[Cripple]

Originally Posted by M.barnes

The problem is that the offset is quite narrow. Basically you have 3 series running gear on a smaller width car so the wheels take most of the difference.

While an m3 etc will take 10" et25 ish this car will struggle with 9.5" et50.

Most manufacturers go for concave wheels which look great but need an offset that won't fit. Much like the photoshop above that has no chance of going on at the back lol.

Morr and all the forged wheel makers will be able to do something as they just custom make them but don't expect big concaved rear wheels

These wheels will fit a ET35 9.5 in the rear quite easily, the render is something quite similar to that size

[maddoc]

Originally Posted by Cripple

These wheels will fit a ET35 9.5 in the rear quite easily, the render is something quite similar to that size

I'm looking forward to seeing the final outcome of this.

[M.barnes]

Ok I stand corrected lol the m235i will take an et35 9.5 wheel.

You buy them first though as I don't believe it lol

[maddoc]

Originally Posted by M.barnes

Ok I stand corrected lol the m235i will take an et35 9.5 wheel.

You buy them first though as I don't believe it lol

The better question should probably be - what tire size is one planning to run on the et35 9.5 wheel...

[templarklimek]

I'm going with the following: I hope I can fit 245/30/199F) and 275/30/19(r)

[Tim917]

Curious if these will fit. (yes I know the site SAYS they fit) Seems pretty inexpensive comparatively speaking - anyone have experience/knowledge about the manufacturer?



http://www.bavauto.com/fland.asp?par...FQWTfgodAZcAhw

[M.barnes]

With them only being 8.5 wide they should be fine

[Boneman]

I checked with VMR and they have tried several of there wheels and the 705 is the only one and that is 18s square all around.

[Uponone76]

Originally Posted by Boneman

I checked with VMR and they have tried several of there wheels and the 705 is the only one and that is 18s square all around.

Yep, told me the same thing.....

I checked with MORR, they claim to have several sizes and styles that fit, but won't release the available offsets nor do they have any pics.

[metrickid]

Originally Posted by Cripple

These wheels will fit a ET35 9.5 in the rear quite easily, the render is something quite similar to that size

There is NO chance that they will be that concave. That is more than the F30 manages and they can fit 11" wheels with some lube and good will.
9.5" ET35 sounds like a lot too, comparable to my rear wheels and they are flush when slammed on the F30.

But I would love the be proven wrong since the F22 deserves nice wheels!

[TB///M3]

I just picked up some volk racing G2 the spec as follow: 18/8 et 45 and rears 18/9 et 50 wrapped with 225/ 40 and 255/35 ...

Think these will fit fine? Basically its 135i specs.

[escobar929]

I can see how a 9.5 et35 will fit and would love to see it, tons of poke but don't think it's something your average joe will like to run

The AluFelgen CS7 in 1er fitment should work nicely, that might be the route I go unless I see something else I like

[cbbplanet]

i think the fitment of the wheels is about the same as 1 series... might as well buy wheels for the 1 series

[M.barnes]

any progress on your ADV1 wheels?

[Cripple]

Couple more weeks out. Doing 19x9.5 with ET47 in the rear

[M.barnes]

Good choice. Any hints on what style?

[AnooooOH]

The problem isn`t the rear, it`s the front.
I`m on 8,5 et 40 in the front and it rubbed a bit.

But I`m running 9,5 et 50 in the rear and it looks like this:





Here you can find more pics:
http://www.2addicts.com/forums/showthread.php?t=978070

[cbbplanet]

Originally Posted by AnooooOH

The problem isn`t the rear, it`s the front.
I`m on 8,5 et 40 in the front and it rubbed a bit.

But I`m running 9,5 et 50 in the rear and it looks like this:

Here you can find more pics:
http://www.2addicts.com/forums/showthread.php?t=978070

are you lowered? this guy ran 19x8.5 et 35 and it looks fine.
http://www.2addicts.com/forums/showthread.php?t=982703


ps. all your photobucket links are broken.

[AnooooOH]

Originally Posted by cbbplanet

are you lowered? this guy ran 19x8.5 et 35 and it looks fine.
http://www.2addicts.com/forums/showthread.php?t=982703


ps. all your photobucket links are broken.

I`m on kw v3s.

yes, bandwidth exceeded.
but it should be okay again tomorrow.

[cbbplanet]

Originally Posted by AnooooOH

I`m on kw v3s.

yes, bandwidth exceeded.
but it should be okay again tomorrow.

I sort of remember your car and the height is lower than h&r springs i believe. What tire size are you running? might wanna stretch a little bit and then you'll be perfectly fine.

[AnooooOH]

Originally Posted by cbbplanet

I sort of remember your car and the height is lower than h&r springs i believe. What tire size are you running? might wanna stretch a little bit and then you'll be perfectly fine.

pics are working again!

I`m on 225/255 michelin pss.

[cbbplanet]

Originally Posted by AnooooOH

pics are working again!

I`m on 225/255 michelin pss.

nice. the front looks perfectly flush. I'm surprised, would think back rubs more than front.