[35mmSummicron]

I saw a number of older posts with members having difficulty coding their 2er convertibles to fold mirrors but losing rag top functionality on production builds after 07/14.

I have successfully coded the following:

2018 LCI f23 m240i convertible

-open/close mirrors from FOB
-open/close mirrors from comfort access door handles
-open/close windows from FOB
-open/close convertible top from FOB
-open/close convertible top from inside car button
-close windows from comfort access door handles
-close convertible top from comfort access door handles

FH_CABRIO_VERDECK_MODUL > AKTIV
KOMFORTOEFFNUNG_FB > AKTIV
KOMFORTSCHLIESSUNG_FB > NICHT_AKTIV
KOMFORTOEFFNUNG > AKTIV
KOMFORTSCHLIESSUNG > AKTIV
KOMFORTSCHLIESSUNG_PA > AKTIV
KOMFORT_SCHLIESSEN > WERTE = 00 (mirror delay to near instant close)

ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN > AKTIV
ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN > AKTIV

Hope this helps!

ps. One thing I find odd is when I open the rag top from FOB the doors can be open and the engine doesn't need to be on, but the rag top button inside the car requires doors shut and engine on--wonder if this can be coded?

[SlimJay]

How do I code just open/close windows with fob?

[35mmSummicron]

for FOB only, should be:

HU_NBT2 > FEM_BODY > 3053

FH_CABRIO_VERDECK_MODUL > AKTIV
KOMFORTOEFFNUNG_FB > AKTIV
KOMFORTSCHLIESSUNG_FB > NICHT_AKTIV

[TwistedX]

When you lock with the keyfob, does your mirrors occasionally not fold?

[35mmSummicron]

Originally Posted by TwistedX

When you lock with the keyfob, does your mirrors occasionally not fold?

Yes, and I am guessing the mirror folding from fob may operate similar to fob ragtop down—you need to be within 5 feet of the car. Note this is not the same with locking doors from fob.

I did not notice this behaviour when I coded folding mirrors in my F30 3-series sedan.

[caspload]

Hi,

Sorry to revive an old thread, but would this work in similar models?

Got a 2016 220i f23 Convertible and was hoping to enable fob control for windows and roof and this is the only post even close!

[35mmSummicron]

Yes, the coding should work for all F23's newer than MY'14. There weren't major changes that I know of. I've since gone from ESys coding to using Bimmer Code. MUCH easier, even in expert mode.