11-30-2020, 09:31 AM | #1 |
New Member
2
Rep 17
Posts |
FS: Staggered Vertini RF1.2 19x8.5/9.5 ET35/45
I'm selling a set of Vertini RF1.2 wheels (now called RFS1.2) finished in Brushed silver 19x8.5/9.5 ET35/45. These wheels are in perfect condition, they came on my 135i when I bought the car earlier this year. I believe these wheels are forged, they are extremely light. I decided to swap these wheels out for a set of 18 inch wheels due to the rough roads in Boston. I just had a local wheel shop certify that these wheels are true and straight. I am asking $1,000 for these wheels and would like to sell them to someone in New England to avoid shipping but would ship them if the buyer pays shipping. I have the original boxes from these wheels. |
12-03-2020, 05:27 PM | #2 |
Second Lieutenant
21
Rep 207
Posts |
Nice. any modifications needed? spacers??
__________________
2020 BMW 240i, Black/black, Dinan+ tune, Carbon fiber intake and MPE.
Previous rides: 2016 BMW 235i Estoril Blue/Black, Dinan S2 and intake 2011 and 2012 135i Convertible Cobb AP Stage 1 |
Appreciate
0
|
12-06-2020, 01:10 PM | #3 |
New Member
2
Rep 17
Posts |
Runnerlk,
What car were you planning on running these wheels on? I bought my 135i with these wheels on it, The previous owner put them on the car when the suspension was stock and ran into no issues. When he installed the M control arms and installed the swift spring and koni yellow shocks the tires started rubbing. I decided to swap out these wheels for a set of Apex wheels which actually still rubbed pretty much the same way. I ended up changing the suspension out, installed Ohlin Road and Track coilovers with camber plates that provided a bit more adjustability. The car is a little higher in the front end now but I have zero rubbing issues now. Long story short I think my rubbing issues was either caused by something that was wonky in the suspension geometry or that the car was a little too low. If I were to put tires on these wheels and put them back on my car I don't think I would run into any issues at all. The previous owner of the car had these drilled by the MFG from blanks to fit the 135i. Below is the build threat the previous owner of my car put together. There is a bit of information about these wheels in there. https://www.1addicts.com/forums/show....php?t=1680666 |
Appreciate
0
|
12-08-2020, 05:21 PM | #4 |
Second Lieutenant
21
Rep 207
Posts |
I've got a stock F23 and thought they would look great
__________________
2020 BMW 240i, Black/black, Dinan+ tune, Carbon fiber intake and MPE.
Previous rides: 2016 BMW 235i Estoril Blue/Black, Dinan S2 and intake 2011 and 2012 135i Convertible Cobb AP Stage 1 |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|