05-14-2015, 06:29 PM | #23 | |
Captain
452
Rep 845
Posts |
Quote:
With regard to tires, 245/35 is a weird size. I run 255/35 square on APEX ARC-8 wheels, 18x8.5, ET 38. They actually fit really well (no poke with some camber, and decent strut clearance) and do not require spacers. There are far more options in the 255/35 size than in the 245/35 size. I happen to be running Direzza II's (not star specs). With regard to wheels, I really like my ARC-8's. They are super light (about 18 lbs a piece) look OEM, and are relatively inexpensive (about 290 a wheel). I would recommend. |
|
Appreciate
0
|
05-15-2015, 01:11 AM | #25 | |
Major General
1412
Rep 5,262
Posts |
Quote:
|
|
Appreciate
0
|
05-17-2015, 05:00 PM | #26 | |
Second Lieutenant
52
Rep 269
Posts |
Quote:
I'm not thinking of selling because of track performance though. I have a 370z that is a fully built track car. I like the M a lot, but I don't really love it. I've just been bitten by the Cayman bug. |
|
Appreciate
0
|
05-22-2015, 08:17 AM | #27 |
Captain
468
Rep 957
Posts |
Yeah Mike,
Thats mine, I am not a big fan of Daytona, since I have a lot of camber dialed in, Plus I was running stock tires so I was just cruising on the banks. Anyway to give you an idea if you run roebling last time I was there I was low 1:22s all day at temps in the mid 80s, with stock brakes. Looking at the data I think there is a 19 in the car with some nt01s and race pads. Hitting 147 in the straight with having to brake about 100 yards past start finish. I had a 991 before this, with the mods this is faster and more fun. I have driven the cayman (new gen) extensively and almost bought one. I like them both a lot. I like the bmw requires more of the driver, with the mods on mine you are well above what the stock traction control and computer systems can handle, so you need to drive it. The cayman is very forgiving and fast, but I just like driving the car myself. Cayman is much lighter and it shows. |
Appreciate
0
|
05-22-2015, 09:38 AM | #28 |
Second Lieutenant
121
Rep 221
Posts |
Does anyone see any issues with going with 235/40-17 with the Kosei rim? The 245/40-17 setup fits, but is a bit tight. I’ll get a little bit more clearance and slightly decrease the sidewall height. The overall tire diameter would be 24.4”. This is 2.8% shorter than my current tire.
|
Appreciate
0
|
05-22-2015, 11:06 AM | #29 | |
Major General
1412
Rep 5,262
Posts |
Quote:
also with 235 you get less tire.... i have the Kosei with 245-40-17 RE-71R and it's tight... but if needed be I will put the 12mm spacers i have for the stock in the front if it's tighter after the LCA install |
|
Appreciate
0
|
05-22-2015, 11:31 AM | #30 |
Second Lieutenant
121
Rep 221
Posts |
I remember the same comment, but there was really no good engineering reason/data to back it up if I remember correctly. Trucks do this all the time. I went significanly up in tire size for my truck, some people go down. The only effect for me was the bigger diameter tire slowed me down.
As a side note 235/40-17 is only 1.6% smaller than the stock 245/35-18 tire diameter. I do agree I get less width, but there is something attractive to me about the 235 width. I like the idea effectively lowering the height of the car by .35" without changing stock geometry, without needing spacers and keeping the sidewall height effectively the same. I'm willing to be the guinea pig to try the combo out, I just want to make sure I'm not missing anything (ie. will it mess up the computer DSC systems). I'll be putting RE-11's or Direzza zII star specs on it. |
Appreciate
0
|
05-22-2015, 03:58 PM | #31 | |
Major General
1412
Rep 5,262
Posts |
Quote:
I really like the re-71r so far but only had it on for a week or so, seem a bit noisier than the PSS |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|