19 inch rims to Bmw M235I?

tennisfreak · 06-14-2018, 08:06 AM

Nice thread, will use when I get my 19's

714_2er · 06-15-2018, 12:53 AM

VMR 702 Gunmetal w/brushed face
19x8.5 et35
19x9.5 et45

Goodyear Eagle F1 Asymmetric
225/35 Front
255/30 Rear

H&R sport springs (1” drop)
No rubbing

hipopkboy · 03-24-2019, 02:03 AM

whats the best spec/offsets to run VMR V801 on F22 M235i platform in 19s?

j2dad5389 · 02-15-2020, 11:29 AM

Sorry to revive an old thread but does anyone know if I can run this set up without rubbing or any issues? On stock suspension

19x9.5 ET 35 255/35r19
19x8.5 ET 30 245/35r19

Mark.h · 05-23-2020, 11:07 PM

Quote:

Originally Posted by Yabba

Quote:

Originally Posted by j2dad5389

Sorry to revive an old thread but does anyone know if I can run this set up without rubbing or any issues? On stock suspension

19x9.5 ET 35 255/35r19
19x8.5 ET 30 245/35r19

Running F19x8.5 ET 35 245/35r19
R19x9 ET 48 265/35r19

No suspension or fender mods running mps4s which run wider without spacers with no rub whatsoever driving on track or road.Perfect stance also

Any chance you have pictures of your set up? Mainly interested in your front set up as I have 19x8.5 +35 but most wheel companies recommended a tire size of 235/35/19 for safe fitment.

Mark.h · 06-07-2020, 07:22 PM

Quote:

Originally Posted by Yabba

I believe the wheel was slightly turned to the right in these shots but it's close enough to being completely flush and no rubs under any situation as is. Steering feels a lot heavier at lower speeds and closer to how i like it at faster speeds.
Wouldn't go for anything lower than 35 for ride quality. Hope that covers mostly everything

Thanks for your response. Any side shots? Or just a guess on how much wheel gap you have in the front? Thanks again.

Mark.h · 06-23-2020, 08:34 PM

19x8.5 +35 square set up from variant alloys. 245/35/19 tires. Stock suspension no modifications to fenders or camber.

TheSniper · 07-14-2020, 05:48 PM

I have a set of BC Forged wheels ordered. Should be ready in another week or two.

I went with a square set up, 19x8.5 +38.

I have the Dinan suspension package installed (lowering springs, front + rear sway bars, bump stops).

Haven't decided on tires yet. Anyone have any idea on what size tires I should run with. And any recommendations on type of tires?

Car is an xDrive.

Thanks guys!

TheSniper · 07-14-2020, 05:52 PM

These are the rims I ordered.

Mark.h · 07-14-2020, 08:24 PM

Quote:

Originally Posted by TheSniper

I have a set of BC Forged wheels ordered. Should be ready in another week or two.

I went with a square set up, 19x8.5 +38.

I have the Dinan suspension package installed (lowering springs, front + rear sway bars, bump stops).

Haven't decided on tires yet. Anyone have any idea on what size tires I should run with. And any recommendations on type of tires?

Car is an xDrive.

Thanks guys!

Any camber adjustment? 235/35/19 is probably the widest/tallest you can run with being lowered a little bit with the Dinan springs. 225/35 would be a safe bet but that's pretty thin for a 8.5" wheel in my opinion.

TheSniper · 07-15-2020, 07:35 AM

Quote:

Originally Posted by Mark.h

Any camber adjustment? 235/35/19 is probably the widest/tallest you can run with being lowered a little bit with the Dinan springs. 225/35 would be a safe bet but that's pretty thin for a 8.5" wheel in my opinion.

No camber adjustment. I can have it done if need be.

Yeah, I'd like to go with the 235/35/19 if I can.

This is my first set of rims, who knew it could be so complicated lol. It took me forever to decide on a set and then researching all the sizing/fitment and everything.

BrettKA7 · 07-15-2020, 08:36 AM

Just installed Alzor 030 18x8 ET35 yesterday.

Rear pokes a tad but otherwise they are perfect. Finish is beautiful even to a scrutinizing eye. Cast aluminum had no notable defects. No chips or scratches upon receipt.

TheSniper · 07-15-2020, 01:41 PM

Very nice!!!

F22SANTI · 08-29-2020, 04:48 PM

Quote:

Originally Posted by BrettKA7

Just installed Alzor 030 18x8 ET35 yesterday.

Rear pokes a tad but otherwise they are perfect. Finish is beautiful even to a scrutinizing eye. Cast aluminum had no notable defects. No chips or scratches upon receipt.

What tire specs did you go with?

BrettKA7 · 08-29-2020, 05:52 PM

Quote:

Originally Posted by F22SANTI

Quote:

Originally Posted by BrettKA7

Just installed Alzor 030 18x8 ET35 yesterday.

Rear pokes a tad but otherwise they are perfect. Finish is beautiful even to a scrutinizing eye. Cast aluminum had no notable defects. No chips or scratches upon receipt.

What tire specs did you go with?

I kept OEM 225/245 staggered tire sizing

Bibopp · 08-31-2020, 07:58 AM

Hi guys,

planing to install a 19x9 ET45 set at the rear, i would like to know if i would be without rub with the MPS4S 265/30/19 ? I'm on stock springs but will maybe go for the H&R -15mm springs in future.

Thank you !

oremag2014 · 07-22-2023, 08:33 AM

I,m also rocking 19's on H&R springs

06-14-2018, 08:06 AM	#23
tennisfreak Second Lieutenant 201 Rep 296 Posts Drives: M240i Join Date: Feb 2018 Location: DFW iTrader: (0)	Nice thread, will use when I get my 19's
	Appreciate 0 Quote

06-15-2018, 12:53 AM	#24
714_2er Lieutenant 108 Rep 487 Posts Drives: 2015 AW M235i Join Date: Jun 2013 Location: SoulCal, 714 iTrader: (0)	VMR 702 Gunmetal w/brushed face 19x8.5 et35 19x9.5 et45 Goodyear Eagle F1 Asymmetric 225/35 Front 255/30 Rear H&R sport springs (1” drop) No rubbing Attached Images Last edited by 714_2er; 06-20-2018 at 02:01 AM..
	Appreciate 2 cdn240cab38.00 VMRWheels2038.00 Quote

03-24-2019, 02:03 AM	#25
hipopkboy Registered 2 Rep 3 Posts Drives: STI,S2000,IS350,M235I? Join Date: Mar 2019 Location: CA iTrader: (0)	whats the best spec/offsets to run VMR V801 on F22 M235i platform in 19s?
	Appreciate 0 Quote

02-15-2020, 11:29 AM	#26
j2dad5389 Lieutenant 372 Rep 561 Posts Drives: 2020 M340i Join Date: Jul 2019 Location: Austin, TX iTrader: (0)	Sorry to revive an old thread but does anyone know if I can run this set up without rubbing or any issues? On stock suspension 19x9.5 ET 35 255/35r19 19x8.5 ET 30 245/35r19
	Appreciate 0 Quote

06-23-2020, 08:34 PM	#29
Mark.h Private 20 Rep 74 Posts Drives: 2015 bmw m235i Join Date: Jul 2019 Location: San Diego iTrader: (0)	19x8.5 +35 square set up from variant alloys. 245/35/19 tires. Stock suspension no modifications to fenders or camber. Attached Images
	Appreciate 0 Quote

07-14-2020, 05:48 PM	#30
TheSniper Private 26 Rep 74 Posts Drives: M235i xDrive Join Date: Oct 2019 Location: Detroit iTrader: (0)	I have a set of BC Forged wheels ordered. Should be ready in another week or two. I went with a square set up, 19x8.5 +38. I have the Dinan suspension package installed (lowering springs, front + rear sway bars, bump stops). Haven't decided on tires yet. Anyone have any idea on what size tires I should run with. And any recommendations on type of tires? Car is an xDrive. Thanks guys! __________________ 2016 M235i xDrive Dinan Stage 4 Tune (Big turbo, exhaust, intercooler, etc) Dinan lowering springs, bump stops, front and rear sway bars.
	Appreciate 0 Quote

07-14-2020, 05:52 PM	#31
TheSniper Private 26 Rep 74 Posts Drives: M235i xDrive Join Date: Oct 2019 Location: Detroit iTrader: (0)	These are the rims I ordered. Attached Images __________________ 2016 M235i xDrive Dinan Stage 4 Tune (Big turbo, exhaust, intercooler, etc) Dinan lowering springs, bump stops, front and rear sway bars.
	Appreciate 0 Quote

07-15-2020, 08:36 AM	#34
BrettKA7 Captain 567 Rep 776 Posts Drives: F22 M240i Join Date: Jun 2017 Location: Huntington Beach iTrader: (0)	Just installed Alzor 030 18x8 ET35 yesterday. Rear pokes a tad but otherwise they are perfect. Finish is beautiful even to a scrutinizing eye. Cast aluminum had no notable defects. No chips or scratches upon receipt. Attached Images __________________ M240i \| Mineral White \| Coral Red
	Appreciate 1 TheSniper25.50 Quote

07-15-2020, 01:41 PM	#35
TheSniper Private 26 Rep 74 Posts Drives: M235i xDrive Join Date: Oct 2019 Location: Detroit iTrader: (0)	Very nice!!! __________________ 2016 M235i xDrive Dinan Stage 4 Tune (Big turbo, exhaust, intercooler, etc) Dinan lowering springs, bump stops, front and rear sway bars.
	Appreciate 0 Quote

08-31-2020, 07:58 AM	#38
Bibopp Private First Class 52 Rep 109 Posts Drives: BMW M235i Join Date: Dec 2017 Location: France iTrader: (0)	Hi guys, planing to install a 19x9 ET45 set at the rear, i would like to know if i would be without rub with the MPS4S 265/30/19 ? I'm on stock springs but will maybe go for the H&R -15mm springs in future. Thank you !
	Appreciate 0 Quote

07-22-2023, 08:33 AM	#39
oremag2014 Private 32 Rep 64 Posts Drives: BMW 220i Join Date: May 2023 Location: Panama iTrader: (0)	I,m also rocking 19's on H&R springs
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search