[pousa13]

Originally Posted by 4GCRacer

I have ID5 with latest software. I already have Bimmercode App and have done expert mode programming. Is there some other activation code I need, FSC?

Andy

on a sidenote:
you can easily code your ID5 to have the updated ID6 live view - that's just a conding thing

[4GCRacer]

Originally Posted by pousa13

on a sidenote:
you can easily code your ID5 to have the updated ID6 live view - that's just a conding thing

Is this the miracast feature or something else? I have coded that to be functional only to find out my phone (Pixel) only supports ChromeCast. I was looking to do Apply Carplay for my wife's phone when we travel together or she drives the M240i.

Andy

[Almaretto]

Originally Posted by 4GCRacer

Is this the miracast feature or something else? I have coded that to be functional only to find out my phone (Pixel) only supports ChromeCast. I was looking to do Apply Carplay for my wife's phone when we travel together or she drives the M240i.

Andy

No, it is just a different skin for ID5. You can animated horizontal tiles.

Carplay does not support mirroring.

[ZPrime]

I tried to search this thread but don't know the correct terms to use...

I'm running E-SYS 3.28.1 with Launcher 2.71.135.
Car is a 2018 M2 (F87).

I read the FA and the SVT from the Coding screen, and then read the NCD files. I then disconnected from the car, and made duplicate copies of all of the above.

I now want to go in and edit the NCD to make some changes (went back in the house to look up exactly what I wanted to do, planned to make the changes in the house then go back to the car to write them in).

I load up the FA and SVT files, go to an ECU I want to edit, right click the CAFD section, choose "New > FDL" and load in the correct NCD file. (All of this is working as expected and matches what I see in the video in the first post.)

I then right click the FDL/CAFD entry and choose Edit FDL, which kicks me over to the edit screen... but all of the individual entries there have no descriptions. So looking at FEM_BODY, have the FDL open in E-Sys, and the screen has bunches of periods / dots where I would normally expect a description to be.

Is this normal? Doesn't seem like it based on the intro video... See the screenshot below/attached.

[Almaretto]

Originally Posted by ZPrime

Is this normal? Doesn't seem like it based on the intro video... See the screenshot below/attached.

Normal if you configured Launcher incorrectly. Select F87

[4GCRacer]

Originally Posted by Almaretto

No, it is just a different skin for ID5. You can animated horizontal tiles.

Carplay does not support mirroring.

What are the codes for the ID6 Skin or is it something that has to be added?

Andy

[Almaretto]

Originally Posted by 4GCRacer

What are the codes for the ID6 Skin or is it something that has to be added?

Andy

HMI_ID_VERSION: id6_light

[hoyasaxa]

Two things:

1) can someone please PM me the link to the most up to date software for my car - 2018 M2. I think I need both the large file with the car software and the actual program.

2) Is it possible to code service related items? My car had the break in service on ED but it’s never been coded. So launch control doesn’t work and the car keeps pestering me to take it in. I don’t really want to because it’s an invitation for someone to joyride my car “per customer request” to see if LC works.

[Almaretto]

Originally Posted by hoyasaxa

Two things:

1) can someone please PM me the link to the most up to date software for my car - 2018 M2. I think I need both the large file with the car software and the actual program.

2) Is it possible to code service related items? My car had the break in service on ED but it’s never been coded. So launch control doesn’t work and the car keeps pestering me to take it in. I don’t really want to because it’s an invitation for someone to joyride my car “per customer request” to see if LC works.

Fxx-/Ixx-/Gxx-series Coding: (No Request) Latest Software Links

80GB PSdZ Full only needed if you plan to program. 2.5GB lite is more than adequate for coding.

Service does not require coding. You can reset using hidden cluster menu.

[hoyasaxa]

Originally Posted by Almaretto

Fxx-/Ixx-/Gxx-series Coding: (No Request) Latest Software Links

80GB PSdZ Full only needed if you plan to program. 2.5GB lite is more than adequate for coding.

Service does not require coding. You can reset using hidden cluster menu.

Resetting simply says I've got 1200 miles before break-in. Over and over again. Something has to be coded on M cars.

Thanks for info on lite

[Almaretto]

Originally Posted by hoyasaxa

Resetting simply says I've got 1200 miles before break-in. Over and over again. Something has to be coded on M cars.

Thanks for info on lite

Goodluck. Coding can change intervals but never seen it reset counts.

[ZPrime]

Originally Posted by Almaretto

Normal if you configured Launcher incorrectly. Select F87

I did select F87 from the launcher, it's been the only thing I've ever had selected (I'm posting over here because there are so few M2s but I know to choose the correct model code for my car ). When I took the laptop back out to the car and used it while connected, everything was showing up correctly. Maybe I need a newer version of launcher or should be using an older version of E-SYS?

I was able to enable european parking light feature (yay!), but couldn't get the comfort turn-signal setting up to my desired 5 repeats. "werte=4" was setting, but when I Coded it, it didn't seem to function correctly.

[ZPrime]

Originally Posted by hoyasaxa

Resetting simply says I've got 1200 miles before break-in. Over and over again. Something has to be coded on M cars.

Thanks for info on lite

Pretty sure there is some process they run through to change it over to the normal service intervals and enable LC. Guessing you could do it with Rheingold (ISTA+), don't know if that's something that E-Sys can do though...

[Almaretto]

Originally Posted by ZPrime

I did select F87 from the launcher, it's been the only thing I've ever had selected (I'm posting over here because there are so few M2s but I know to choose the correct model code for my car ). When I took the laptop back out to the car and used it while connected, everything was showing up correctly. Maybe I need a newer version of launcher or should be using an older version of E-SYS?

I was able to enable european parking light feature (yay!), but couldn't get the comfort turn-signal setting up to my desired 5 repeats. "werte=4" was setting, but when I Coded it, it didn't seem to function correctly.

Sometimes that is a memory issue. You do not need older E-sys. Latest launcher is 2.7.1.

Turn signal changes does not work since 3.61 firmware.

[hoyasaxa]

Originally Posted by Almaretto

Sometimes that is a memory issue. You do not need older E-sys. Latest launcher is 2.7.1.

Turn signal changes does not work since 3.61 firmware.

Wait, what? Which is it -- are you saying he just needs to try again, or are you saying BMW updated the firmware in the car and that the number of blinks from a soft-touch on the stalk can no longer be changed?

[hoyasaxa]

Originally Posted by Almaretto

Goodluck. Coding can change intervals but never seen it reset counts.

Turns out LC is activated, but the service itself still shows. So the service needs to be deleted or checked off somehow. <shrug> I'll just keep resetting it until I take it in for the next normal service.

[ZPrime]

Originally Posted by hoyasaxa

Wait, what? Which is it -- are you saying he just needs to try again, or are you saying BMW updated the firmware in the car and that the number of blinks from a soft-touch on the stalk can no longer be changed?

The error I was having with not-displaying descriptions for items inside esys is a memory issue, is what he's saying. I don't understand why; I'm running on a Surface Book (Win10 v1709) with 8GB of RAM and nothing else running. Would Launcher Pro be helpful? ISTR it has an extra option to enable more RAM to be used?

Turn signals apparently just can't be changed on newer cars (with newer firmware). I can do 1 blink or 3 and that's it.

[hoyasaxa]

Originally Posted by ZPrime

Turn signals apparently just can't be changed on newer cars (with newer firmware). I can do 1 blink or 3 and that's it.

That's shitty. It's basically one of my favorite things to code.

[Almaretto]

Originally Posted by ZPrime

The error I was having with not-displaying descriptions for items inside esys is a memory issue, is what he's saying. I don't understand why; I'm running on a Surface Book (Win10 v1709) with 8GB of RAM and nothing else running. Would Launcher Pro be helpful? ISTR it has an extra option to enable more RAM to be used?

Turn signals apparently just can't be changed on newer cars (with newer firmware). I can do 1 blink or 3 and that's it.

Premium is limited to 2GB ram and E-sys uses contiguous memory. Pro can use up to 8GB of ram. Another thing you can do is delete or remove kiswb that you are not using so they do not load when E-sys first launches using up memory.

Originally Posted by hoyasaxa

Wait, what? Which is it -- are you saying he just needs to try again, or are you saying BMW updated the firmware in the car and that the number of blinks from a soft-touch on the stalk can no longer be changed?

I am saying new software no longer allows adjustment of blink number.

[hoyasaxa]

Originally Posted by Almaretto

I am saying new software no longer allows adjustment of blink number.

Yeah. That sucks.

[ZPrime]

Originally Posted by Almaretto

Premium is limited to 2GB ram and E-sys uses contiguous memory. Pro can use up to 8GB of ram. Another thing you can do is delete or remote kiswb that you are not using so they do not load when E-sys first launches using up memory.

Guess I need to look into getting Pro. It will never have 8GB to use (system only has 8GB total), but without having it next to me to check, I have to imagine at least 3-5GB are free since nothing else is running other than maybe Chrome with a few tabs.

Can you point me at further information around "deleting or remoting 'kiswb' that I am not using"? I am not sure what "kiswb" are or how I would "remote" them (or delete, if they aren't just files...)

[Almaretto]

Originally Posted by ZPrime

Guess I need to look into getting Pro. It will never have 8GB to use (system only has 8GB total), but without having it next to me to check, I have to imagine at least 3-5GB are free since nothing else is running other than maybe Chrome with a few tabs.

Can you point me at further information around "deleting or remoting 'kiswb' that I am not using"? I am not sure what "kiswb" are or how I would "remote" them (or delete, if they aren't just files...)

I have mine set at 5GB. But, like I said, it is not about what other programs are necessarily running. Java loads up ram and does not clear until program is closed.

http://tokenmaster.blogspot.com/2015...va-64-bit.html

C:\Data\psdzdata\kiswb