08-17-2021, 07:29 PM | #1 |
Registered
1
Rep 3
Posts |
Electric Wastegate Issue After Tuning
Hi all,
I've finally decided to get input on a situation I've been facing for a while. I had my car tuned (stage 2 - FMIC & Catless DP) and the car has been performing very well. However, from the day I picked it up from the shop, I've been getting the following codes: '123432 - Electric wastegate, stop learning: Stop position (wastegate closed) outside of tolerance' '120408 - Boost pressure control: shutdown as a follow-up reaction' The car gives a drivetrain malfunction when this occurs on startup and enters limp mode. The interesting part is I only get these codes after the car has been driven (warmed up) and I turn it on while the temps are still relatively high. If the car is cold and I start it, I never get these codes. Typically once I get the codes after a warm start, I turn the car off and clear the codes and after I turn it back on, I don't get the codes and it drives fine. I'm trying to get a second opinion before I take it to BMW to have them diagnose the issue, but I've been thinking it's the actuator for the wastegate that is bad or if the wastegate linkage needs adjustment. Please let me know your opinions on the issue. 2015 Bmw m235i xdrive (8 spd) tuned with MHD. Thanks! |
08-18-2021, 07:24 AM | #3 |
Private
44
Rep 87
Posts |
I'd find an independent garage to do your diagnosis. Stay away from the Stealership at all costs. Good luck with the issue; you should change out your charge pipe - it's going to bust with that tune.
Chris |
Appreciate
0
|
05-07-2022, 09:49 AM | #4 | |
Second Lieutenant
46
Rep 294
Posts |
Quote:
|
|
Appreciate
0
|
08-17-2022, 08:05 PM | #5 |
Registered
1
Rep 3
Posts |
Sorry for the late reply, but better late than never right? The issue was resolved by adjusting the wastegate using ISTA test plan. There is a test plan that will tell you how to adjust it (2 loosening nuts on the waste gate linkage).
|
Appreciate
0
|
08-20-2022, 05:10 PM | #6 |
Joint Chiefs of Staff
26118
Rep 194,556
Posts |
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
Appreciate
0
|
01-27-2024, 12:44 AM | #7 |
Captain
773
Rep 961
Posts
Drives: OG M2
Join Date: Oct 2017
Location: Orange County, CA
|
How difficult is it to do EWG wastegate adjustment? What has to come out in order to get to the adjustment bolt?
__________________
OG M2 with the OEM M mirror retrofit
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|