THE LARGEST BMW 2-SERIES FORUM ON THE PLANET
2Addicts
2Addicts
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
2Addicts | BMW 2-Series forum Classifieds Commercial Classifieds Engine / Drivetrain / Exhaust / Bolt-ons B46/B48 Bootmod3 + Downpipe/Charge Pipe Combo Deal - $200 OFF + Free Shipping!

Post Reply
 
Thread Tools Search this Thread
      07-25-2019, 12:41 PM   #1
mike@x-ph.com
Joint Chiefs of Staff
mike@x-ph.com's Avatar
United_States
12211
Rep
132,462
Posts

Drives: 2007 e92 335i / 2013 F30 328
Join Date: Sep 2013
Location: Las Vegas

iTrader: (20)

Talking B46/B48 Bootmod3 + Downpipe/Charge Pipe Combo Deal - $200 OFF + Free Shipping!



Why shop with us?
Lowest Price Guarantee: We do our best to always have the lowest price on our website, but if you found an even lower price somewhere else let us know. We will match the other price and thrown in an extra $25 store credit towards your next purchase.

Financing: We offer 6 months no interest financing. Get the products now, pay later. You can at anytime pay the full amount or make partial payments during these 6 months. If after 6 months, you still have balance remaining on your account there will be a minimum monthly payment with interest applied, subject to credit approval.

Customer Service: We offer the best customer service, period! Don’t take our word for it, check out what our customers have to say about Extreme Power House https://www.x-ph.com/customer-reviews/

Hours: We are open 7 days a week from 8 AM to 11 PM Pacific Time.

Contact us:
For any questions you can pm / email Mike@x-ph.com or call 725-221-5267. If you contact us during business hours, expect a reply within the hour. If you contact us outside of the regular business hours, expect a reply within 6 hours.

Chat: Looking for an immediate response to your questions? Go to our website www.x-ph.com and use our chat functionality.

Payments: You can make a purchase directly on our website www.x-ph.com or give us a call at 725-221-5267 and we can process your order over the phone.

Shipping: Expect to get a tracking number from us same day of your order completion. We try our best to get the products delivered to you ASAP. We ship items using USPS, UPS and FedEx. Contact Mike@x-ph.com for expedited shipping options.

Inventory: We stock all the popular products at our Las Vegas warehouse. If item is not in stock, we will get it drop shipped to you directly from the manufacturer’s location.

XPH Rewards:
We now offer Extreme Power House loyalty points to all our loyal customers. Earn 1 point after every $1 you spend with us. Earn more by sharing our website on social media and referring your friends.

Newsletter: Join our newsletter for the latest XPH news, exclusive deals, group buys and coupon codes. We also offer exclusive newsletter flash sales.

BM3+ Downpipe Combo Deal
https://x-ph.com/bootmod3-downpipe-b46-b48-combo-deal/


BM3 + Downpipe + Charge Pipe Combo Deal
https://x-ph.com/bootmod3-downpipe-charge-pipe-b46-b48-combo-deal/





World's First custom flash tuning platform for the BMW F and G series vehicles.

Cloud based solution with a web based interface for use with a laptop or with our mobile apps built for iOS and Android!

Developed and tested in-house from the ground up since its debut in November 2016 with new features and updates being added regularly makes the bootmod3 platform a custom BMW factory DME tuning solution like no other on the market since.

Build the ultimate tune for your B48 engine powered vehicle and go from stock to full race calibration, and everywhere in between, with a map switch in the provided mobile app. bootmod3 calibrates the factory vehicle modules over the OBD port in a matter of minutes in the convenience of your driveway or anywhere internet access is available.

B48 20i:
Stage 1 91 octane: up to 42% HP / 46% TQ
Stage 1 93 octane: up to 46% HP / 48% TQ
Stage 1 E30 octane: up to 53 % HP / 50% TQ
Stage 2 91 octane: up to 50% HP / 48% TQ
Stage 2 93 octane: up to 54% HP / 50% TQ
Stage 2 E30 octane: up to 60% HP / 55% TQ

B48 30i:
Stage 1 91 octane: up to 14% HP / 26% TQ
Stage 1 93 octane: up to 16% HP / 26% TQ
Stage 1 E30 octane: up to 20% HP / 28% TQ
Stage 2 91 octane: up to 16% HP / 28% TQ
Stage 2 93 octane: up to 18% HP / 28% TQ
Stage 2 E30 octane: up to 22% HP / 30% TQ
Stage 2 AGG (Aggressive burble) versions of maps available
Race gas maps are on the way!

bootmod3 app and cloud services offer many unique features not found in any other flash tune including and available TODAY:

One OTS map/tune included with the purchase
Datalogging hundreds of diagnostic channels, up to 40 channels concurrently
Datalog sharing and charting without a need to upload to 3rd party websites or apps using the mobile app or web browser
Cloud based storage for map data and datalogs
Reverting back to stock performance map and re-locking the DME to stock programming
Live Dash - realtime vehicle parameter monitoring via in-app guages
Diagnostics
Read and clear trouble codes in all vehicle modules
Reset learned adaptations (octane, knock, Valvetronic, etc)
ECU power reset
(Optional) Acquire a full OTS Map bundle to gain access to all OTS maps offered (SEE HERE)
(Optional) Custom tuning available through tuners in the bootmod3 Tuner Directory. bootmod3 contains a full map editor so you can tune your car yourself or with your local tuner of choice as well.
Some of the OTS and possible aftermarket turbo upgrade custom map features provided by the bootmod3 platform :


Top speed limiter removal
Exhaust burble adjustments in app on any map (OTS and custom)
Exhaust flap adjustments
Cold start (cat heating on startup) removal for quieter cold start
Cat efficiency check (CEL) removal for de-cat downpipes (for off-road use)
Maps for upgraded turbos
E85, race gas and meth injection tuning
Custom Throttle mapping
B48 engine BMW Vehicles supported (if your B48 vehicle is not listed please inquire with us):
2016–2019 F20/F21 120i/125i
2016–present F22/F23 220i/230i
2016–2019 F30/F31/F34 320i/330i
2016–present F32/F33 420i/430i
2016-present F32/F33/F36 420i/430i
2017–present G30/G31 520i/530i
2017-present G01 X3 20i/30i
2018-present G02 X4 20i/30i
For more info take a look at the FAQ here!

*** bootmod3 OBD WiFi Agent device is not required to use the bootmod3 platform. It is a convenience option that removes the need for using a laptop in the car when using bootmod3's features. If you're looking to simply load a tune on the car without much datalogging and monitoring then using your laptop is the ticket for you.

*** DME removal from the engine bay is NOT REQUIRED

VEHICLE MANUFACTURER WARRANTY AND EMISSIONS DISCLAIMER

Some items used and/or installed by PRO TUNING FREAKS may void portions of your vehicle’s factory warranty. Some items may not be legal for “on highway use”. PRO TUNING FREAKS makes no guarantees to the legality of any parts used for “on highway vehicles” and accepts no responsibility for compliance with the vehicle’s factory warranty.



Downpipe

Key Features:

Now available for the 2016+ BMW 230i / 330i/ 430i / 530i B46 Engine!
Horsepower gains of 14 to 16whp average (gains will vary based on modifications of your vehicle).
Higher Max Horsepower Power Curve
Torque gains of 16wtq average (stock boost) up to over 24 wtq (Software upgrade) (gains will vary based on modifications of your vehicle).
Higher Intial Torque Curve. Torque curve hits faster and higher and longer.
Better throttle response and faster turbo spool up times.
Mandrel Bent 4" piping. Smooth transition to the exhaust system.
100% Stainless Steel Construction
100% TIG welded for better quality welds
Precision CNC machined turbocharger V-Band flange.
Precision CNC machined ball joint flange with straight flow interior (versus factory press formed ball joint)
Stainless steel flex section like factory that allows proper exhaust movement and flexibility.
Mirror polish or brush finish
Available with high temperature black thermal coating to reduce underhood temperatures.
Optional - Additional O2 sensor bung for wideband O2 sensors (comes with pre-installed plug)
Optional EGT sensor bung for EGT gauges (comes with pre-installed plug)
Retains the factory "ball" type v-band connector.
Improved design of "ball" connector for better flow characteristics over factory connector.
Compatible with the factory or aftermarket exhaust systems.
Track tested durability.
Includes all hardware for complete installation.
Limited Lifetime Warranty.

Restrictions in the exhaust system robs horsepower and torque especially on turbocharged cars. Thus, removing as much exhaust flow restrictions will increase horsepower and torque significantly. The factory catalytic converter found in the factory downpipe is a big culprit of this and is a major exhaust flow restriction. The factory catalytic converter is made up of catalyst material formed into "honeycomb" weaves. Exhaust gas must pass through these tiny "honeycomb" weaves on their way to the exhaust system thus causing a major exhaust flow restriction. It also causes turbulence after the catalytic converter which causes the exhaust flow to slow down (which increases restriction). By replacing the factory downpipe/catalytic converter with our Competition Series 4" Catless Downpipe, more power is unleashed! Our dyno testing has shown around 14-16whp average peak gains and upwards of 24wtq peak gains! While peak horsepower is nice to look at on dyno charts, what's more important is the power curve. If you look at the dyno charts, torque hits MUCH earlier and harder. The torque curve is BROADER throughout the RPM band. More usable power. You have more time spent in the RPM band with higher horsepower and torque. This equates to faster turbo spool up (less turbocharger lag) and better throttle response. Bottom line, faster. You will feel the difference instantly.

The factory downpipe utilizes a flex bellow section that allows the exhaust system to move. This eliminates undue stress on the exhaust components like the exhaust system, downpipe, turbocharger and exhaust manifold. Many of our competitors do not feel it is important to keep this. While you do not see any adverse affects right away, over time, the stresses caused by not having a flex section and having a rigid exhaust system will cause premature wear and tear. Any stress failures like cracks will form quicker than usual on exhaust manifolds and exhaust components. Also, without a flex section, the exhaust system cannot properly deflect impact. Especially on lowered cars, whenever the exhaust system contacts the ground, the entire system gets pushed up. Without a flex, you can imagine how much stress is put into exhaust components like the exhaust manifold when the exhaust is pushed upwards. We fully understand that durability of our products is important. Thus, like BMW, we incorporate a flex section into our downpipe. Our flex sections are 100% stainless steel (cheap flex sections only have stainless steel center braids and steel caps) to ensure corrosion resistance.

One of the main features of our B46/B48 downpipe is the CNC machined solid stainless steel billet ball joint. The factory downpipe uses a press formed process to produce the "ball" joint to connect to the factory exhaust. This process can be done very inexpensively when done in large productions runs. Unfortunately, the drawback of this press formed "ball" joint is that the interior of the pipe also mimics the outside. When exhaust flows through a pipe, the majority of the exhaust flow tends to stay on the outer edges of the pipe. Thus, when exhaust flows into the "ball" section, it goes into the valley created by the "ball" joint and then back up the other side. This creates tremedous amounts of turbulence in the exhaust flow right at that section. Turbulence in turn, slows down exhaust flow velocities as well as increase back-pressure. It's a well known fact that with turbocharged cars, you want the least amount of back-pressure while still maintaining high exhaust flow velocities. Why? Because low back-pressure and high velocities allow the turbocharger to spin faster. This equates to reducing turbocharger lag and faster spool times. Throttle response is also improved. We had originally thought to use the same press form process to manufacture our downpipes. However, very quickly we noticed this flaw to the process and decided to CNC a solid stainless steel billet "ball" joint. This allowed us to keep the factory connection while keeping the interior of the ball smooth. This allows the exhaust to flow unrestricted through the "ball" joint. While this CNC solid stainless steel billet was very expensive to manufacturer, our motto at ER is "Performance, no compromises". Our in house testing showed that we did indeed have real world improvements with this new CNC billet "ball" joint and thus worth the extra costs. This is why the N26 downpipes do cost a little bit more than the N20 downpipes as the N20 downpipes do not have the ball joint system but use a traditional slip-fit design which is cheaper for us to manufacturer. The pictures below show the factory "ball" joint cut in half (to show in the interior) versus our CNC solid stainless steel billet "ball" joint.

Since we are able to reproduce the factory "ball" joint v-band connector, our downpipes are designed to fit perfectly with either the factory exhaust system or your aftermarket exhaust system. There are no compatibility issues whatsover. The downpipes will come by default with brushed finish.



Charge Pipe

Key Features:

Increase throttle response and decreases turbo lag.
Lightweight High Grade 6061 Aluminum Piping.
Replaces the factory soft plastic charge pipe that is prone to breaking under high boost.
Throttle body matched 3" piping unlike other brands that use 2.5" piping.
Retains factory style o-ring c-clip lock flange. Precision CNC machined flanges ensures leak free connection to turbocharger and throttle body.
Precision CNC machined MAP sensor and IAT flanges ensures leak free connection.
Charge Pipe features beaded ends and T-bolt clamps to prevent intercooler piping from coming off from boost.
Silicone Hump Hose included.
Optional Type III Hard Black Anodizing (for stealth and OEM look). Hard anodizing helps improve durability of intercooler piping. Resists bent or dented piping.
Compatible with the factory electronic diverter valve.
Includes all hardware for complete installation.
Limited Lifetime Warranty.

Turn up the boost with a tune and find your factory charge pipe break apart? You are not alone as this is a common situation with many enthusiast in this situation. The factory charge pipe is made out of plastic and was not designed to handle the higher boost levels. Well, fear not! The solution is here! Replace it with a higher flowing, stronger aluminum charge pipe! Made 100% of 6061 high grade aluminum, this will never happen again (backed by our Limited Lifetime Warranty)!

Often ignored, charged intake airflow characteristics greatly affect throttle response, turbo lag and ultimately maximum power potential. Smooth bends and minimal obstructions are ideal. We used 6061 aluminum (lightweight) mandrel bent piping to ensure smooth transitions. The upper pipe features a long smooth transition from 2.5" from the turbocharger outlet to 3" to match the factory throttle body, ensuring a smooth transition much like the factory unit. Our competitor's on the other hand run a 2.5" to the throttle body which causes a "step" right at the throttle plate which is not ideal for flow.

All flanges on our charge pipe kit are CNC Computer Machined for precision fitment and quality. The entire charge pipe is TIG welded for strength and beauty.



The B46/B48 Charge Pipe Kit features two charge pipes, the upper and lower charge pipes. Both charge pipes are included in the kit and are required for installation.



1/8" NPT Bungs (For Methanol or Nitrous Injectors):

With the popularity of methanol injection systems and nitrous systems, our charge pipe come with two 1/8" NPT threaded bung (for methanol or nos injectors) welded to our diverter valve charge pipe. This allows quick and easy installation of methanol/nitrous injectors that are used in methanol injection systems and nitrous systems. Each 1/8" NPT bung will come with a plug so that you can run with or without the methanol injector. This is perfect for those who do not have the Methanol Injection yet but plan to do so in the future.

Also, the 1/8" NPT bung can be used as a boost source. Perfect place to connect your boost gauge or other devices to. The N55 engine does not have a pressurize hose or fitting from the factory that you can easily tap into. Now you do! Requires the optional vacuum fitting.

Note - For customers who have the Aquamist Methanol Injection Kit, Aquamist injectors use a 8mmx0.75 thread pitch instead of the 1/8" NPT standard that every other brand uses. If you have an Aquamist Methanol Kit, no worries! We have bungs made specifically for the Aquamist. Specify below if you need Aquamist bungs. Since this affects a very low amount of people, they will be custom made for you and not be regularly stocked. Also, we do not have plugs for these bungs. You will have to already have the Aquamist kit.
Appreciate 0
      08-14-2019, 06:38 PM   #2
mike@x-ph.com
Joint Chiefs of Staff
mike@x-ph.com's Avatar
United_States
12211
Rep
132,462
Posts

Drives: 2007 e92 335i / 2013 F30 328
Join Date: Sep 2013
Location: Las Vegas

iTrader: (20)

bump
Appreciate 0
      09-05-2019, 10:13 AM   #3
mike@x-ph.com
Joint Chiefs of Staff
mike@x-ph.com's Avatar
United_States
12211
Rep
132,462
Posts

Drives: 2007 e92 335i / 2013 F30 328
Join Date: Sep 2013
Location: Las Vegas

iTrader: (20)

bump
Appreciate 0
      10-03-2019, 09:53 PM   #4
mike@x-ph.com
Joint Chiefs of Staff
mike@x-ph.com's Avatar
United_States
12211
Rep
132,462
Posts

Drives: 2007 e92 335i / 2013 F30 328
Join Date: Sep 2013
Location: Las Vegas

iTrader: (20)

Bump
Appreciate 0
      10-22-2019, 09:53 AM   #5
mike@x-ph.com
Joint Chiefs of Staff
mike@x-ph.com's Avatar
United_States
12211
Rep
132,462
Posts

Drives: 2007 e92 335i / 2013 F30 328
Join Date: Sep 2013
Location: Las Vegas

iTrader: (20)

Bump
Appreciate 0
      11-12-2019, 03:27 PM   #6
mike@x-ph.com
Joint Chiefs of Staff
mike@x-ph.com's Avatar
United_States
12211
Rep
132,462
Posts

Drives: 2007 e92 335i / 2013 F30 328
Join Date: Sep 2013
Location: Las Vegas

iTrader: (20)

Appreciate 0
      12-14-2019, 02:39 PM   #7
mike@x-ph.com
Joint Chiefs of Staff
mike@x-ph.com's Avatar
United_States
12211
Rep
132,462
Posts

Drives: 2007 e92 335i / 2013 F30 328
Join Date: Sep 2013
Location: Las Vegas

iTrader: (20)

Bump
Appreciate 0
      01-03-2020, 03:25 PM   #8
mike@x-ph.com
Joint Chiefs of Staff
mike@x-ph.com's Avatar
United_States
12211
Rep
132,462
Posts

Drives: 2007 e92 335i / 2013 F30 328
Join Date: Sep 2013
Location: Las Vegas

iTrader: (20)

bump
Appreciate 0
      01-23-2020, 12:02 PM   #9
mike@x-ph.com
Joint Chiefs of Staff
mike@x-ph.com's Avatar
United_States
12211
Rep
132,462
Posts

Drives: 2007 e92 335i / 2013 F30 328
Join Date: Sep 2013
Location: Las Vegas

iTrader: (20)

bump
Appreciate 0
      02-10-2020, 12:13 PM   #10
mike@x-ph.com
Joint Chiefs of Staff
mike@x-ph.com's Avatar
United_States
12211
Rep
132,462
Posts

Drives: 2007 e92 335i / 2013 F30 328
Join Date: Sep 2013
Location: Las Vegas

iTrader: (20)

bump
Appreciate 0
      02-28-2020, 12:05 PM   #11
mike@x-ph.com
Joint Chiefs of Staff
mike@x-ph.com's Avatar
United_States
12211
Rep
132,462
Posts

Drives: 2007 e92 335i / 2013 F30 328
Join Date: Sep 2013
Location: Las Vegas

iTrader: (20)

bump
Appreciate 0
      03-19-2020, 03:22 PM   #12
mike@x-ph.com
Joint Chiefs of Staff
mike@x-ph.com's Avatar
United_States
12211
Rep
132,462
Posts

Drives: 2007 e92 335i / 2013 F30 328
Join Date: Sep 2013
Location: Las Vegas

iTrader: (20)

bump
Appreciate 0
      04-08-2020, 06:23 PM   #13
mike@x-ph.com
Joint Chiefs of Staff
mike@x-ph.com's Avatar
United_States
12211
Rep
132,462
Posts

Drives: 2007 e92 335i / 2013 F30 328
Join Date: Sep 2013
Location: Las Vegas

iTrader: (20)

bump
Appreciate 0
      04-28-2020, 05:58 PM   #14
mike@x-ph.com
Joint Chiefs of Staff
mike@x-ph.com's Avatar
United_States
12211
Rep
132,462
Posts

Drives: 2007 e92 335i / 2013 F30 328
Join Date: Sep 2013
Location: Las Vegas

iTrader: (20)

bump
Appreciate 0
      05-16-2020, 11:46 AM   #15
mike@x-ph.com
Joint Chiefs of Staff
mike@x-ph.com's Avatar
United_States
12211
Rep
132,462
Posts

Drives: 2007 e92 335i / 2013 F30 328
Join Date: Sep 2013
Location: Las Vegas

iTrader: (20)

Bump
Appreciate 0
      06-04-2020, 12:00 PM   #16
mike@x-ph.com
Joint Chiefs of Staff
mike@x-ph.com's Avatar
United_States
12211
Rep
132,462
Posts

Drives: 2007 e92 335i / 2013 F30 328
Join Date: Sep 2013
Location: Las Vegas

iTrader: (20)

bump
Appreciate 0
      06-23-2020, 03:03 PM   #17
mike@x-ph.com
Joint Chiefs of Staff
mike@x-ph.com's Avatar
United_States
12211
Rep
132,462
Posts

Drives: 2007 e92 335i / 2013 F30 328
Join Date: Sep 2013
Location: Las Vegas

iTrader: (20)

bump
Appreciate 0
      07-13-2020, 03:08 PM   #18
mike@x-ph.com
Joint Chiefs of Staff
mike@x-ph.com's Avatar
United_States
12211
Rep
132,462
Posts

Drives: 2007 e92 335i / 2013 F30 328
Join Date: Sep 2013
Location: Las Vegas

iTrader: (20)

Appreciate 0
      08-03-2020, 05:52 PM   #19
mike@x-ph.com
Joint Chiefs of Staff
mike@x-ph.com's Avatar
United_States
12211
Rep
132,462
Posts

Drives: 2007 e92 335i / 2013 F30 328
Join Date: Sep 2013
Location: Las Vegas

iTrader: (20)

Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 10:33 AM.




2addicts
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST