[PurpleFunkMan]

Originally Posted by 2THIRTY5

lol, i've had both the A/S 3+ (225/40 on 8.5 and 245/35 on 9.5) and the PS4S (235/40 on 8.5 and 265/35 on 9.5).

At stock height, you should be fine running 235/40s on your 18x8.5 ET35. If you do lower the car however, I'm betting there'd be some mild rub as I had on dinan springs and 235/40s on 18x8.5 ET35 (ET45+10mm spacer). I eventually rolled my fenders which did help a bit, but then i kept getting more an more aggressive and got camber plates and settled at 235/40 ET25 and -2.2 camber. I was trying to fill out the fender which had a mild pull from the fender roll, but also wanted to push the limits of how far out i could push my wheel and tire without rubbing so that I could workout the sizing required for wider wheels and tires up front.

Now that I'm on Ohlins coilovers and Vorshlag camber plates, there's PLENTY of space now that the height has been raised to a finger gap all around and I'm pretty confident in getting a 18x9 ET32 (ET42+10mm) 255/35 or 18x9.5 ET28 (ET43+15mm) 265/35 up front.



You don't need camber plates to do 265/35 rears? unless I'm misreading that, for reference I've ran 18x9.5 ET48 (ET58+10mm) 265/35 on Dinan springs and had 0 issues.

Thanks for the info! I'm not going to lower it. I'm not sure if i need camber plates for the rears if i go 265s. Currently after as much of an alignment as i could get on stock, my fronts are at L -0.8 and R -1.1 and rears at L&R -1.8
I was really hoping not to have to do anything with plates or spacers though. Pain in the ass if you get a flat cause American Tire will not work on cars with them on. Any thoughts on running 265s in the rears without having spacers or plates?
If i run 235s up front and keep 255s rear, the rears are just gonna look even smaller LOL BTW, my rears are already ET58 Thanks for the help!!

[KennyFSU]

[4Hockey4]

Mostly stock for now....

[Maynard]

Thought I'd post this for #2000. Taken in Watkins Glen, staying in the 'Jackie Stewart' room prior to a HPDE.

[meppadua]

Prost

[Osageaj]

This is my first time posting however I have been using this forum before I bought the car (almost a year ago).

[khoa@x-ph.com]

Originally Posted by Osageaj

This is my first time posting however I have been using this forum before I bought the car (almost a year ago).

Welcome. Beautiful ride you got there buddy.

[SoThirsty]

[4Hockey4]

Went out and took a few pics with the new Titan ts5 wheels and PS4S. Tint next

[aftercorbu]

Originally Posted by 4Hockey4

Went out and took a few pics with the new Titan ts5 wheels and PS4S. Tint next

Looks great!

[elliswyatt]

Day of delivery plus an interior shot.

[4Hockey4]

nice, loving the manual. Always a huge fan of MG and light tan/oyster interior.

[meppadua]

Clutch

[SGHCU95]

Just brought her home

[meppadua]

2/21/21
Post Kar Meat Shenanigans

[jliuod]

Here is my 2021 M240i that I waited 3 long months for. 6sp manual, premium package, and moonroof.

All stock except for the 12mm wheel spacers on all 4 corners.

Not a DD, but more of a weekend car.

[TheyreMineralsMarie]

Just picked mine up last Monday. Here’s a cloudy day cell phone pic. Stock with coral interior

[HogFan760]

Almost a month into my ownership. I LOVE this car. The wheels are new as of yesterday. I bent 2 wheels with a HUGE pot hole and didn’t want factory so I got these (OZ Leggera HLT 18x8 45mm square. 225/40 and 245/35 staggered Michelin AS4).

[dsch01]

I've had the car a couple of years. The OEM "Flintstone" run-flats finally wore down so I bought some new shoes and installed Dinan springs.

Wheels: BC Forged KL01 in Brushed Gray
Front: 19x8.5 ET35 Michelin Pilot Sport 4S 225/35/19
Rear: 19x9.5 ET45 Michelin Pilot Sport 4S 255/30/19

[Ajowhan]

Coming from an Lexus is250, gotta say I love this car far far more.

[M2lci_]

Taken just after dawn

[HogFan760]

Freshly lowered on Dinan Springs.