Quote:
Originally Posted by sublimey
Quote:
Originally Posted by david51
Quote:
Originally Posted by Mr. F22
Hi David, thanks for the great thread! Could you explain more what is required for the two side pieces? Want to make sure I understand correctly before I attempt. Is it 1. Remove F82 leather from foam, 2. Remove F22 leather from foam, 3. Apply F82 leather to F22 foam?
I have fitted everything else - here is where I'm at:
Many thanks!
|
Hello,
cool
you can try to do as you say
I kept the original side sides of the F82
if I remember I had modified just the top part by twisting the small metal bar inside but I have no more pictures
|
This is the clip around the knee area that can't be clipped in.
|
I know exactly the struggle you are going through! Even with the metal bar on the backside of the seat bottom removed, the bottom is effectively still "too long" to clip in easily. Keyword: easily. I was able to get it to clip in by pushing the seat bottom in and down simultaneously with full force. Effectively pushing/wedging the seat bottom inward with all my mite so the clips line up and can be secured. It definitely wasn't plug and play but it can be done. Hope this helps!