08-29-2022, 09:05 PM | #1 |
Enlisted Member
1
Rep 43
Posts |
Bootmod3 + RaceChip
Well, I looked for similar posts but didn't see any. Please forgive me if I missed it.
What I am essentially trying to figure out is how much boost in psi does race chip rs add? I just flashed BM3 and I love it, but curious about what psi to limit bm3 to so that I can also use race chip and not absolutely overblow the turbo with too much pressure. I read that the stock psi is between 12-13 psi, and the absolute max is at 22+. I'm looking to sit right around 16-19 for longevity and reliability's sake. Right now I have the RaceChip turned off and BM3 limited at 17 psi. I have a catless downpipe and a charge pipe. Reached out to race chip themselves and asked for specifics regarding numbers on the b46 engine. Also, noticed BM3 disabled revmatching? did anyone else experience this change? |
08-30-2022, 10:41 AM | #2 |
Joint Chiefs of Staff
26118
Rep 194,556
Posts |
It adds up to 5 PSI, i do not recommend running both together as it will add boost blindly, which can cause serious damage.
if you must run a piggyback with a flash tune, get the Jb4 since it can datalog and can be fine tuned
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
Appreciate
1
Jayfig1.50 |
09-01-2022, 12:35 AM | #3 |
Enlisted Member
1
Rep 43
Posts |
After giving it some thought, I just realized its stupid to want to set bm3's boost limit down to accomodate for the piggy back.. makes no sense to do that. A sincere brain fart. I just leave it off and set BM3 to 17psi max. Do you know how i could sell the racechip rs more effectively?
|
Appreciate
0
|
09-01-2022, 09:33 AM | #4 | |
Joint Chiefs of Staff
26118
Rep 194,556
Posts |
Quote:
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
|
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
b46, bootmod3, piggyback, racechip rs |
|
|