Quote:
Originally Posted by Bee Pee
To confirm, M12 spacers to be used for the F8X TS upgrade are:-
- Material - Stainless Steel
- OD - 1.5"
- ID - to suit M12
- Length - outside 1/4" and inside 1/2"
|
id can be 1/2 or so, (some spacers are like .502) If you look at the stock one it has a large channel, and even with an m12 (oem m3/4) bolt there is still some space. You could play with spacer sizes and that would effect where the ts falls, less on the outboard should bring the wheel in, more on the inboard should bring the wheel out, if your real tight on wheel clearance.