[Conr4d]

I am curious to hear what custom burble settings everyone is running with their Bootmod3 tune.

Be sure to mention your down pipe + exhaust set up and which Bootmod3 map you’re running.

Here are my current burble settings below. Stock down pipe, Dinan Resonator Delete, Dinan Exhaust. Stage 1 93 octane map.

[n55d_more_alpine]

Wish more people had replied to this! I'm flashing bm3 for the first time tonight and will let you know what settings I end up sticking with. Are these the settings you still run today? I kind of want a more natural sounding backfire so I was thinking high aggression and low duration would achieve something like that.

[Conr4d]

Originally Posted by Oliboy_C

Wish more people had replied to this! I'm flashing bm3 for the first time tonight and will let you know what settings I end up sticking with. Are these the settings you still run today? I kind of want a more natural sounding backfire so I was thinking high aggression and low duration would achieve something like that.

Agreed! I posted this on the F30 forum and received more responses in that thread. Since the thread was created, I have added a catless downpipe and I am running the following settings and have been happy with the results.

FYI. Pro Tuning Freaks does not recommend running the burble aggression setting higher than 5.6 with the stock downpipe to avoid damaging the catalytic converter.

[meppadua]

Do you guys have any sound or video clips of you burble settings?

[Conr4d]

Originally Posted by meppadua

Do you guys have any sound or video clips of you burble settings?

You bet!

https://youtu.be/yEutWAQZDF8

https://youtu.be/2e5MHHANfAw

[meppadua]

Originally Posted by Conr4d

You bet!

https://youtu.be/yEutWAQZDF8

https://youtu.be/2e5MHHANfAw

Originally Posted by Conr4d

You bet!

Sounds like a Beast! What Exhaust are you runnin? I currently have MPE.

[meppadua]

Originally Posted by Conr4d

You bet!

Ooh shoot i re read tha post!

[german_redneck]

I didn't know you could do a custom burble with bm3... I need it even more now

[Gavin_435]

I run the agressive 91 stage 2 set at 1.5 seconds and 3 for the amount

[meppadua]

CTS CatLess DownPipe, MPE, 91 Stg 1 OTS,
Ive changed my Burble Settings 3times but here it is

[MLJR235]

Originally Posted by Conr4d

Be sure to mention your down pipe + exhaust set up and which Bootmod3 map you’re running.

Very important to mention downpipe + exhaust configurations... Someone with catless dp + straightpipe exhaust will get significantly more pronounced burbles/pops off a lower aggression setting vs someone that has OEM cats+muffler.

[XutvJet]

Be very careful with those burble tunes on cars with cats. There is much evidence that shows that the aftermarket burble tunes set to more aggressive burbles will melt the cat over time.

[FengYu999]

i just set the aggression all the way to the top this afternoon, but i have only done a muffler deleted and anything else are stock, is it gonna be fine?

[vrooooom]

OTS map Stage 1 93 octane. Sport +. Canyon runs. I'm finding the burbles seem to last myb 3-4s. Is this the default of the OTS? It's a lot longer than factory (OEM). I don't like all that burbles, seems like the car is broken. A little goes a long way IMHO.

When I look at the setting it just says 1.5s though. In addition, why is the setting only for Sport, there's none indicated for Sport +.

[FoodForThought]

+++ will add some info after I get my DP and BM3 tune next week