04-10-2020, 01:08 AM | #1 |
Private First Class
117
Rep 124
Posts |
Pure Stage 2 DIY / Installation Kit Parts
I was able to source a Pure Stage 2 for a great price from a friend parting out his car and planning to install it in the coming months.
I'm aware that Pure also sells the install kit from there website but I'm genuinely interested in input from anyone that's been able to source the parts from FCP Euro or other BMW dealership websites. I've put the following together from what I could source from other forums with a link to the google sheet I created below (I'll edit and update as needed). https://docs.google.com/spreadsheets...it?usp=sharing Also, if anyone could identify these 4 circled in red, that would help a lot - I believe they're used on the wastegate actuator but I can't find the part numbers. I figure this thread could serve as a starting point for anyone considering putting together their own kit + additional parts to consider while doing the turbo anyway. |
04-10-2020, 10:51 AM | #3 |
Private First Class
117
Rep 124
Posts |
I don't think so, the exhaust manifold nuts are the 15 longer pieces in the bottom right of the Pure picture.
I'm almost positive they're the "B" nuts found here: https://www.realoem.com/bmw/enUS/sho...73#11657593303 but i have no part numbers or way to verify, at least until the turbo is off the car. |
Appreciate
0
|
04-10-2020, 07:16 PM | #4 |
Driver - Autocross
75
Rep 178
Posts |
Being pretty good with ICE's. Installing a turbo on the F22 M235i is pretty dang easy considering everything...
__________________
16 M235xi 8ZF Black on Red FBO: Xhp trans tune -BMS Intake - VRSF Catless DownPipe - VRSF CP - VRSF Muffler delete/resonator - n22 plugs - MHD stage 2+ 95map - Wagner EVO II Preformace IC - Rear seat delete - weight reduction/stripping -FTP 18.5in rims - Hawk HPS front pads - StopTech STR 660 fluid
|
Appreciate
1
MLJR235116.50 |
Post Reply |
Bookmarks |
|
|