12-22-2020, 07:51 PM | #1 |
Registered
0
Rep 1
Posts |
Shift boot leather replacement project
I picked up a shift extension and knob from We Are Likewise. I found that the adapter was just a bit too high for the stock leather boot to snug up against it so I decided to fab up a new one.
Cut, punched and sewn with some supplies and advice from Lonsdale Leather. I used the original boot as a template and measured out an extra inch or so with the added collar. To finish it I drilled holes in the original frame and sewed it right on. Really happy with the result! |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|