04-24-2022, 08:46 AM | #1 |
Major
1381
Rep 1,146
Posts |
BMW wheels
I'm on the lookout for some 18" rim's for my 2 series for next winter
want to put my existing winter tires on them. Any idea what I should be looking for, will any bmw 18's work, for example, I saw an ad for 4 "BMW 8Jx18 FULL SET 5*120 ET24 off set Wheels Bore 72.6 Hub centric" from my spec sheet I found I should have "Standard :Wheels / Tire Data Bolt pattern (BCD) 5x120mm center bore 72.6mm" but not sure of the offset, I "thought my existing ones where 35" I could be wrong, without taking the rim's off and checking, also not sure of the width again from spec sheet I thought they were 7.5Jx18 ET45 any ideas |
04-24-2022, 09:09 AM | #2 |
Major
1381
Rep 1,146
Posts |
I just found a VIN sheet for my car, it shows "2" ?
20X (on the english side) 18"m Law.do.s.spoke 662 M B.j.as (on the german side) 18"m Lmr.do.spei. 719 M B.jet.gz. and realoem only shows 719's confused |
Appreciate
0
|
04-24-2022, 01:08 PM | #3 |
Car Geek
4132
Rep 3,829
Posts |
The standard 2-series offset is ET45 for front and rear 18x7.5" wheels and ET52 for rear 18x8" wheels for staggered fitment.
ET24 will likely rub, but 225/40-18 winter tyres are probably OK up to about ET35 and either 7.5" or 8" wheel widths. |
Appreciate
0
|
04-30-2022, 04:00 PM | #4 |
Major
1381
Rep 1,146
Posts |
I am unhappy again
I scratched up my alloys getting too close to the drive through as you have to turn a corner. BUGGGGGGGGER FUQQQQQQQ I didnt get a chance to put my rim blades on as the weather is yet a bit to cold for the adhesive to dry. Plus I changed my mind on the alloy gators. GOSSSSHHHHHHHH sad I am sad I am mad and I am mad at me |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|