero

I think that D is driver's side. I haven't gotten around to coding it yet because I was still taking kids to school.

Coded SM2 D, only first line and it worked. Other 2 lines have to do with how far seat moves etc

BentZero · 06-09-2016, 10:40 PM

Quote:

Originally Posted by vert_lover

Quote:

Originally Posted by BentZero

Oh snap, do you remember where that setting is? I'll code this in right now. In addition to ass first I've also started to grab the bolster with my left hand just to further ensure that my super destructive shorts don't touch the seat. :/

Sorry, was out working on the car all day and didn't see this till now.

The settings I used to get this working were:

"FDL Coding:
SM2 -> 3000 SM_GLOBAL -> EINAUSSTIEGSHILFE = Modus_FA_SLV
SM2 -> 3012 EAH -> EAH_VERFAHRWEG_SLV_PHYS = Werte=00, 28
SM2-> 3012 EAH -> EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS = Werte=00, 3C"

From the thread:

http://f30.bimmerpost.com/forums/sho...6&postcount=18

Finally got around to coding this. So nice. Makes it so easy to get into the car without rubbing up against the seat.

Anthony235 · 06-10-2016, 09:58 AM

I need to code this too! I've been manually moving the seat back and forth using the memory buttons.

BentZero · 06-10-2016, 10:00 AM

Only one odd quirk. If you just hop into your car and start the engine the seat will move, pause, engine will start, then start moving again. I usually hop in and turn the car on to put it into sport+ without turning on the engine first, so the seat moves and then stops when it's done. Then I turn the car on. I guess I'm the odd quirk in my scenario lol.

Kolyan2k · 06-11-2016, 07:25 AM

Quote:

Originally Posted by BentZero

Only one odd quirk. If you just hop into your car and start the engine the seat will move, pause, engine will start, then start moving again. I usually hop in and turn the car on to put it into sport+ without turning on the engine first, so the seat moves and then stops when it's done. Then I turn the car on. I guess I'm the odd quirk in my scenario lol.

Same, also don't start the engine with open door, seat will not move at all after that even if door is closed.

BentZero · 06-11-2016, 09:02 AM

Quote:

Originally Posted by Kolyan2k

Quote:

Originally Posted by BentZero

Only one odd quirk. If you just hop into your car and start the engine the seat will move, pause, engine will start, then start moving again. I usually hop in and turn the car on to put it into sport+ without turning on the engine first, so the seat moves and then stops when it's done. Then I turn the car on. I guess I'm the odd quirk in my scenario lol.

Same, also don't start the engine with open door, seat will not move at all after that even if door is closed.

Yup, just noticed this. Same with turning off the engine. If the door is open your egress will be less comfortable.

05-31-2016, 11:15 PM	#25
Kolyan2k Major General 928 Rep 5,538 Posts Drives: 2006 S2000 Join Date: Apr 2010 Location: Boston iTrader: (1)	Damn it, I need to learn coding
	Appreciate 0 Quote

06-01-2016, 04:18 PM	#28
BentZero Lieutenant Colonel 625 Rep 1,753 Posts Drives: 6MT Mineral White M235i Join Date: Oct 2015 Location: Charleston, SC iTrader: (2)	Yup, ignore the software they send with it. At least in my experience it was very outdated. Asking for latest launcher and data files in the cheatsheet thread will get you what you need.
	Appreciate 0 Quote

06-10-2016, 09:58 AM	#33
Anthony235 Lieutenant Colonel 715 Rep 1,541 Posts Drives: m235i Join Date: Feb 2016 Location: OC, Ca iTrader: (2) Garage List 2015 BMW [0.00]	I need to code this too! I've been manually moving the seat back and forth using the memory buttons.
	Appreciate 0 Quote

06-10-2016, 10:00 AM	#34
BentZero Lieutenant Colonel 625 Rep 1,753 Posts Drives: 6MT Mineral White M235i Join Date: Oct 2015 Location: Charleston, SC iTrader: (2)	Only one odd quirk. If you just hop into your car and start the engine the seat will move, pause, engine will start, then start moving again. I usually hop in and turn the car on to put it into sport+ without turning on the engine first, so the seat moves and then stops when it's done. Then I turn the car on. I guess I'm the odd quirk in my scenario lol. __________________ I rev-match from neutral to first 6MT Mineral White on black M235i coupe Build thread
	Appreciate 0 Quote