[GetYourWheels]

F141s with Brushed centers and Polished Liquid Bronze Lips!

[Uponone76]

Originally Posted by GetYourWheels

We had the chance to test fit some wheels on a 228 last week, and wanted to share the photos!

From our measurements we found that a a 8.5" +40 works perfectly on the car.
Although anything from a +38-43 will work as well.
The car can fit staggered sizes, and a 9.5 +43-48 will all work with the right tires.

18x8.5 +35 M359s test fitted on the front, these wheels flow very well with the look of the car. Very clean setup.

Jason, I thought I was told these wheels would not fit?

[ska///235i]

Doesnt look like that car had the msport brakes??

[GetYourWheels]

Pretty excited to share these:
The first set of M550s in a brushed finish!
Bespoke 3 Brushed Gloss Antique Copper

The brushed really works amazingly well on this wheel as the entire barrel is exposed so you can really see the brushing!
The result is really impressive, I'm surprised this is the first time this has been done






I will have photos of these installed on an IS F-Sport tomorrow!

[Uponone76]

Originally Posted by ska///235i

Doesnt look like that car had the msport brakes??

Is this why Jason?

[GetYourWheels]

Here are a set of F230 and F141 in AG's new Bespoke 3 Polished Grigio!

[GetYourWheels]

Here is a set of 19x9.5 +42 Fondmetal 9RRs in their Gloss Titanium finish!
Set is going out to a E63 AMG





Here are the very first sets of Bespoke 3 Brushed Polish on AG's M series line!

20" M580s for a Tesla Model S
21x10.5" M590 All around for a F10 M5!
Finish is Bespoke 3 Brushed Polished - Brushed faces, polished windows, and brushed barrels!

[GetYourWheels]

M6 on 21x9 21x10.5 Matte Black M510s

[GetYourWheels]

Originally Posted by Uponone76

Jason, I thought I was told these wheels would not fit?

Originally Posted by ska///235i

Doesnt look like that car had the msport brakes??

Originally Posted by Uponone76

Is this why Jason?

Hey, sorry didnt see these questions.

Most likely when you contacted me it was before we had measured the 2 series so we assumed it ran the same fitment as the 1 series.
After measuring we saw this wasn't exactly the case and the 2 can run a very slightly lower offset than the 1.

I will send you a PM!

[GetYourWheels]

Install for Ferrari 360 on the 19x8.5F 20x10R Ruger Split Matte Gold we did last week:




And a photoshoot from a customer's 360 on AG F210s!

[GetYourWheels]

Heres a set of 20x10.5 Verde V99s going out to a A5

I was impressed by how good they looked.

They have a nice metallic graphite finish, and the barrel uses the Vossen style, so they look huge.



Overall a great looking wheel for the price!

[GetYourWheels]

Jeremy's RS4 on M580 Brushed Stainless:






Bagged 350Z on AG F430s dropped by!





Another new AG Directional style!

From top going clockwise: Design 11, Design 21, and Design 31

F121:



F131


F111

[GetYourWheels]

Heres a finish thats not for everyone, but I think its one of the most stunning finishes yet!

M510 in Bespoke 3 Brushed Candy Red
20x10s all around going out to a G37



The red really shows off the brushing unlike any other color I've seen so far!

[GetYourWheels]

Heres a set of M510s in Bespoke 3 Brushed Matte Clear



Great looking finish!



Forgestars finally came back in stock this week...

Backorders are being fulfilled, thanks for the patience all!

[GetYourWheels]

This beast dropped by the warehouse this week for some Forgiatos!

355/25/21 rear tires!

Before:


After:

[GetYourWheels]

Many have been asking for completed photos of the new Alpha Forged wheel, well the first photos are finally available!

Centers have brushed faces and polished windows, with a matte dark tinted (DDT) powdercoat over it!
Also shown is the Titanium hardware which is a standard feature!





Some asked for photos of the back of the wheel, so here it is:

You can see the pocketing on the back to shave off as much weight as possible
This center weighs only about 7.8 pounds!

Some additional info on the Titanium Hardware that comes standard with Alpha Forged:

Weight of the normal steel bolt and nut: 0.8 OZ


Weight for the Titanium bolt and nut: 0.4 OZ


Thats half the weight!

Multiply that by 40 bolts = 16 oz
Thats a savings of 1 lb per wheel, not the biggest difference, but all the weight savings is around the edge which is more beneficial than weight saved towards the center.

We are still looking for partial sponsorship cars to run these, so contact me sponsorship information!

[GetYourWheels]

Heres a set of CE28Ns we completely refinished with Matte Bronze centers and Gloss Bronze Lips!

[GetYourWheels]

19x9 19x12 F310s in Matte Gunmetal for Vincent's R8!



19" SDC Forgestar F14s in Textured Black for a 370Z vs 21x10.5 M590s in Bespoke 1 Matte Black for a Cayenne

[GetYourWheels]

Some customer install photos today!

Vossen VFS-1s in 20x9 20x10.5 on a GS350



19" Fondmetal 9RRs in Titanium on an E63



20x10 M590s on a B8 S4

[GetYourWheels]

Heres examples of two different gold powdercoats we offer:


M510s Bespoke 2 Gloss Candy Gold - Metallic Silver Basecoat w/ Candy Gold Topcoat


M580s Bespoke 1 Gloss Metallic Gold

[GetYourWheels]

Here are some 20" Vossen CV4s in Matte Graphite!



I think these would be my favorite style from Vossen right now, you dont see them as often though.

Heres a photo to show concavity!

[GetYourWheels]

Heres a set of Forgestar CF5V in Bronze Burst for a 370Z, those are beefy 305/30 Michelin PSS for the rears!


Black Graphite Forgestar F14s in 20x9 20x9.5 for a Tesla Model S
Before Tires:


Mounted and Balanced with Hankook V12 Tires:



Set of 18x9.5 +40 TSW Nurburgrings in Matte Gunmetal with 255/40/18 Michelin PSS tires for a S4 track setup!





Finally, believe it or not Jeremy came by again yesterday for yet another set of wheels!
This time 20x10 M580s in Brushed Candy Red, insane!
Heres a teaser, more to come next week!


Now theres a color combo you probably haven't seen before!