03-12-2016, 04:11 PM | #1167 |
General
10445
Rep 40,774
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
PM sent.
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
Appreciate
0
|
03-12-2016, 07:33 PM | #1169 |
Lieutenant Colonel
625
Rep 1,753
Posts |
I've searched for this, but I can't seem to find instructions on how to VO code enhanced Bluetooth. I'm gonna give coding a go tonight and wanted to give this one a shot. Any help would be greatly appreciated.
|
Appreciate
0
|
03-12-2016, 07:44 PM | #1170 | |
Major General
1403
Rep 5,262
Posts |
Quote:
E-Sys - How to change FA in F-series car.pdf Step 2. VO Code Head Unit and standalone Combox (CMB_MEDIA) if present: Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Right-Click on Head Unit ECU (e.g. HU_NBT, HU_CIC, HU_CHAMP, HU_ENTRY, HU_ENTRYNAV, etc.) (the ECU itself not the underlying CAFD) => Select CODE (Not Code FDL). Repeat Step 2 above for and standalone Combox (CMB_MEDIA) if present. * Note: 6NS is used for newer Head Unit firmwares >= 07/13. For older Head Unit firmwares, use 6NK or 6NL if car is equipped with BMW Assist. |
|
Appreciate
2
|
03-12-2016, 07:47 PM | #1171 | ||
Lieutenant Colonel
625
Rep 1,753
Posts |
Quote:
__________________
|
||
Appreciate
0
|
03-12-2016, 10:06 PM | #1172 |
Lieutenant Colonel
625
Rep 1,753
Posts |
First successful coding! I VO coded enhanced Bluetooth. I really couldn't tell a difference though. I reread the FA and checked it out in the FA editor. 6NS is there. The updated value is definitely there. I coded HU_ENTRYNAV. Oh well, I think I remember reading that it takes a bit for this to light up?
I did however enable speed and engine temp in BC which is pretty cool. I'll do more tomorrow.
__________________
|
Appreciate
0
|
03-12-2016, 10:10 PM | #1173 | |
Major General
1403
Rep 5,262
Posts |
Quote:
If you don't have the combox then it won't work as you don't really have the hardware In HU_nbt for example everything is on the same time Ecu and there is no cmb_media Should look something like this here in the trunk http://f30.bimmerpost.com/forums/sho...8#post14182448 |
|
Appreciate
0
|
03-12-2016, 11:12 PM | #1174 | ||
Lieutenant Colonel
625
Rep 1,753
Posts |
Quote:
__________________
|
||
Appreciate
0
|
03-13-2016, 07:46 AM | #1175 |
Private First Class
53
Rep 116
Posts |
Still not seeing RFS for reverse lights. Also tried to code in rear fogs by following the pdf in the linked thread and no luck. It is a 2016 M235i with a Dec '15 build date.
http://www.2addicts.com/forums/showt...1071198&page=3 |
Appreciate
0
|
03-13-2016, 10:57 AM | #1176 | |
Major General
1403
Rep 5,262
Posts |
Quote:
RFS_L_KALTUEBERWACHUNG RFS_L_WARMUEBERWACHUNG RFS_L_IS_LED |
|
Appreciate
0
|
03-13-2016, 01:06 PM | #1177 | |
Private First Class
53
Rep 116
Posts |
Quote:
http://www.2addicts.com/forums/showp...&postcount=524 |
|
Appreciate
0
|
03-13-2016, 01:09 PM | #1178 | |
Major General
1403
Rep 5,262
Posts |
Quote:
|
|
Appreciate
0
|
03-15-2016, 01:23 AM | #1179 |
Second Lieutenant
83
Rep 282
Posts |
Hi guys. I'm having some trouble coding my F22 with 6NS, and any help would be appreciated.
1) Successfully installed everything and able to connect 2) Followed shawnsheridan instructions here: http://f30.bimmerpost.com/forums/sho...65&postcount=9 3) Received the following errors when coding "HU_ENTRY" Code:
Caf's suchen Tal wird generiert Abarbeitung wird gestartet TAL execution started. ExecutionID=2016/03/15-01:43:34.359 [] prepareTALExecution started [] prepareTALExecution finished [] prepareVehicleForCoding started [] prepareVehicleForCoding finished [HU_ENTRY - 63] prepareECUforCoding started [HU_ENTRY - 63] prepareECUforCoding finished [HU_ENTRY - 63] authenticateECUforCoding started [HU_ENTRY - 63] authenticateECUforCoding finished [HU_ENTRY - 63 - cafd_000000f9-007_009_006] Transaction type: cdDeploy; Message: TA started [HU_ENTRY - 63 - cafd_000000f9-007_009_006] Transaction type: cdDeploy; Message: TA finished [HU_ENTRY - 63] finalizeECUCoding started [HU_ENTRY - 63] finalizeECUCoding finished [] finalizeVehicleCoding started [] finalizeVehicleCoding finished [] finalizeTALExecution started [] finalizeTALExecution finished TAL execution finished TAL-Execution finished with status: "Finished". [C207] TAL execution finished. Duration: "18s". [C206] MSM update: Read current SVT. [C194] MSM update started. [C215] MCDDiagService<id=378649, job=com.bmw.psdz.jobs.uds.MCD3_ReadF11DataFromMSM, service=RC_GET_PARAMETER_N11 - RoutineControll GetParameter N11, description=error: negative response : requestOutOfRange, link=MSM_ETHERNET> MCDDiagService<id=398649, job=com.bmw.psdz.jobs.common.MCD3_ReadF11DataFromCsmClients, service=RC_GET_PARAM_N11_CSM - RoutineControll GetParameter N11 CSM, description=error: negative response : requestOutOfRange, link=HU_ENTRY_63_ETHERNET> MCDDiagService<id=398649, job=com.bmw.psdz.jobs.common.MCD3_ReadF11DataFromCsmClients, service=RC_GET_PARAM_N11_CSM - RoutineControll GetParameter N11 CSM, description=error: negative response : requestOutOfRange, link=CMB_MEDIA_36_ETHERNET> MCDDiagService<id=378649, job=com.bmw.psdz.jobs.uds.MCD3_ReadF11DataFromMSM, service=RC_GET_PARAMETER_N11 - RoutineControll GetParameter N11, description=error: negative response : requestOutOfRange, link=MSM_ETHERNET> MCDDiagService<id=378649, job=com.bmw.psdz.jobs.uds.MCD3_ReadF11DataFromMSM, service=RC_GET_PARAMETER_N11 - RoutineControll GetParameter N11, description=error: negative response : requestOutOfRange, link=MSM_ETHERNET> MCDDiagService<id=398649, job=com.bmw.psdz.jobs.common.MCD3_ReadF11DataFromCsmClients, service=RC_GET_PARAM_N11_CSM - RoutineControll GetParameter N11 CSM, description=error: negative response : requestOutOfRange, link=HU_ENTRY_63_ETHERNET> MCDDiagService<id=398649, job=com.bmw.psdz.jobs.common.MCD3_ReadF11DataFromCsmClients, service=RC_GET_PARAM_N11_CSM - RoutineControll GetParameter N11 CSM, description=error: negative response : requestOutOfRange, link=CMB_MEDIA_36_ETHERNET> MCDDiagService<id=378649, job=com.bmw.psdz.jobs.uds.MCD3_ReadF11DataFromMSM, service=RC_GET_PARAMETER_N11 - RoutineControll GetParameter N11, description=error: negative response : requestOutOfRange, link=MSM_ETHERNET> MSM update finished. [C216] VCM Update: Write FA to VCM. [C188] VCM Update: Write FP to VCM. [C190] VCM Update: Read current SVT. [C191] VCM Update: Check current SVT with TAL. [C192] VCM Update: Write target SVT. [C193] VCM Update: Write FA to backup. [C189] VCM Update: finished. [C195] Abarbeitung beendet 4) Received the following errors when coding "CMB_MEDIA" Code:
Caf's suchen Tal wird generiert Abarbeitung wird gestartet TAL execution started. ExecutionID=2016/03/15-01:45:00.488 [] prepareTALExecution started [] prepareTALExecution finished [] prepareVehicleForCoding started [] prepareVehicleForCoding finished [CMB_MEDIA - 36] prepareECUforCoding started [CMB_MEDIA - 36] prepareECUforCoding finished [CMB_MEDIA - 36] authenticateECUforCoding started [CMB_MEDIA - 36] authenticateECUforCoding finished [CMB_MEDIA - 36 - cafd_000005b6-004_002_017] Transaction type: cdDeploy; Message: TA started [CMB_MEDIA - 36 - cafd_000005b6-004_002_017] Transaction type: cdDeploy; Message: TA finished [CMB_MEDIA - 36] finalizeECUCoding started [CMB_MEDIA - 36] finalizeECUCoding finished [] finalizeVehicleCoding started [] finalizeVehicleCoding finished [] finalizeTALExecution started [] finalizeTALExecution finished TAL execution finished TAL-Execution finished with status: "Finished". [C207] TAL execution finished. Duration: "6s". [C206] MSM update: Read current SVT. [C194] MSM update started. [C215] MCDDiagService<id=378649, job=com.bmw.psdz.jobs.uds.MCD3_ReadF11DataFromMSM, service=RC_GET_PARAMETER_N11 - RoutineControll GetParameter N11, description=error: negative response : requestOutOfRange, link=MSM_ETHERNET> MCDDiagService<id=398649, job=com.bmw.psdz.jobs.common.MCD3_ReadF11DataFromCsmClients, service=RC_GET_PARAM_N11_CSM - RoutineControll GetParameter N11 CSM, description=error: negative response : requestOutOfRange, link=HU_ENTRY_63_ETHERNET> MCDDiagService<id=398900, job=com.bmw.psdz.jobs.common.MCD3_ReadF11DataFromCsmClients, service=RC_GET_PARAM_N11_CSM - RoutineControll GetParameter N11 CSM, description=error: timeout, link=Physical request to ECU with address 0x36> MCDDiagService<id=398900, job=com.bmw.psdz.jobs.common.MCD3_ReadF11DataFromCsmClients, service=RC_GET_PARAM_N11_CSM - RoutineControll GetParameter N11 CSM, description=error: timeout, link=Physical request to ECU with address 0x36> MCDDiagService<id=398900, job=com.bmw.psdz.jobs.common.MCD3_ReadF11DataFromCsmClients, service=RC_GET_PARAM_N11_CSM - RoutineControll GetParameter N11 CSM, description=error: timeout, link=Physical request to ECU with address 0x36> MCDDiagService<id=378649, job=com.bmw.psdz.jobs.uds.MCD3_ReadF11DataFromMSM, service=RC_GET_PARAMETER_N11 - RoutineControll GetParameter N11, description=error: negative response : requestOutOfRange, link=MSM_ETHERNET> MCDDiagService<id=378649, job=com.bmw.psdz.jobs.uds.MCD3_ReadF11DataFromMSM, service=RC_GET_PARAMETER_N11 - RoutineControll GetParameter N11, description=error: negative response : requestOutOfRange, link=MSM_ETHERNET> MCDDiagService<id=398649, job=com.bmw.psdz.jobs.common.MCD3_ReadF11DataFromCsmClients, service=RC_GET_PARAM_N11_CSM - RoutineControll GetParameter N11 CSM, description=error: negative response : requestOutOfRange, link=HU_ENTRY_63_ETHERNET> MCDDiagService<id=398649, job=com.bmw.psdz.jobs.common.MCD3_ReadF11DataFromCsmClients, service=RC_GET_PARAM_N11_CSM - RoutineControll GetParameter N11 CSM, description=error: negative response : requestOutOfRange, link=CMB_MEDIA_36_ETHERNET> MCDDiagService<id=378649, job=com.bmw.psdz.jobs.uds.MCD3_ReadF11DataFromMSM, service=RC_GET_PARAMETER_N11 - RoutineControll GetParameter N11, description=error: negative response : requestOutOfRange, link=MSM_ETHERNET> [] There was an error, please check the log files.MSM update finished with error. [C217] Error in MSM Update: [] - [Exception - MSM - 10] Errors: TSL distribution failed due to an error: The following ECUs are missing from the TSL because they did not respond: 0x36; FsCSM with diagnostic address 0x36 reports error: error code: ERC_MSM_INVALID_TRANSPORT_LIST, specific error code: empty (F30 key exchange)Error during MSM update. [C214] Errors: TSL distribution failed due to an error: The following ECUs are missing from the TSL because they did not respond: 0x36; FsCSM with diagnostic address 0x36 reports error: error code: ERC_MSM_INVALID_TRANSPORT_LIST, specific error code: empty (F30 key exchange) [1352] VCM Update: Write FA to VCM. [C188] VCM Update: Write FP to VCM. [C190] VCM Update: Read current SVT. [C191] VCM Update: Check current SVT with TAL. [C192] VCM Update: Write target SVT. [C193] VCM Update: Write FA to backup. [C189] VCM Update: finished. [C195] Abarbeitung beendet I removed and paired my iPhone 6 again, still only seeing "Telephone" for the Bluetooth profiles (no "Audio" option). I followed all the steps in the Youtube video for FDL coding as well including taking all the backups. Also tried coding FDL under FEM_BODY (3110, open/close mirror with FOB) but that didn't work either. Code FDL happened without any errors but the mirrors are not closing or opening with the FOB. Thanks for any suggestions. |
Appreciate
0
|
03-16-2016, 01:06 AM | #1180 | |
Second Lieutenant
83
Rep 282
Posts |
Quote:
Tonight I spent a bit more time digging into the Bluetooth settings and noticed something that I missed. In the "Configure Bluetooth" screen the options for "Bluetooth Audio", "Office" and "Additional Telephone" were not checked. These options were not available before. After checking these options I am now able to stream music from my phone. Pics below. So apparently those "MCDDiagService" errors are insignificant because tonight I tried coding again and got them yet again. Now time to do some FDL coding! |
|
Appreciate
0
|
03-16-2016, 10:43 PM | #1181 | ||
Lieutenant Colonel
625
Rep 1,753
Posts |
Quote:
__________________
|
||
Appreciate
0
|
03-19-2016, 08:57 AM | #1182 |
Anticipator
14
Rep 49
Posts |
Hi, the default curb angle is set to 3B; is 2B steeper or less steep than 3B?
__________________
|
Appreciate
0
|
03-19-2016, 09:58 AM | #1183 | |
Major General
1403
Rep 5,262
Posts |
Quote:
3B = 59 2B = 43 |
|
Appreciate
0
|
03-19-2016, 03:51 PM | #1185 |
Lieutenant Colonel
625
Rep 1,753
Posts |
|
Appreciate
0
|
03-19-2016, 04:28 PM | #1186 |
Major General
1403
Rep 5,262
Posts |
|
Appreciate
0
|
03-19-2016, 04:30 PM | #1187 |
Lieutenant Colonel
625
Rep 1,753
Posts |
dang it
__________________
|
Appreciate
0
|
03-20-2016, 06:38 PM | #1188 |
Private First Class
103
Rep 107
Posts |
Tried my hand at coding today, thanks in big part to this thread and the knowledge contained within, so first off thanks to everyone who has has contributed, especially pikcachu.
I managed to code off the iDrive warning @ startup and remove ASD however... I can't seem to connect to the FEM_BODY module and get the following error. Anyone run into this before? |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|