[Baker]

BIMMERPOST / Classifieds

Asking Price:

None

Or Best Offer

Location:

✓ Local Pickup Only

Item Interest

Set of Bimmerworld TA5R 17x9 et42 5x120 with tpms

E36, E46, E9X, F2X, F3X, Z3, Z4

94124 pickup only

[Baker]

Bump

[AmuroRay]

What's the full setup?

[Baker]

Originally Posted by AmuroRay

What's the full setup?

It’s square setup

[AmuroRay]

Originally Posted by Baker

It’s square setup

I meant Suspension.

[Baker]

Originally Posted by AmuroRay

I meant Suspension.

-3.5 front
-2 rear

[nweshner]

Do these require any fender modification to fit? Are there recommended camber minimums for these to fit?

[Baker]

Originally Posted by nweshner

Do these require any fender modification to fit? Are there recommended camber minimums for these to fit?

No fender modification required, recommend-3.5 front, -2 rear camber

[nweshner]

Originally Posted by Baker

No fender modification required, recommend-3.5 front, -2 rear camber

Any need for spacers front or rear? I currently have 18x8.5 et35 with 255/35 PS4S, Dinan lowering springs, and Vorshlag camber plates. -2.5° front, -2° rear no issues.

Compared to my existing wheel, this new wheel will have an inner rim which is 13.4mm closer to the suspension strut. The outer rim will poke out 0.6mm less than before.

[Baker]

Originally Posted by nweshner

Any need for spacers front or rear? I currently have 18x8.5 et35 with 255/35 PS4S, Dinan lowering springs, and Vorshlag camber plates. -2.5° front, -2° rear no issues.

Compared to my existing wheel, this new wheel will have an inner rim which is 13.4mm closer to the suspension strut. The outer rim will poke out 0.6mm less than before.

10mm front spacer, no rear spacer needed