[SlowM240i]

So I'm pulling the trigger on some coilovers pretty soon. If I code out my edc would I still be able to use comfort, sport and sport + for throttle transmission and steering feel? Just not dampening
I've been looking everywhere thanks

[pikcachu]

Originally Posted by SlowM240i

So I'm pulling the trigger on some coilovers pretty soon. If I code out my edc would I still be able to use comfort, sport and sport + for throttle transmission and steering feel? Just not dampening
I've been looking everywhere thanks

yes

[SlowM240i]

That was quick lol appreciate that didn't want to spend 4000 on the plug and play coils

[x233]

pikcachu, do you think, or do you know, if coding out would leave the variable sport steering function intact?

[pikcachu]

Originally Posted by x233

pikcachu, do you think, or do you know, if coding out would leave the variable sport steering function intact?

It should, it's like the M2 where the suspension is not adaptive but everything else is the same, throttle, steering, modes etc.


Remove 2VF from FA/VO and then VO Code the DSC, KOMBI, ICM, and HU_NBT

http://f80.bimmerpost.com/forums/sho....php?t=1163342

[x233]

Originally Posted by pikcachu

It should, it's like the M2 where the suspension is not adaptive but everything else is the same, throttle, steering, modes etc.


Remove 2VF from FA/VO and then VO Code the DSC, KOMBI, ICM, and HU_NBT

http://f80.bimmerpost.com/forums/sho....php?t=1163342

Thanks.

[SlowM240i]

I've also read that once I code it I can't let the dealer update anything? Is this true?

[pikcachu]

Originally Posted by SlowM240i

I've also read that once I code it I can't let the dealer update anything? Is this true?

Well you might have to re-code it if they flash your car or alternative you can write the change to the FA so even if they flash the car it should flash with the updated FA and keep the disabled adaptive suspension

[TwistedX]

Thread revival, I did the coding but looked at the F80 post and they say you have to unplug the EDC module in the trunk. Where is it and what does it look like?

[tyler.genter]

I just did it today actually and it will allow you to use all functions if you code it out. Keep in mind depending on how low you go you may feel a little more rear body roll, then expected.

[SP_F80M3]

Originally Posted by tyler.genter

I just did it today actually and it will allow you to use all functions if you code it out. Keep in mind depending on how low you go you may feel a little more rear body roll, then expected.

Do you mind posting up the steps on how to code it out? And if we really have to unplug the EDC in the trunk?

[EVEda235i]

Originally Posted by MineralM235i

Do you mind posting up the steps on how to code it out? And if we really have to unplug the EDC in the trunk?

Originally Posted by MineralM235i

Do you mind posting up the steps on how to code it out? And if we really have to unplug the EDC in the trunk?

+1 I'm stuck after deleting 2VF. Can't seem to find the kombi, edc, etc to V0 code them

[pikcachu]

Originally Posted by garciacarlosernesto

+1 I'm stuck after deleting 2VF. Can't seem to find the kombi, edc, etc to V0 code them

How to VO code

Connect => Read FA => Activate FA => Read SVT (VCM) => Right-Click on ECU you want to code i.e. HU_NBT (the ECU itself not the underlying CAFD) => Select CODE.

Step by step VO code guide sample for TPMS decoding https://www.2addicts.com/forums/atta...9&d=1454548372

[EVEda235i]

Originally Posted by pikcachu

How to VO code

Connect => Read FA => Activate FA => Read SVT (VCM) => Right-Click on ECU you want to code i.e. HU_NBT (the ECU itself not the underlying CAFD) => Select CODE.

Step by step VO code guide sample for TPMS decoding https://www.2addicts.com/forums/atta...8;d=1454548372

Originally Posted by pikcachu

How to VO code

Connect => Read FA => Activate FA => Read SVT (VCM) => Right-Click on ECU you want to code i.e. HU_NBT (the ECU itself not the underlying CAFD) => Select CODE.

Step by step VO code guide sample for TPMS decoding https://www.2addicts.com/forums/atta...8;d=1454548372

FINALLY got it! So nice to have all the modes back again. Thanks pikcachu

[pikcachu]

Originally Posted by garciacarlosernesto

FINALLY got it! So nice to have all the modes back again. Thanks pikcachu

[tyler.genter]

Originally Posted by MineralM235i

Do you mind posting up the steps on how to code it out? And if we really have to unplug the EDC in the trunk?

Yo my bad bro I never actually get on this thing but the link that the other guy applied is definitely the way to go. To be honest I had a local shop do mine's.

[Jamesjedi]

Old thread, I know

Can the code be easily revered?

"Well you might have to re-code it if they flash your car or alternative you can write the change to the FA so even if they flash the car it should flash with the updated FA and keep the disabled adaptive suspension"

Is this a simple thing to do? I honestly have know idea.

[pikcachu]

Originally Posted by Jamesjedi

Old thread, I know

Can the code be easily revered?

"Well you might have to re-code it if they flash your car or alternative you can write the change to the FA so even if they flash the car it should flash with the updated FA and keep the disabled adaptive suspension"

Is this a simple thing to do? I honestly have know idea.

writing the FA probably takes 30 secs or so...

[Jamesjedi]

Originally Posted by pikcachu

writing the FA probably takes 30 secs or so...

Thanks for the reply!

[Jamesjedi]

To be clear on this subject: I can order coilovers that are not designed for EDC ?

It sounds like it may be more desirable to not get EDC hardware and use coding with suspension not designed for EDC?

Bilstein PSS10 come in EDC and non EDC.