[pikcachu]

Originally Posted by MikeDee

One more question, is there a code to have the climate control remember last setting?

I turn it off... I want it to stay off...

AC fan always off on startup Default IHKA 3003 MEMORY_OFF nitch_activ

Comment = The OFF state is stored only within the follow-up time (15 minutes after terminal 15 off).

[Will_f1]

Hello,
My new AUS - F22 just arrived and I've been driving it a week.
Hoping to get codes to enable BMW Apps when driving...would the video in motion codes achieve this?

[pikcachu]

which apps don't work while driving ?

ah looks like it must be a non-US thing...

If you send me you HU_NBT cafd I can do a compare and see if I can find the difference

[Will_f1]

Originally Posted by pikcachu

which apps don't work while driving ?

ah looks like it must be a non-US thing...

If you send me you HU_NBT cafd I can do a compare and see if I can find the difference

All of them, yep Australian model, apparently something to do with ADR (Australian Design Rules).
I'm just ordering some equipment so I'll export the Hu_NBT cafd when it's in.

[Ruhnie]

There are a ridiculous amount of cables available on ebay it seems. Is there a vendor or brand that seems to be regarded as the gold standard around here? Or are they all pretty much the same? Thanks.

[pikcachu]

Originally Posted by Ruhnie

There are a ridiculous amount of cables available on ebay it seems. Is there a vendor or brand that seems to be regarded as the gold standard around here? Or are they all pretty much the same? Thanks.

I would try this one http://www.ebay.com/itm/OBD2-ENET-Et...135320&vxp=mtr

it's in the us

[Anchored]

That's who I bought mine from. have had very good success and they warranty their cord!

[Ruhnie]

Originally Posted by pikcachu

I would try this one http://www.ebay.com/itm/OBD2-ENET-Et...135320&vxp=mtr

it's in the us

Originally Posted by Anchored

That's who I bought mine from. have had very good success and they warranty their cord!

Thanks guys, going to grab that one then. Much appreciated!

[TurboKoo]

Hey pikcachu
Is there a way to change scale in sport display?

[shawnsheridan]

Originally Posted by TurboKoo

Hey pikcachu
Is there a way to change scale in sport display?

Not without Flashing DME with new firmware.

[TurboKoo]

Originally Posted by shawnsheridan

Not without Flashing DME with new firmware.

Ok, thanks for the info and big thanks to your help with files.

Today I've coded:

Speed to BC
GPS sync
Sport displays
Temperature to BC
Brighter halos
temperature to tyres
Radio/navi off when door opens
corner lights
complete text/email messages while driving
Own ringtone

[TurboKoo]

Question to shawnsheridan or pikcachu

Is it possible to activate speed limit info without having camera in rear view mirror? Ie. only using the information from navigation?

[OpenAir]

Originally Posted by TurboKoo

Question to shawnsheridan or pikcachu

Is it possible to activate speed limit info without having camera in rear view mirror? Ie. only using the information from navigation?

This has been covered and the answer is no, wish we could...

[Feco]

Hey Guys, I need some help because I did something very wrong

I Clicked on "Code" Button in any ECU, it overwrite the changes I had made, and this 2 errors showed up on iDrive:






The car is running ok, cant feel any diference at all..

[ocN55]

Originally Posted by pikcachu

Note
The engine is not switched off automatically in
the following situations:

▷ External temperature too low.
▷ The external temperature is high and automatic
climate control is running.
▷ The passenger compartment has not yet
been heated or cooled to the required
level.
▷ The engine is not yet at operating temperature.
▷ The wheels are at a sharp angle or the
steering wheel is being turned.
▷ After driving in reverse.
▷ Fogging of the windows when the automatic
climate control is switched on.
▷ Vehicle battery is heavily discharged.
▷ The engine compartment lid is unlocked.
▷ The parking assistant is activated.
▷ Stop-and-go traffic.
▷ The transmission selector lever is in position
N or M/S.
▷ Use of fuel with high ethanol content.

Sorry for bumping this old post but for some reason my Auto Start Stop feature still hasn't been working even though I'm on pump gas and not ethanol. Pretty stumped as to what condition isn't being met. Could it be because my car is running too hot? I would hope I get a drivetrain malfunction light if something like coolant temp was too hot.

[pikcachu]

Originally Posted by ocN55

Sorry for bumping this old post but for some reason my Auto Start Stop feature still hasn't been working even though I'm on pump gas and not ethanol. Pretty stumped as to what condition isn't being met. Could it be because my car is running too hot? I would hope I get a drivetrain malfunction light if something like coolant temp was too hot.

I don't think so... that's not a condition for the ASS not to work...

[ggabriele3]

I'm about to take a shot at this. Two questions:

(1) If I screw everything up, is there a way to go back to factory for my car? Save original settings and restore?

(2) I have the base/hifi sound system, no Nav (small display), no tech pkg. Is video in motion over USB possible?

[shawnsheridan]

Originally Posted by ggabriele3

I'm about to take a shot at this. Two questions:

(1) If I screw everything up, is there a way to go back to factory for my car? Save original settings and restore?

(2) I have the base/hifi sound system, no Nav (small display), no tech pkg. Is video in motion over USB possible?

1) Backup not necessary. Just VO Code ECU to reset it.

2) Not possible.

[isthar]

Hey fellas -- thoughts on being able to get bmw apps not to force read-aloud mode while driving? Specifically, you load BMW Online, News app... if moving they hide the text and you must use the read-aloud feature. Any coding that can disable that?

[jrstech]

Originally Posted by shawnsheridan

The only way to loose coding is if car is programmed by dealer. When this occurs, ECU gets new CAFD, and I would not take backed up data from old CAFD "A" and try to restore it to new CAFD "B" as the two may not align.

So the dealer reprogrammed my car and all CAFD's are back to stock. Hard to get used to everything back to stock! I made backups of CAFD's after each item was coded back in 4/2014. It sounds like the recommended procedure is to re-code each item rather than restore the CAFD's?

[shawnsheridan]

Originally Posted by jrstech

So the dealer reprogrammed my car and all CAFD's are back to stock. Hard to get used to everything back to stock! I made backups of CAFD's after each item was coded back in 4/2014. It sounds like the recommended procedure is to re-code each item rather than restore the CAFD's?

Yes.

[jrstech]

Originally Posted by shawnsheridan

Yes.

Thanks, I was afraid of that. Can I still use the PSdZdata (V52.1+) software from back then?