Coded out EDC, sport mode is back but cannot be configured |
Post Reply |
|
Thread Tools | Search this Thread |
07-12-2021, 06:48 PM | #1 |
Private First Class
73
Rep 196
Posts |
Coded out EDC, sport mode is back but cannot be configured
Got beautiful KWV3s (amazing upgrade) and have been playing with the new setup. Finally got around to coding out EDC to get rid of Chassis warning.
On ESYS I removed 2VF from FA, then VO coded ICM, KOMBI, HU-NBT, and DSC to reflect the change. It removed quite a bit of my bimmercode settings so I recoded them from backups, all went smoothly until I recoded the ICM from a backup and the chassis light came back on. I recoded to my backup of the new EDC-out coding, and it was all good again. HOWEVER, while error-land was back it also restored my use of the ability to code my sport function to "chassis" only. Which is my goal (linear throttle and heavier steering without my sport setting burbles) All modes work as described without the ability to configure sport mode specifically, I think this narrows down that option into the Int Chassi Management module, but I have no idea how to turn it back independently. How can I get that option back without the car wanting oem struts on board.
__________________
14' Alpine White M235i 6MT, BM3 Stg2+, VRSF DP-CP-FMIC, Dinan Muffler, GFB DV+, 3.5 bar MAP, Dorch Stg1 HPFP, NGK 97506, BM3 Flexfuel Kit, CDV delete, KW V3, EDC delete, Powerflex Camber LCA bushings, VMR 801 18x8.5/9.5 et45, Conti Extremecontact 235/265
Next step: M2 Competition or Manual Supra MKV build Summer 2022 |
Post Reply |
Bookmarks |
|
|