[KAY-OS]

Anyone here running front 235/35 tires on 8.5J/19 ET35 with lowered suspensions? Any rubbing?
Thanks.

[mpbruin108]

Originally Posted by J-Sud

VMR V710 | Matte Black
(F) 18x8.5 ET35 | 225/40/18 Michelin PSS
(R) 18x9.5 ET45 | 255/35/18 Michelin PSS
Dinan springs w/bump stops and M3/M4 LCA
Need some minor fender rolling front and rear

Where did you get those side blade vinyl wrap? Mine wasn't as thick as yours for some reason and I couldn't figure out why.

[J-Sud]

Originally Posted by mpbruin108

Where did you get those side blade vinyl wrap? Mine wasn't as thick as yours for some reason and I couldn't figure out why.

Mine are just from Bmw - those actually came on the car when I got it. It may look different because I also have the M Performance side blades ? :

[acdapast]

Originally Posted by das_boost(F22)

Here is my BSM M235i with V810 in the factory gunmetal finish and staggered set-up.

(f) 18x8.5 et35
(r) 18x9.5 et45

No issues at all with stock fitment and looks great with the staggered set-up. Literally plug and play with stock M235i. The guys at VMR were awesome to work with and got my wheels to me very quickly.

Can you post more pictures? Particularly in daylight. Thanks!!!

[mibikin]

Does anyone have any pictures of the 18x8.5ET35 and 18x9.5ET45 from the direct back or top showing the amount of poke? I'm weighing a set of V810s vs a set of Apex ARC-8s and the offsets are so different that I'm concerned on how pokey the V810s may be.

[icycoldd]

How much of a rougher ride are 19s if seeking like-stock fitment? The roads down here aren't excellent.

[MartyMcFly88MPH]

Just made the switch. Only pic I've got so far.

[BradZditosky]

Originally Posted by VMRWheels

puckindnet's Mineral Grey 228i on Flow Form VMR V803

- Wheel Size/Offset
(F) VMR V803 19x8.5 ET35
(R) VMR V803 19x9.5 ET45

- Tire Size/Brand
(F) 235/30/19 Michelin PSS
(R) 255/30/19 Michelin PSS

- Suspension Setup
H&R Springs

- Camber/Alignment Specs
Not specified. Stock camber arms/plates

- Modifications to make fit (if necessary)
Minor rear fender roll

FULL PHOTO SET

I'v been searching for a good looking set of rims for a while now and I think i have finally found that ones I want, the 19" Staggered V803's but, just have a question

I have a 2015 M235i xDrive, not currently lowered but, I think, I want to eventually lower it on the Dinan springs. From what I have seen they lower the car about .5" all around compared to the H&R at an inch all the way around which I think is a little too much. With that said, do you still recommend going with the (F) 19x8.5 ET35 with 225/35/19 and (R) 19x9.5 ET45 with 255/30/19 or will that setup not work and what do you recommend?

[kohlzor]

Is anyone running 19" 710's with 235/265 on a stock 240? Will they most likely rub?

Cheers!

[Pnorth]

Originally Posted by KAY-OS

Anyone here running front 235/35 tires on 8.5J/19 ET35 with lowered suspensions? Any rubbing?
Thanks.

Yes, I do - up front with Michelin PS 4s. No rubbing for me on both original as well as coilovers at different lowered settings. We tested almost as low as when wheel can't be turned and then raised it back up to where we found the car had the best balance. In my world I still find it too harsh and going back to 18.

[knoteasy25]

Originally Posted by das_boost(F22)

Sorry for the very delayed response/iPhone photo, but here is another picture in the sunlight. I've had the wheels a few weeks now and have had no issues. They look great on the 2 series

Do these poke out past the rear fender on stuck suspension?

[malaki0612]

19x8.5 with 225/35/19 front (VMR710s, Matte Black)
19x9.5 with 255/30/19 rear, (VMR710s, Matte Black) with Pilot Supersport 4S on both front/rear

No other adjustments.

[M235SDCA]

Originally Posted by malaki0612

19x8.5 with 225/35/19 front (VMR710s, Matte Black)
19x9.5 with 255/30/19 rear, (VMR710s, Matte Black) with Pilot Supersport 4S on both front/rear

No other adjustments.

Those wheels look great on the black vert. That's with the stock springs?

[malaki0612]

Originally Posted by M235SDCA

Those wheels look great on the black vert. That's with the stock springs?

Thanks! I'm really happy with how they turned out - and yep, that is with the stock springs.

[VMRWheels]

Originally Posted by malaki0612

19x8.5 with 225/35/19 front (VMR710s, Matte Black)
19x9.5 with 255/30/19 rear, (VMR710s, Matte Black) with Pilot Supersport 4S on both front/rear

No other adjustments.

Looks great! Thanks for sharing!

[Boneman]

VMR 701 wheel

[Xiaoxi]

VMRWheels I'm ready to buy a set of 710's. What's the best avenue to make an order?

[AWF22]

Hey, everyone! New to the forum. Here are my V710s!

- 19x8.5 ET35 (front), 19x9.5 ET45 (rear)
- Hankook Ventus V12 Evo2: 225/35/19 (front), 255/30/19 (rear)
- Stock suspension
- No mods necessary

[WolfGTI]

VMR 810's here 18x8.5 et 35 in the front and 18x9.5 et45 in the rear on stock suspension. Currently on the factory supplied Michelin PSS.
I want to put some wider tires - anyone have any issues at the front with a 235/40 18?
At the rear I am going to run the 255/35 or 255/40.

[VMRWheels]

Originally Posted by WolfGTI

VMR 810's here 18x8.5 et 35 in the front and 18x9.5 et45 in the rear on stock suspension. Currently on the factory supplied Michelin PSS.
I want to put some wider tires - anyone have any issues at the front with a 235/40 18?
At the rear I am going to run the 255/35 or 255/40.

235 in front is going to be a little aggressive and could rub under certain driving conditions. In the rear, you'll want to stick with the 255/35 as the 40 profile will cause all sorts or rubbing.

[VMRWheels]

Originally Posted by AWF22

Hey, everyone! New to the forum. Here are my V710s!

- 19x8.5 ET35 (front), 19x9.5 ET45 (rear)
- Hankook Ventus V12 Evo2: 225/35/19 (front), 255/30/19 (rear)
- Stock suspension
- No mods necessary

Welcome to the forums! Thanks for sharing your pics!

[supsup]

Originally Posted by Boneman

VMR 701 wheel

Wish they made a open lug version of these wheels with no cap.