[M8fam]

I purchased a JL Audio 10W3V3 sub, XD600/1v2 amp and a technic add a sub harness.

I am awaiting for my custom enclosure from visual ice. Are there any good, simple install videos or guides for such a setup? I didn’t find anything good on YouTube.

[O Stater]

Originally Posted by M8fam

I purchased a JL Audio 10W3V3 sub, XD600/1v2 amp and a technic add a sub harness.

I am awaiting for my custom enclosure from visual ice. Are there any good, simple install videos or guides for such a setup? I didn’t find anything good on YouTube.

Make sure you tell him exactly what internal volume you need for that sub. I ordered one from him for my 12W3v3 and he made it with only .8 cuft not 1.25 needed. I had to cut it apart and spend 2.5 weeks rebuilding it to the correct size.
I couldn't find any videos either, maybe I should make one and upload it going over how I set mine up. However, if you are just adding the sub, the harness just connects between the factory amp and factory harness providing signal to the sub amp. from there you just need to determine where to put your amp, wire it up and then set the gains. There are a lot of videos on how to properly set up the gains so you should be able to do that fairly easily.

[audiovert]

https://share.icloud.com/photos/06d3...qEpzVKggnAsmHQ