Wagner Catted Downpipe + BM3

123Britt · 05-22-2021, 03:24 PM

Not only does this combo work, competively priced, sounds amazing & provides performance gains -- But Looks amazing as it ages:

For those that don't need "NO Cell" -- BM3 never lets the Cell pop up.

mike@x-ph.com · 05-24-2021, 09:04 AM

Congrats

Possessed · 05-25-2021, 05:03 PM

No issues with the O2 sensor?

mike@x-ph.com · 05-25-2021, 05:42 PM

Quote:

Originally Posted by Possessed

No issues with the O2 sensor?

As far as I know, the sensor issue was fixed years ago

FoodForThought · 05-26-2021, 01:47 AM

Wow, the heat has treated this setup well. An all around great look and clean fitting pipe. Trying to decide between Catless ER or Wagner - this helps! Any vids of how its sounds...sorry if I missed if you posted clips on another thread.

Possessed · 05-26-2021, 07:47 AM

Quote:

Originally Posted by mike@x-ph.com

As far as I know, the sensor issue was fixed years ago

That's not my experience

But I just realized that OP's DP wasn't recently installed, so guess my question was not relevant anyway

Cheers!

123Britt · 05-26-2021, 08:15 AM

One of the (2) O2 wires is very tight; however with a little routing change I did manage to get both O2 connectors clipped back into their holders.
.
I say tight but -- routed without stress on the wire.

My results were similar to this:

mike@x-ph.com · 05-26-2021, 10:24 AM

Quote:

Originally Posted by 123Britt

One of the (2) O2 wires is very tight; however with a little routing change I did manage to get both O2 connectors clipped back into their holders.
.
I say tight but -- routed without stress on the wire.

My results were similar to this:

05-22-2021, 03:24 PM	#1
123Britt Captain 289 Rep 864 Posts Drives: 15 M235i AT Join Date: May 2008 Location: Madison, Alabama iTrader: (0)	Wagner Catted Downpipe + BM3 Not only does this combo work, competively priced, sounds amazing & provides performance gains -- But Looks amazing as it ages: For those that don't need "NO Cell" -- BM3 never lets the Cell pop up. Attached Images
	Appreciate 0 Tweet Quote

05-24-2021, 09:04 AM	#2
mike@x-ph.com Joint Chiefs of Staff 24198 Rep 190,807 Posts Drives: 07-335/12-328/18-M4/21-M4CP Join Date: Sep 2013 Location: Las Vegas iTrader: (23)	Congrats __________________ Check out our current sale by clicking on this link! https://x-ph.com/sale/ Phone number 702-494-9435
	Appreciate 0 Quote

05-25-2021, 05:03 PM	#3
Possessed Enlisted Member 14 Rep 44 Posts Drives: 2015 M235i xdrive Join Date: Jul 2013 Location: Oslo, Norway iTrader: (0)	No issues with the O2 sensor?
	Appreciate 0 Quote

05-26-2021, 01:47 AM	#5
FoodForThought New Member 0 Rep 6 Posts Drives: 2014 M235i Join Date: May 2021 Location: CALIFORNIA iTrader: (0)	Wow, the heat has treated this setup well. An all around great look and clean fitting pipe. Trying to decide between Catless ER or Wagner - this helps! Any vids of how its sounds...sorry if I missed if you posted clips on another thread.
	Appreciate 0 Quote

05-26-2021, 08:15 AM	#7
123Britt Captain 289 Rep 864 Posts Drives: 15 M235i AT Join Date: May 2008 Location: Madison, Alabama iTrader: (0)	O2 Sensor Line - Issue / No Issue One of the (2) O2 wires is very tight; however with a little routing change I did manage to get both O2 connectors clipped back into their holders. . I say tight but -- routed without stress on the wire. My results were similar to this:
	Appreciate 1 Possessed13.50 Quote