12-05-2023, 06:30 AM | #1 |
Major
1381
Rep 1,146
Posts |
TPMS stuck on 99% *** resolved***
guy's
I think I'm having a TPMS problem, 2nd set of winters with non-BMW TPMS I changed the tyres and on the way home it was a few days before I got the old tyres out, when I did I ran a reset it got up to 99% when I got to work when I started home I forgot about it. So Last night, I thought I'd just check the torque on the lug nuts and tyre psi they where all a bit out so I reset it and the tpms, I drove around a bit and got home at 56%, then I drove this morning it started from 56% and got to 99% and just stayed there for ages, got to work parking it didnt move, any thoughts The idrive has a little yellow car with a 2 next to it, no engine warning lights, and when I go into the Check status etc, it shows all green I might try another reset tonight and long drive tonight on the highway ? I haven't checked for codes yet Thoughts Last edited by nazali; 12-05-2023 at 03:38 PM.. |
12-05-2023, 11:26 AM | #2 |
Major
359
Rep 1,056
Posts |
I've noticed that it can sometimes be pretty slow calibrating. I'd give it another try.
Also, I don't think you need to do a reset after adjusting pressure. I adjust my pressure constantly as the temperature changes and it registers the changes no problem. I only reset when I change the wheels in the spring and fall. |
Appreciate
1
nazali1380.50 |
12-05-2023, 11:40 AM | #3 | |
Major
1381
Rep 1,146
Posts |
ok will do !
BTW the amber car icon, DOH, brain fart, reminder for Oil change and Car check Quote:
|
|
Appreciate
0
|
12-05-2023, 03:37 PM | #4 |
Major
1381
Rep 1,146
Posts |
I gave it another try, this time I went the long way home along the highway, 1 junction, think the extra time and speed, did the trick, we are back in action !
|
Appreciate
2
Kernel Kurtz358.50 Mike F.125.50 |
Post Reply |
Bookmarks |
|
|