05-15-2016, 05:33 PM | #23 |
Second Lieutenant
94
Rep 244
Posts |
|
Appreciate
0
|
05-15-2016, 10:47 PM | #24 |
Lieutenant
624
Rep 568
Posts |
+1 + Infinity
__________________
2017 M2 | MGM | 6SPD Std | RWD | MP Exhaust | CSF FMIC | Active Autowerke DP w/ HF CAT | FTP Charge & Boost Pipes | Fortune Auto series 500 7k/14k coilovers | CDT Audio ES Gold Fronts & HD series Rear | Richland Forged Project Nurburg RF-GT4 Wheels | AudioControl LC-6.1200 | JL Audio TWK 88 | CF Goodies
|
Appreciate
0
|
05-15-2016, 10:53 PM | #25 |
Lieutenant
624
Rep 568
Posts |
The offsets are 35mm for all of the wheels & they're 18x8". They do not poke at all, no matter what else you might read about 18x8" & 35mm offsets. The rears push out about an extra 1/2"; they're just shy of the wheel well edge.
Yes, the OEM center caps do fit perfectly. But they wheels come with a plain black center cap. If you buy a 62-65mm BMW emblem and double-sided sticky tape, you can have a second set of BMW emblem center-caps. The fronts push out a little farther, but are still tucked slightly inside the wheel well edge. Since both wheels push out a little farther, the "wheel gap" also appears shorter. An added benefit if you want to lessen that gap but you're concerned about lowering the car. And there is no rub. I sent you a PM on price & e-tailer. Jim
__________________
2017 M2 | MGM | 6SPD Std | RWD | MP Exhaust | CSF FMIC | Active Autowerke DP w/ HF CAT | FTP Charge & Boost Pipes | Fortune Auto series 500 7k/14k coilovers | CDT Audio ES Gold Fronts & HD series Rear | Richland Forged Project Nurburg RF-GT4 Wheels | AudioControl LC-6.1200 | JL Audio TWK 88 | CF Goodies
|
Appreciate
0
|
05-16-2016, 09:05 AM | #26 | |
Captain
432
Rep 887
Posts
Drives: Enzo F23 228i
Join Date: May 2015
Location: MD, USA
|
Quote:
|
|
Appreciate
0
|
05-15-2020, 06:08 PM | #28 | |
Registered
0
Rep 3
Posts |
Quote:
Just did the same thing and threw the boxes away..... One end of the side blade has a second piece of 3m about 2 inches long, does that go at the front or the rear of the car? |
|
Appreciate
0
|
05-16-2020, 09:44 PM | #29 |
Captain
176
Rep 765
Posts |
Look at post #6 on this thread, that was what I used to get them right. I can't remmember if the extra 3m tape goes towards the front or back, after all it has been 4 years since got them installed, lol.
|
Appreciate
0
|
05-18-2020, 03:42 AM | #30 |
Registered
0
Rep 3
Posts |
I sorted it, thanks Joaco for the response, for those with the same issue in the future....
There is actually a LH (left hand) and RH (right hand) printed on each blade which tells you which is which. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|