[Nicksoap]

I have a 2016 BMW M235i and recently while driving I had a Chassis function restricted error pop up. Took off my wheel and checked the wires but everything looks fine. Wires are plugged in and none of the sensors or wires look to be broken. Any ideas?


482A26 Valve coil - front right - open circuit
482A24 Valve coil - front right - short circuit terminal 15 / terminal 30

[aerobod]

The valve control within the damper has probably failed. The dampers should still work, but will default to one setting and won't be able to be adjusted. Probably needs a resistance check with a multi-meter to confirm the issue is inside the damper and not a fractured wire connecting to it.

[Nicksoap]

Originally Posted by aerobod

The valve control within the damper has probably failed. The dampers should still work, but will default to one setting and won't be able to be adjusted. Probably needs a resistance check with a multi-meter to confirm the issue is inside the damper and not a fractured wire connecting to it.

Thanks for the response, is there anyway you could explain about the damper? I have no idea where that is or what it even is.

[aerobod]

Originally Posted by Nicksoap

Thanks for the response, is there anyway you could explain about the damper? I have no idea where that is or what it even is.

The damper is the shock (or damping part of the shock absorber), but just the term used in English vs American.